Performance :: Recovery USB Media / Drive - Control Panel (Backup And Restore)
Feb 10, 2016
Windows10 Recovery USB Media/Drive - Control Panel ( Backup & Restore )
I have upgraded to Windows 10 from Widows 8.1 (pre-installed) , on my "ACER Aspire E1 472P- 6491" laptop by taking advantage of the free upgrade offer and successfully activated Windows 10 . I do not have a Windows (8.1 or 10) product key , as the Windows was pre-loaded on the laptop .
Now I want to make a " Windows10 Recovery Drive ", which can be used later to boot/re-instal Windows10 in case my Laptop fails to boot or to reset/troubleshoot any problems on Windows10 . Accordingly I tried to Create Factory Default Backup via Control Panel ( Backup & Restore ) option, but I found that it is meant for Windows 7 or 8.1 only ( which means that the system can be recovered back to Windows 7 or 8.1 only - not Windows 10 ) .
Why Backup & Restore is meant for Windows 7 only , when I have upgraded to Windows 10 already . In fact I have upgraded to Windows 10 from Widows 8.1 ( not Windows 7 ), then why it is taking me back to Windows 7 ? Can I not create a Recovery USB Media/Drive Backup for Windows10 for future use , after I have upgraded to Windows 10 ? If not , then how to make a Windows10 Recovery USB Media/Drive .
a) After upgradation to Windows 10 , why Control Panel ( Backup & Restore ) option is meant for Windows 7 ( or 8.1 ) recovery .
b) How to create Windows10 Recovery USB Media/Drive Backup that will work to boot/re-instal Windows10 in case my Laptop fails to boot in future .
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
I am unable to find my Control Panel today. I see the words control panel when I right click on the menu after clicking on the start button. But nothing happens. It does not open. I have been researching it all day but to no avail. I am using an Acer laptop and I updated to Windows 10 last July. I have had this control panel until today. How to restore it?
I cannot find the Control Panel option to turn on Media Streaming. I have gone into the advanced settings but the option is just not there....This is all the screen shows....no Streaming option.I have the latest Win10 ver 1511, build 10586.14 which came out a couple of weeks ago.
Just bought a new Windows 10, Office 2016, Ultra HD Lenovo computer. Already having issues, surprise surprise! Not only are there scaling/blurry issues with some apps, but Windows Backup and Restore is displaying the following error:
The semaphore timeout period has expired.
I'm trying to backup to an external Seagate drive.
I've tried several fixes as I was previously having this issue too ([URL]), but nothing has worked.
I am in of a "Free Back/Recovery Program" that is so EASY as pie to understand. I want to backup my pc and also be able to restore and all of this has to be easy for me to run it. I will be backing up onto my external harddrive.I have tried Acronis True Image and to hard to recover back my partitions and etc..
I Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
I've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
I've noticed after upgrading Windows 7 to 10 that Backup and Restore (from 7) remains available in the Control Panel. The app appears to work, but I tried running a backup, including system image, on a friend's system and heard that it failed. I haven't looked at it yet, but wondered if perhaps this app doesn't work properly in Windows 10?
I have recently had to re-install Windows 10 and had problems before so decided this time to do a clean install and then run the system image backup. This went well but when it came to the testing of the restore a problem arose. I was using the Repair Disc created after the system image backup completed and could not understand the source file indicated was not where I had put the backup. The restore said the file was on the C: drive which was what I was trying to restore to.
So I've completed the upgrade from 8.1 pro to Windows 10 pro. I want to do a clean install so I went to control panel to create a recovery drive. After clicking next through the first screen it appears to search for eligible drives to backup to (I'm just assuming here, and I do have a 32GB USB drive plugged in), then just gives up and says it can't do it. No explanation of what went wrong. So I guess no clean install for me..
We were all excited to get Win 10 and did a clean install, and finally after some time got everything worked OK. At least for my Lenovo Y40-80 it took some time. Now that I am adding software to focus on using most of this laptop. I wanted to make sure I create a system image that is this time in Win 10 to restore if something messes up in the near future.
However, this was a win 8.1 pc and never had win 10 restore in its restore partition that is the built-in Lenovo Restore & It has no CD/DVD Drive to create Natural Win 10 Repair Disc to boot from. So I am trying now to create a "Recovery Drive" on an external USB to keep however since I can't create a Win 10 Repair disc without CD/DVD Drive, how am I going to have access to this Win 10 backup if I have to restore to this point??
Finally I also don't have any clue that; even if I took the risk, and restored back to original Win 8.1 - is it going to be possible to pass again to Win 10 clean install.
Will it be possible without any Win 10 key? What key it passed on to when it did clean install to Win 10 this past september when I did my free upgrade...
How to manage to create a win 10 native backup and were able to restore it without having to go back win 8.1 partition.
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
I have tried several times to create a system recovery drive on a USB.
Followed the instructions to the letter, and used two different brand, brand new USB's.
After initial start up it says I need a USB with at least 8 GB capacity, which these USB's have. But nothing happens, it just keeps asking for a USB after one has been inserted.
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good -The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked. -I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
I have upgraded a Win 7 and a Win 8 computers to Win 10. On the Win 7 I used an 8 GB USB Drive for Recovery and it did not use all of the space. On the Win 8 computer I'm getting a message that I need a 32 GB drive. I understand that it may also be backing up my Win 8 information, but 32 GB seems way too much. I hate to waste money on a drive that is not needed.
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10 It' s a custom built pc with: i7 4770k GeForce GTX 770 2GB 8gb RAM 230 gb of SSD (primary drive) with still 70gb of free space 1 Terabyte of Hard disk (secondary drive) 230 gb of external TrekStore drive (NFTS formatted)
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive". Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
Now that I've got Win10,, I was looking around and clicking on stuff to see what was under the hood, I found that you can get to the Old Control Panel like in Win 7, problem is I don't remember how I got there. I don't particularly care for the new Settings menu in 10 but I guess if there is't enough complaints about it, I guess were stuck with it. I do like 10, there are some issues but just like with new stuff, you get bugs.