Performance :: Resource Protection Found Corrupt Files

Nov 13, 2015

just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?

I looked up the log on my system but it's just a really big lump of text.

View 5 Replies


Similar Messages:


SFC / Scannow - Windows Resource Protection Found Corrupt Files

Dec 8, 2015

After scannow, i have : Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogsCBSCBS.log.....
 
what should I do with this ?

View 3 Replies

Response For SFC Scan - Windows Resource Protection Found Corrupt Files

Jan 16, 2016

Response following sfc scan, windows resource protection found corrupt files, but was unable to fix some of them. I have the CBS log, but don't understand any of it.. I looked at an article that said replace files with a new copy, and I didn't understand that!

Attached Files

 sfcdetails.txt   222.12KB
 dism.log   348.56KB

View 3 Replies

Corrupt Files Found By SFC Cannot Be Repaired

Nov 1, 2015

I have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC.  The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
 
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found.  I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
 
 CBS Extract.txt   27.04KB

View 3 Replies

Found Corrupt Files But Unable To Fix Some

Nov 7, 2015

I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.

View 3 Replies

14279-Win Resource Protection Couldn't Start Repair Service

Mar 5, 2016

have tried a number of commands and started all of my services.

View 9 Replies

Performance :: Updates / SFC And Corrupt Files

Jan 15, 2016

After almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.

View 1 Replies

Performance :: SFC Finds Corrupt Files But Is Unable To Fix

Sep 4, 2015

I ran sfc /scannow in an admin command prompt, however when it completes I receive this message:

"Windows Resource Protection found corrupt files but was unable to fix some

of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For

example C:WindowsLogsCBSCBS.log. Note that logging is currently not

supported in offline servicing scenarios."

I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.

View 9 Replies

Performance :: Corrupt Files On 3 Computers After Upgrading To TH2

Nov 15, 2015

can some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...

Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.

C:WINDOWSsystem32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.

View 9 Replies

Performance :: SFC / ScanNow Corrupt Files And DISM Fails

Aug 26, 2015

Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.

DISM

Error: 0x800f081f

The source files could not be found.

Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:WINDOWSLogsDISMdism.log

Scannow

Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.

Note that logging is currently not supported in offline servicing scenarios.

View 2 Replies

Performance :: How To Permanently Disable System Protection

Dec 24, 2015

I use Macrium Reflect for image backup and want to permanently disable system protection. I have used the control panel to turn off system protection several times now but have noticed that for some reason periodically it gets turned back on. I have turned it off and then did a restart and it was still off but then several days later I checked and it was back on so I'm not completely sure what is triggering it to turn back on. Is there any way to turn it off so it doesn't come back on by itself?

View 9 Replies

Performance :: Move Up Or Down Hard Drives Within System Protection

Nov 15, 2015

How to move up or down " hard drives within the System Protection "

Picture is provided, I like to permanently move the C: Hard Drive above the D: Drive maybe there is a windows registry adjustment or something?

Windows 10 LTBS-N (64-bit)

View 7 Replies

Corrupt Files After Scan

Oct 25, 2015

Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.

CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)

[code]...

View 1 Replies

SFC / Scan Now - Always Reports Corrupt Files

Mar 27, 2016

Does SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive  with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.

View 2 Replies

Apps :: Downloaded Files Won't Open - Corrupt

Aug 19, 2015

I've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.

I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.

View 1 Replies

SFC And DISM Error When Trying To Fix Corrupt Windows Files

Aug 3, 2015

I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.

I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.

I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).

View 2 Replies

Start Menu Opening Along With Corrupt Files

Dec 19, 2015

As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.

View 4 Replies

BSOD :: Multiple Error Messages - Corrupt Files Can't Be Fixed By SFC

Jan 9, 2016

I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.

I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.

View 5 Replies

Files Missing After Update - No Where To Be Found

Aug 1, 2015

I updated to windows 10 and I couldn't find any of my files. Eventually found them moved in a folder. Once I restarted my computer, all of the files were gone and I had more storage on my computer. These are files as in music, movies, and pictures. They are NO WHERE to be found.

View 2 Replies

Some MSI Files Not Installing Saying Required Module Not Found

Nov 30, 2015

We have written several programs in VB.2010. They all have a setup and deploy project to create the MSI file. There is a launch condition for a specific file.

This same technique is used in many other programs we have. All work in Windows 7, 8, etc. but not in Windows 10.

The file is there where it supposed to be.

Some programs work using the same exact file in Windows 10 and some do not. All work on Windows 7, 8.

The file is QBFC13.dll and is in C:Program Files (x86)Common FilesIntuitQuickBooks Search Target is [CommonFilesFolder]IntuitQuickBooks

View 1 Replies

Program Files (EXE) Not Found By Windows Search

Oct 17, 2015

Program files (.exe) which are not installed (and so don't have a shortcut) are not being found by Windows search. Shortcuts, folders etc with the same name all show up.

Indexing is complete and .exe is defined (as default) in indexing options to Index Properties Only using the File Properties Filter. If I open up the old Windows 8 fly-out style search then .exe are found so they must be in the index.

I found this thread which is the same [URL] .... but the HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFolderTypes registry key doesn't exist in 10.

How to make this work in the normal Windows search? (I'm not interested in any third party search tool).

View 9 Replies

Downloaded Files Disappear - Not Even Found In File History

Aug 9, 2015

Downloaded files disappear in w10 home.They are not anywhere, not even in file history. Recuva revovery software does not show anything.

Alberto Product name:HP ENVY 17 Notebook PC
Product number:G0U21AAR
Serial number:6CF4482BZW
BIOS:F.34-12/19/2014
Keyboard revision:77.35
Total memory:16.00 GB
Processor name:Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz

View 7 Replies

Updates :: Lost Files Found But Wouldn't Open

Nov 30, 2015

I updated to Windows 10 earlier today. I thought I had lost some important work files and some pics of my kiddo from the last 3 months. Found them by looking in the network folder. Copied them to the desktop to remind myself to send a copy to my external hard drive when I got home. Laptop restarted and when it came back on the files were gone. I could search for them and find them but they wouldn't open. In desperation I restored back to Windows 8 in the hopes that they would be found but they are nowhere to be seen. Don't even show up in a search. System restore shows no prior restoration points.

I have about 70 hours worth of work done that needs done by the end of the calendar year, work that I will have to make up on my own time and not get paid for if I can't find these files. I also have the last 3 months worth of pictures of my daughter on there, her birthday trip to the zoo, visit with my sister, things I want to put in her scrapbook.

View 1 Replies

Lost Files - Path Not Found Error Message

Dec 17, 2015

Just had computer upgraded to windows 10. When I try to acces the old shortcuts, I get path not found error message 

View 2 Replies

Cannot Transfer Video Files From External Hard Drive (Item Not Found)

Oct 6, 2015

I just trashed my old computer and built a new one (moved from Windows 7 to Windows 10). I had quite a few files I wanted to keep, so I stored them all on an external hard drive. I can play the video files in question from the external hard drive, but when I try to copy the files to my internal drive (so that I can store my external safely) the transfer rate quickly drops to zero and then after a few seconds a pop up tells me that the file cannot be found. I know this to not be true since I can still play the files.

View 1 Replies

PC Unable To Start Due To Corrupt Windows Files - Unable To Reformat HDD

Dec 22, 2015

Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved