I Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 RepliesQuestion; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 RepliesMy wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 RepliesI've noticed after upgrading Windows 7 to 10 that Backup and Restore (from 7) remains available in the Control Panel. The app appears to work, but I tried running a backup, including system image, on a friend's system and heard that it failed. I haven't looked at it yet, but wondered if perhaps this app doesn't work properly in Windows 10?
View 6 RepliesWhen trying to create a system image I get the following error?
I have HDD attached but they are encypted with bitlocker. Prior to upgrade I had no issues.
I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
View 9 RepliesDo i have to remove windows 7 from my computer before i can system image W10 ?
View 1 RepliesJust bought a new Windows 10, Office 2016, Ultra HD Lenovo computer. Already having issues, surprise surprise! Not only are there scaling/blurry issues with some apps, but Windows Backup and Restore is displaying the following error:
The semaphore timeout period has expired.
I'm trying to backup to an external Seagate drive.
I've tried several fixes as I was previously having this issue too ([URL]), but nothing has worked.
I made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
I've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
I have a problem with windows system image backup. My OEM windows 8.1 was installed on normal HDD with mbr partition config. so i bought an SDD make an image back up from my drive c. and then use windows DVD to recover(install) the image on new SDD.
Now after i upgrade to windows 10 i learned that i could change mbr to GPT and use EFi boot instead on using old legacy boot option. Now after doing all these without reinstalling windows(cause I cannot go back to win 8.1 anymore)
I decided to make a image back from windows 10 so i can restore to it in future. The problem is every time windows tries to make an image, when it start to make an image from EFI partition it ran into this error : (the specified backup disk cannot be found) 0x807800c5
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
Is there a way to backup and restore all local and group policies entered in Windows 10?
Is there a way to share local and group policy settings in Windows 10?
I searched for Powershell scripts that can be used to change local and group policies but could not find any .ps1 scripts.
What programming language can be used to change local and group policies in Windows 10 so that it would be easier to customize new installations?
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10
It' s a custom built pc with:
i7 4770k
GeForce GTX 770 2GB
8gb RAM
230 gb of SSD (primary drive) with still 70gb of free space
1 Terabyte of Hard disk (secondary drive)
230 gb of external TrekStore drive (NFTS formatted)
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
Windows10 Recovery USB Media/Drive - Control Panel ( Backup & Restore )
I have upgraded to Windows 10 from Widows 8.1 (pre-installed) , on my "ACER Aspire E1 472P- 6491" laptop by taking advantage of the free upgrade offer and successfully activated Windows 10 . I do not have a Windows (8.1 or 10) product key , as the Windows was pre-loaded on the laptop .
Now I want to make a " Windows10 Recovery Drive ", which can be used later to boot/re-instal Windows10 in case my Laptop fails to boot or to reset/troubleshoot any problems on Windows10 . Accordingly I tried to Create Factory Default Backup via Control Panel ( Backup & Restore ) option, but I found that it is meant for Windows 7 or 8.1 only ( which means that the system can be recovered back to Windows 7 or 8.1 only - not Windows 10 ) .
Why Backup & Restore is meant for Windows 7 only , when I have upgraded to Windows 10 already . In fact I have upgraded to Windows 10 from Widows 8.1 ( not Windows 7 ), then why it is taking me back to Windows 7 ? Can I not create a Recovery USB Media/Drive Backup for Windows10 for future use , after I have upgraded to Windows 10 ? If not , then how to make a Windows10 Recovery USB Media/Drive .
a) After upgradation to Windows 10 , why Control Panel ( Backup & Restore ) option is meant for Windows 7 ( or 8.1 ) recovery .
b) How to create Windows10 Recovery USB Media/Drive Backup that will work to boot/re-instal Windows10 in case my Laptop fails to boot in future .
I found out that since I replaced my motherboard, due to OEM, my win 10 license is no longer genuine.I contacted microsoft, and the guy told me to revert back to my old version of windows, which was 8.1. The problem, though, is that when I go to "Backup" under settings, it doesn't tell me that I can revert back to 8.1, but rather windows 7. The guy from Microsoft told me that he wouldn't revert himself, since he doesn't know what would happen.
I'm getting quite tired of not having the genuine windows 10, but I fear going back to 7, since I didn't own a genuine copy of that one too.So, should I try and revert, or is there another way for me to get back my genuine Win10 copy?
So I managed to break my partition table, but I was able to recover my entire C: drive and copy every file and folder to an external drive. My question now becomes, is there anyway to, when I reinstall Windows, to restore from that backup (since it's just a data backup of files and folders, not a system image)? Would booting into linux (so that partition isn't in use by Windows) and simply copy-past-overwriting the old files effectively give me my system back?
View 3 RepliesWindows 10 Home.
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
I run cleanmgr /sageset:65535 & cleanmgr /sagerun:65535 and checked WindowsESD too
There is no more any folder called WindowsESD
Can I re-create it ?
I'm planning on doing fresh install but my internet isn't the best and so I want to backup my bigger Windows Store apps so I don't have to re-download them later (mostly games). Is there some kind of method to get a copy of them and then put them back later?
View 6 RepliesIs it enough to make image from windows location (c: ) Or is necessary to make image from 100 mb windows hidden drive in addition? I want to create an image from my laptop to recover windows when it's corrupt.
View 4 RepliesThe Windows Image Acquisition (WIA) service terminated unexpectedly. It has done this 1 time(s).
That's the Event Viewer error message at every reboot (appears to occur during the shutdown phase).
There is a concurrent fault listed for the Canon scanner driver, CNC210C.DLL, which is not corrupted.
from some reason, a process called "Windows Image Acquisition (WIA), which I've never seen before is running and using about 30% CPU. I read in MSDN that "Windows Image Acquisition (WIA) is the still image acquisition platform in the Windows family of operating systems starting with Windows Millennium Edition (Windows Me) and Windows XP."
Does that mean that from some reason my laptop's camera is running now? Maybe my laptop was hacked?