I've backed up my registry twice recently, and I noticed a huge difference in the size of the backup file. Two days ago, the backup I created was 18,066 KB. The one I created this morning is 247,691 KB. Should I be concerned about this, and, if so, what can I do about it?
View 3 RepliesI just bought a WD My Passport Ultra and it comes with a copy of WD Backup. Never using backup software I decided to give it a try and see what happens. I had no problems at all until I ended up with a message "These files failed to back up: UPPS.bin, 15.77kb". so I decided to try and find the file, which I found. The question is, what this file does and is it necessary to backup? Probably most of you know where this file is but for those who don't you can find the file at: C:UsersUser NameAppDataLocalMicrosoftWindowsUPPSUPPS.bin.
View 6 RepliesWhenever I do the File History Backup; at completion it gives me the following message: "Backup encountered a problem while backing up file C:UsersAdminSkyDrivePictures. Error: (The system cannot find the path specified. (0x80070003))". I believe this occurred for the first time after I upgraded from Windows 7 to Windows 10. I no longer have a SkyDrive folder it was replaced with a OneDrive folder. For some reason it is still looking for the SkyDrive folder. In the "Exclude from File History" screen I am unable to exclude the SkyDrive folder. I guess that doesn't surprise me because I no longer have SkyDrive folder. How then do I prevent this error occurring when doing a File History backup?
View 4 RepliesI've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
My 32GB Windows 10 Home PC (recently upgraded from 8.1) is low on disk space. I deleted Windows.old and I have hibernation disabled. Apart from a few browsers, very little else is installed, yet I only have 11.7GB left?
One reason may be the size of the Windows folder:
Size 14.7GB
Size on Disk 9.91GB
From my calculations, Windows appears to be using the higher figure in determining available disk space.
Why is 'Size' so much greater than 'Size on Disk', can I do anything about it? I have a similar 8.1 machine, it does not have this disparity (12.4GB and 12.3GB).
What would be a normal 'Size' for a Windows folder on Windows 10 Home PC very recently upgraded from 8.1 i.e. with few, if any Windows live updates run ?
I have a new HP Pavillion desktop PC. I downloaded Ccleaner today and while tinkering, I "Fixed" a few registry problems . It is unable to access the registry to restore using the Merge option in the context menu. I tried typing in the whole path to the file at the CMD prompt with the same results.
View 4 RepliesI have been working with windows 10 X64 PRO for a little bit now. I can still not figure out why my scripts (.vbs) or .exe that I push to or use on my domain machines will not edit or create keys in the registry. The only way i can do it is to full kill UAC then reboot then make changes then turn it back on then reboot again. Listed below our the UAC settings we have set for our select few windows 10 machines. We have UAC fully off in windows 7, but it is needed in windows 10 to have apps run.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem]
"ConsentPromptBehaviorAdmin"=dword:00000000
"ConsentPromptBehaviorUser"=dword:00000000
"EnableInstallerDetection"=dword:00000000
[Code] …..
What I need to do so i can make registry change on the fly. This going to be a big deal breaker for us to move to Windows 10 if i can not change values.
For some reason, I cannot import this registry script I made. Syntax seems to be correct. I'm thinking it's most likely an invalid key somewhere. Look at the attachment, what is causing this error: "The specified file is not a registry script."
View 2 RepliesI recently upgraded to Windows 10 and after a week noted that my C: drive had a new System Recovery folder that was about 10GB in size. Currently, the folder has reached 20GB and I noted that daily multiple recovery files of 34MB are added. Since my C: drive is an SSD with limited storage, how to put an upper limit on the size of this folder or alternatively, how to delete the folder without losing significant Windows 10 functionality?
View 15 RepliesI've recently upgraded from Windows XP to 10 (64-bit), and the .reg files I've crafted for adding custom file associations don't work anymore. What's changed? How do I make them work again? Sample:
Code:
Windows Registry Editor Version 5.00[HKEY_CURRENT_USERSoftwareClasses.pdf]@="user.sumatra.pdf"[HKEY_CURRENT_USERSoftwareClassesuser.sumatra.pdf]@="PDF Document"[HKEY_CURRENT_USERSoftwareClassesuser.sumatra.pdfDefaultIcon]@="F:BINSumatraPDFSumatraPDF.exe,1"[HKEY_CURRENT_USERSoftwareClassesuser.sumatra.pdfshell][HKEY_CURRENT_USERSoftwareClassesuser.sumatra.pdfshellopen][HKEY_CURRENT_USERSoftwareClassesuser.sumatra.pdfshellopencommand]@=""F:BINSumatraPDFSumatraPDF.exe" "%1""
I am puzzled by the term backup when you go to Settings > Backup.
I have a folder on my NAS defined as my backup drive.
I have set the time interval to every ten minutes until I am sure of what is being backed up.
Does the backup process store MY files as opposed to WIN 10 files in that folder and could be used to restore them if I had to re-install Win 10?
Just bought a new Windows 10, Office 2016, Ultra HD Lenovo computer. Already having issues, surprise surprise! Not only are there scaling/blurry issues with some apps, but Windows Backup and Restore is displaying the following error:
The semaphore timeout period has expired.
I'm trying to backup to an external Seagate drive.
I've tried several fixes as I was previously having this issue too ([URL]), but nothing has worked.
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
What is the name of the folder where my Live Mail contacts are stored?I've lost them & I'm hoping to restore them from a Backup Image file...
View 1 RepliesI am in of a "Free Back/Recovery Program" that is so EASY as pie to understand. I want to backup my pc and also be able to restore and all of this has to be easy for me to run it. I will be backing up onto my external harddrive.I have tried Acronis True Image and to hard to recover back my partitions and etc..
View 9 Repliesaddressing in order to not lose my data. To give a bit of background, my laptop has 2 internal hard drives, 1 is my main/primary drive which I used for day to day operation and the other was just a backup drive which has a system image of my system.
My main drive failed, and after many horrifying clicking, scratching and high pitch squeals coming from the drive, I can only assume it has failed mechanically and isn't some kind of virus. So now I'm currently left with only my internal backup drive with a system image on it.
I was hoping to use this backup drive as my new primary drive, however I want to keep the files on the backup drive. I checked with my Hirens Boot CD and saw that my backup drive contains everything my other hard drive had, including the operating system contained within the Windows backup folder.
Normally for this I would install windows on another hard drive and then restore my files with the system image. However my laptop doesn't have a system restore disc or a copy of windows, it instead came with partitions on the hard drive which requires erasing my backup and consequently losing all my data.
I finally ask the question, is it possible to use the files currently stored on the backup drive without having to resort to buying a new hard drive to copy the files across and then partitioning my backup drive?
I am trying to backup my data (not a system image) to an external hard drive Although I have succeeded in backing files up the system does not work automatically (as it implies it will) and the only work around seems to be to select an alternative drive each time.
In addition if I use File History to attempt a backup the system appears to write to the external hard drive but nothing gets recorded. There is sufficient space for the data (12GB - hard drive total size 120GB) so I do not think it is lack of space.
In Win 7 the default hibernate file size is 75% of RAM.
I have 6 GB RAM, dual boot Win7-x64 and Win10-x64.
6 GB RAM shows as installed in both OS's (it's not a hardware reserved issue).
Win10 set the hiberfil.sys to 2.39 GB.
Win7 set the hiberfil.sys to 4.49 GB.
Is this as expected, or do i have an issue ?
My wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 RepliesI made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 RepliesLong story sort I kind of messed up my GPT partition table. I have backed up an image of my Boot partition only (C:) and not any other partitions such as bootloader etc...
So my question is, would I be able to start all over, re-format the drive from Win10 installation media and do a clean install, then paste my backup onto just the boot partition leaving everything else in tact? I know how to rebuild the bootsector in case I can't boot.
Edit: Wasn't sure if this should go here on into the Install section, mods feel free to move it if needed.
I have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
Now that my computers are updated to Windows 10 , are the old back up disk images with win7 of any use ? Can they even be used to revert back to Win 7 ? Should I just delete them and make new disk image with win 10.
View 6 RepliesI've noticed after upgrading Windows 7 to 10 that Backup and Restore (from 7) remains available in the Control Panel. The app appears to work, but I tried running a backup, including system image, on a friend's system and heard that it failed. I haven't looked at it yet, but wondered if perhaps this app doesn't work properly in Windows 10?
View 6 RepliesI just upgraded from Windows 7 home premium to windows 10. When the automatic backup that I had scheduled under windows 7 ran, I got an error. When I try to run backup manually, I get an error saying that I don't have enough space. My C drive is a 745 GB drive with only 128 used. My backup drive is one TB with 438 used and 656 free. I would think that would be enough space. It always worked under windows 7. What do I do?
View 3 Replies