Performance :: Restore Point - Property Page Error
Nov 29, 2015
When I manually try and make a restore point using the windows program it ends with a property page error.
It still does the restore point ok and seems to work all right if I need to use that point to restore.
No error notifications pop up using the System Restore Point shortcut tool or when system does a restore point when adding new programs or drivers.
So my best guess is the error is showing up because this page is open
Does it on two machines running Home 10586.14
View 5 Replies
Similar Messages:
Dec 10, 2015
how do i schedule system restore point in win 10?
View 2 Replies
Dec 9, 2015
New desktop computer - Windows 10 Home. In System Restore, Configure, the Max Usage slider is all the way to the left.What does that mean?The hard drive is 1 TB, so I'm not concerned about how much it uses.(On my old Windows 7 desktop, I moved the slider to the right and it now saves fewer restore points.)
View 9 Replies
Feb 10, 2016
Is there a way to get Restore Points created automatically periodically? The only ones showing in the Restore Point window are those I created manually. System Update has never created one.
View 8 Replies
Feb 10, 2016
I have restore point space limited to 2Gigs on my Tablet. I've noticed that when a new restore point is created at the top of the list, an old one is removed from the bottom of the list. Sooner or later, I will end up with totally new restore points. Is there a way to save one specific restore point, and not loose it? (without actually backing up (not an option on my Tablet) ).
View 6 Replies
Oct 11, 2015
I see that Win10 has deleted the function to schedule the creation of restore points! Supposedly it creates a new restore point before downloading updates (if the function is turned on; by default it is off!).
I like to schedule the creation of points every few days or each week to prevent viruses from corrupting things. This feature is so important; I can't believe they have hidden it, made it less functional, and turned it off by default!
Is there any way to run the creation button from the task scheduler or something to automatically schedule restore point creation?
View 9 Replies
Nov 28, 2015
I have set up the following in Task Scheduler:-
However it does not work!
How can I enable history?
View 9 Replies
Apr 9, 2015
I installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point.
Source: %ProgramFiles%WindowsApps
Destination: Appxstaging
An unspecified error occurred during system restore. (0x80070057)
View 1 Replies
Aug 28, 2015
I was able to use Instant_Restore_Point under Win 8 (worked great), which I found here: [URL]
But I can't get it to run under Win 10, even after adding (in the appropriate place) these lines:
If instr(objOS.Caption, "Windows 10") Then
GetOS = "Windows 10"
And making the adjustment:If GetOS = "Windows 8" Or GetOS = "Windows 10" Then
How can I get this script to work?
View 5 Replies
Aug 26, 2015
I had 8.1 and now 10, but the issue is with a restore point i did, a program i was using for work was acting up after windows did an auto update.
Did a restore point and now things are not opening right, applications that use to open just hang...i want to reinstall windows 8.1 BUT i dont want to reinstall Photoshop and other essential programs.
I want to restore and keep files BUT if there is an issue with doing that then ill reinstall from scratch.
View 1 Replies
Dec 30, 2015
After the recent (automatic) upgrade to windows 10 ( I have been running windows 10 for months), I can sign in to windows 10 but the desktop that appears with my sign in is something foreign and all my files, pictures and videos are NOT in any folders under Documents. So I thought I would go back to a restore point but am a bit afraid to since I cannot find a Restore file and I don't know how Microsoft and windows 10 works in this are or if my files are included in the automatic backup by the "system restore point" process. Then I thought I should, on my other windows 10 laptops, "create" a restore point from time to time as I feel is needed.
View 5 Replies
Nov 29, 2015
I set tried to set up the mail app. I was not suscessful. Would not sync. No mail from Outlook. I read how to delete the mail app and reinstall it from the shop. I ran the program to do that and it work. It removed the Mal and calendar app.
When I tried to go to the shop app, and down load the current mail app, as instructed, the shop will only stay open 3 seconds and then it will close. I rebooted the computer several times, no avail.
My question is how do I restore my computer to just before I removed the mail app.
View 1 Replies
Oct 21, 2015
My problem is that I cant set a restore point as Windows says some files are missing. So when I try and reset Windows it says it can't find the reset environment.
View 3 Replies
Aug 31, 2015
After restoring my computer back two days using System Restore, I noticed in PC Settings>Personalization>Start>Choose which folders appear on Start, that all the options are greyed out except "Settings". I was wondering if there was a way to fix this? I already tried SFC /Scannow and DISM.exe /Online /Cleanup-Image /RestoreHealth, but neither fixed the problem.
View 4 Replies
Aug 12, 2015
OS is Windows 10 Home version.Want to create a custom restore point.Windows creates restore points by default by still I want to know if there's any way to create a Custom One,that might be like,of a specific Date and Time.
View 1 Replies
Sep 19, 2015
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
View 3 Replies
Aug 6, 2015
I upgraded from Win 7 to Win 10 this past week. All is well except for one thing. I received an update from Microsoft yesterday (Cumulative Update for Win 10 - KB3081424) and noted during the installation that no restore point was created. System Protection is ON and I am able to create restore points manually. Thus, this is only a minor annoyance since I can successfully create these points on my own. However, I would prefer for the system to do so when important updates from Microsoft come down. I guess it is possible that the update referenced above did not generate such a point but found that unusual since it is listed as a Cumulative Update.
View 4 Replies
Oct 29, 2015
Earlier one could create a reset/restore point of time, where is this option located in Windows 10?
View 6 Replies
Aug 3, 2015
I noticed a folder named" Windows.migrated" and I deleted in error thinking it wasn't necessary anymore. This was after i upgraded from windows 8 to 8.1 to 10. Unfortunately it caused ALL my store apps including the default ones to be deleted. I'm a bit lost of what to do now. I don't have a restore point to access.
View 3 Replies
Oct 30, 2015
I have a desktop computer, it was working fine almost a year and now from a few days I am having a serious issue and that is when using my computer (generally or during gaming) it displays an error i.e PAGE_FAULT_FOUND_IN_NON_PAGED_AREA. The screen turns pink and the edges are green (that's probably because of the resolution as I use 3840x2160 so the error kinds of destorts) but that's not the real issue, the main problem is the error itself.
My Computer specifications :
Intel i7 4790
Asus Maximus VII Formula ROG
Kingston 8GBx2 DD3 Ram (Simple ones, not the gaming ones)
1TBx2 Seagate HDD
Asus GeForce Titan X
Corsair CX850M.
View 1 Replies
Dec 16, 2015
I have recently had to re-install Windows 10 and had problems before so decided this time to do a clean install and then run the system image backup. This went well but when it came to the testing of the restore a problem arose. I was using the Repair Disc created after the system image backup completed and could not understand the source file indicated was not where I had put the backup.
The restore said the file was on the C: drive which was what I was trying to restore to.
View 2 Replies
Aug 13, 2015
Do i have to remove windows 7 from my computer before i can system image W10 ?
View 1 Replies
Mar 24, 2015
I have my phone running windows 10 and I don't know why the internet data is not working. It keeps telling me that there is an error with the access point, it says that turning off and on the phone would solve the problem but i have done everything like a thousand times and nothing happens. I can't be on wifi all day.
View 2 Replies
Feb 23, 2016
Normally when i use the net all is fine. Noticed today when i run a video convertor programme in the background the loading of web pages is extremely slow. Stop Freemake video convertor and page loading is normal speed. I assumed it was memory, did memtest and no errors found. CPU monitor sits on 100%. Had similar problem with Villisoft last week. Time for a new CPU methinks but having said that would 100% cpu usage slow down webpage loading to that degree.
View 5 Replies
Jan 8, 2016
I have suddenly started getting serious memory loss problems, with the Tablet PC showing warnings and closing down before I can achieve anything. The Page file is shown stuck at zero. I have not been able to change it in the configuration menu. I enter automatic or customised min / max but after a restart the Page file is still '0'.
How do I get the configuration tool working again?
View 1 Replies
Feb 10, 2016
I recently installed an SSD and I found out while running Samsung's OS Optimization disk that it has turned off System Restore by default. I of course can turn it back on, but I wanted to get feedback on turning on System Restore on an solid state drive.
View 7 Replies
