I have suddenly started getting serious memory loss problems, with the Tablet PC showing warnings and closing down before I can achieve anything. The Page file is shown stuck at zero. I have not been able to change it in the configuration menu. I enter automatic or customised min / max but after a restart the Page file is still '0'.
How do I get the configuration tool working again?
Out of the blue I have suddenly started getting serious low memory problems with warnings and the screen going black soon after startup. My Page file is stuck at zero (which I guess is the cause?) and I cannot change it in the configuration menu. I have tried automatic set, and custom set which appears to have worked except total Page memory stays at zero and is still zero after restarts.
It has been difficult to launch or stay online to search for advice as everything goes blank before I achieve anything. I have the minimum number of programs running.
I have a HP computer and I installed windows 10 about a month and a half ago. Now I cannot log into my computer because it continues to get stuck on a keyboard layout page. Windows came installed originally on my computer so I have no start up disc or anything. And windows 10 I got from the recent download so no disc for that one either. Is there anything I can do to get the screen to disappear? When i try to click on my keyboard or mouse while it is up neither works.
View 1 RepliesWent to bed last night and Windows was fine, after a few initial glitches it's been working without problems for more than a month. This morning, I wake up and it is showing a screen that asks me to choose my keyboard layout which does not respond to any input devices. When I manually power the computer off and back on, Windows says it's starting an automatic repair, then brings up the choose my keyboard layout page again. I can't get past it.
Note that I loaded Win10 from the download and this computer didn't come with OS disks for Win7, so I have no DVD to boot from. I am also going to be very very annoyed if I have to go buy an OS disk, reformat and lose the 20,000 pictures I have stored, It's an HP Pavilion (I can't read the model number right now, it is about four years old), has a quad-core processor.
I cannot get Win10 to go into safe mode from this configuration. As soon as Win10 starts running, it just stops seeing that my keyboard is there at all, so F8 and/or Shift-F8 have no effect -- Windows never sees any input device is there from the time it starts its automatic "repair".
If I do have to reformat and lose everything, or if I have to pay a repair shop to restore it, I guarantee the next computer I buy (and all those I get down the road) will have a fruit with a bite out of it featured prominently on it...
Normally when i use the net all is fine. Noticed today when i run a video convertor programme in the background the loading of web pages is extremely slow. Stop Freemake video convertor and page loading is normal speed. I assumed it was memory, did memtest and no errors found. CPU monitor sits on 100%. Had similar problem with Villisoft last week. Time for a new CPU methinks but having said that would 100% cpu usage slow down webpage loading to that degree.
View 5 RepliesWhen I manually try and make a restore point using the windows program it ends with a property page error.
It still does the restore point ok and seems to work all right if I need to use that point to restore.
No error notifications pop up using the System Restore Point shortcut tool or when system does a restore point when adding new programs or drivers.
So my best guess is the error is showing up because this page is open
Does it on two machines running Home 10586.14
My system has been running fine on windows 10 for a couple of months now, but recently i started getting BSODS without installing new hardware. The BSOD Error is page file in nonpaged area.
I tried taking a look on the dump files myself, I couldn't solve it but this is what I did/found out. The error seems to be BCMWL63A.sys I tried reinstalling my WLAN driver, still bsod (my wlan adapter:asus pce-ac68 ac1900)
The latest dump log is from driver verifier...
Since upgrading to Windows 10, why is my computer so slow to open a file, internet page even after doing a reboot, it is so slow and sometimes doesn't even open.
View 1 RepliesIs it possible to make a .reg file to optimize my visual effects for best performance for all users that sign into one PC?
I want to do this because we have many people who sign into the PC via our Active Directory through the network. If I can get a .reg file that just applies this to all users that would be awesome!
I have a desktop computer, it was working fine almost a year and now from a few days I am having a serious issue and that is when using my computer (generally or during gaming) it displays an error i.e PAGE_FAULT_FOUND_IN_NON_PAGED_AREA. The screen turns pink and the edges are green (that's probably because of the resolution as I use 3840x2160 so the error kinds of destorts) but that's not the real issue, the main problem is the error itself.
My Computer specifications :
Intel i7 4790
Asus Maximus VII Formula ROG
Kingston 8GBx2 DD3 Ram (Simple ones, not the gaming ones)
1TBx2 Seagate HDD
Asus GeForce Titan X
Corsair CX850M.
I was instructed to use Selective Startup to get Quicken installed (didn't work), and now I can't get out!
This is a laptop that has been stuck with the Microsoft account login (cannot fix it as other options are grayed out). I cannot login with my Microsoft login (says password is wrong), but I can get in using just the Admin. acct., with same password.
Using Admin. acct., I cannot get out of Selective Startup, most items are grayed out, or if I can select options (Enable from Disabled), then I get an error that things cannot be changed.
I purchases comp p.c. from flee market when startup, goes to windows sever 2012 screen and askes for admin ,userand password.in russian, ive set my info in bias screen,and can enter that way but cant get past or remove problem ,im green as far as computersgo
View 1 RepliesI have been patiently waiting for a period of 1 hour looking at the screen of my laptop. At this present moment, Windows is stuck 'Scanning and Repairing Drive D: 9% Complete'.
View 5 RepliesI have a issue with windows 10 taking 30+ seconds to load up. It gets stuck on welcome screen and i never used to have this issue before. Here is my logs. It used to take 2-5 sec tops.
Bootlog shows multiple times
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
my cbs log shows
CSI 00004f3d@2016/1/5:16:55:18.218 Primitive installers committed for repair
[Code]....
I have now a couple of windows 10 laptops (using hdd rather than ssd) where the system shows progress to 12% and then waits forever, maybe 2 hours or so before completing.
What is happening, but with the limited info that Windows 10 shows it is hard to estimate how long it will take. At least with chkdsk before windows 8/10, one had something to go on.
reminds me of Vista and defrag where again Microsoft thought it was an improvement to show less information.
I've got an Asus X205TA running windows 10.
Without indication or warning, stuff starts refreshing. Web pages ocassionally refresh on their own, even when I am in the middle of something. Sometimes they get stuck in a refresh loop, and the right/left click stops working (trackpad still registers movement, just no clicks) The little refresh circle spins, and even if the page loads completely, it almost immediately starts refreshing again. I have to hit Control+W to shortcut exit out of the tab, then Control+Shift+T to reopen.
Other times, only the mouse click stops working. I can still navigate with shortcuts, two finger taps (for right click) and the enter/tab keys.
Often these workarounds do the job, but sometimes only a reboot gets it back to working condition.
I've tried 5 different browsers - IE, Edge, Vivaldi, Chrome, and FF. Same issues on all of them.
The issue also pops up (but less frequently) in file explorer. Pages get stuck in a refresh loop just like the browser. This leads me to believe it is not a browser specific problem.
Isn't the page file supposed to fill up when your system starts running out of RAM? I know there's some preemptive paging, but I'm at 99% even though my RAM usage is 40% (of 8GBs). How come?
View 1 RepliesI can't slowly scroll through my files or make it through an entire before the OS returns my page to the first line of photos. It's practically detrimental to my work-flow as I am a photographer. I can't look through my files to choose my next project with the files suddenly disappearing from my screen.
Is there a system-wide bug, a ubiquitous problem with this, and if so how can I debug it?
I just bought a WD My Passport Ultra and it comes with a copy of WD Backup. Never using backup software I decided to give it a try and see what happens. I had no problems at all until I ended up with a message "These files failed to back up: UPPS.bin, 15.77kb". so I decided to try and find the file, which I found. The question is, what this file does and is it necessary to backup? Probably most of you know where this file is but for those who don't you can find the file at: C:UsersUser NameAppDataLocalMicrosoftWindowsUPPSUPPS.bin.
View 6 RepliesI just upgraded my Windows 8 OS to Windows 10 and it has left.Old.windows folder.with many included files on my Harddrive. I have already backed up and transferred all the files I wanted to keep from that old version and wish to delete that file and all that is in it. But it seems not to allow me to do that. I have tried numerous times with Admin privileges and it still will not allow be to delete.
View 4 RepliesI have a stand-alone .exe file, which I would like to start automatically during booting. Putting a shortcut in the W10 startup folder does not do the job.
View 1 RepliesI have found that windows 10 freezes up when attempting to right click on a file. Example of this is when I right click on a photo folder to rename them. I get the circle and it then goes to not responding. then I have to force quit.
View 2 RepliesI've never liked the concurrent file copy that Windows has had. I drag a season of TV over to a hard drive, drag another season over while that one is copying, and all of them copy slower and slower to all finish at the same time. I'd like a Consecutive copy rather than a Concurrent copy. Seems like a small thing, and rather than installing alternate file management programs (teracopy) I was wondering if there was a slick way to change it natively in WIn10?
View 2 RepliesWhenever I do the File History Backup; at completion it gives me the following message: "Backup encountered a problem while backing up file C:UsersAdminSkyDrivePictures. Error: (The system cannot find the path specified. (0x80070003))". I believe this occurred for the first time after I upgraded from Windows 7 to Windows 10. I no longer have a SkyDrive folder it was replaced with a OneDrive folder. For some reason it is still looking for the SkyDrive folder. In the "Exclude from File History" screen I am unable to exclude the SkyDrive folder. I guess that doesn't surprise me because I no longer have SkyDrive folder. How then do I prevent this error occurring when doing a File History backup?
View 4 RepliesIt starts at around 300MB/s but after a second it drops to 20MB/s. On Windows 7 it was usually around 100MB/s. This is for transferring to second hard drive. It's even slower transferring to USB drive, about 2 MB/s.
View 9 RepliesI currently encountering a problem restoring files from the shadow volume. I do not see any version history when I click the previous version history tab. Using a third party tool like shadowexplorer I am able to see the previous versions. Exporting the files out from the shadow volume also is incomplete with file errors. Any way for me to restore fully some files from the shadow copies ?
View 3 Replies