I am on 64 bit Windows 10 Pro 10586.29. Before the last 2 updates, my system, with a 512GB SSD would shut down in 4 to 5 seconds. Since the last 2 updates, it has gone from a very fast 5 seconds to about 15 to 20 seconds.
View 7 RepliesHave upgraded from Win 7 to Win 10 a few times already and keep going back to Win 7 'cause it system slows down (start up and shutdown) after second reboot on Win 10.
It takes about 30 seconds to load on Win with all kinds of installed programs. Win 10 takes at least twice the amount and i have barely loaded anything yet.
Is there a way to shutdown windows 10 without installing updates? I know previous versions of Windows had command line or registry tricks that worked with this. Note the version of Windows 10 I am using is the normal version you get with the free upgrade.
View 8 RepliesAfter the last major update, my computer upon hitting shutdown, displays a pop-up stating that
"The instruction 0x00007FFFFF66CC60 referenced at 0x000000000000 the memory could not be read - Click okay to terminate" ....
And behind the pop-up, windows is indicating that the DDE Server Window is preventing shutdown. Sits there until the okay to terminate is clicked.
I have multiple PC's running W10 v1511. For some reason at least one of them and I suspect more than one will automatically restart after it has been shutdown. The restart does not occur immediately, in fact, it is several hours before the magic happens! The reason I know it's happening is the system will be in a sleep state when I check it in the morning after I know I shut it down the night before. The PC in question is the one that I have described in my system specs. I know all about the "Wake On" settings in the in the Intel network controller. I have them all turned off (unchecked) but that only effects the system when in sleep mode? Is there some other setting that could be causing the system to refuse to stay shutdown?
View 6 RepliesJust Yesterday upgraded from 8.1 to 10 with out any problems. But, Unless fast start up is disabled, windows will start by itself a few minutes later after I shutdown. Did not have this problem before with 8.1.
Always had fast startup selected, matter of fact, never had to worry about it, had no problems when shutting down, it stayed off until I turned it on. Now since upgraded to 10, the only solution so far to stop the computer from starting up by itself after shutdown, is to disable fast start.
What would cause a windows 10 OS to hang at the Shutdown screen? It just keeps spinning. My on off button won't shut the PC off. This just happened last night. I first did the Start Menut>Power>Shutdown. It took me to the Blue shutdown page and just hung there. It did not completely shut down. I tried the on/off button. That didn't work so I had to shut off the power strip to shut it off.
View 4 RepliesDevice is up to date, however from either the Start menu or Command prompt Windows freezes at manufacturer splash screen on restart, requiring hard shutdown, This returns even after clean install of Windows 10....
View 2 RepliesSince upgrading to w10 from 8.1, automatic shutdown from task scheduler won't work. After googling i can't find a solution.
It is saying "one or more of the specified arguments are invalid" which is strange as it worked in 8.1, all i have in the argument box is /s.
When I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
Windows 10 Installation. Running Slower, 100% Disk Usage? I just installed W10. It seems to be running slower, its using almost 100% of my disk space,
View 1 RepliesWhenever I'm installing a big game(say 28GB), Windows 10 gets bogged down and sluggish. I can't even watch movies without them getting slowed down every now and then. Whatever program/folder I double-click takes a lot longer to open up. I don't recall this happening on Windows 7 Ultimate. Why is this happening?
My Rig:
Windows 10 Pro x64
Phenom II X4 945
nVidia GT630
Seagate 500GB 7200rpm SATA II
Asus M2N68-AM
4GB RAM DDR2
PSU: Generic 500 Watts
Start don't work, and Computer is 5 times slower. We used, sfc/scannow a bunch of times with a restate each time but didn't work at all. We were thinking about uninstalling windows 10 back to Windows 7. The computer ran windows 10 for about 2 weeks just fine and then this happened.
View 1 RepliesI just replaced my old router (Linksys WRT54G) to a Linksys x1000. However, my download speed is slower than the previous router I had. I tried the following things to resolve this problem:
Upgrading to the latest firmware version;Updated my wireless network card drivers to the latest version;Switching between different channels (channel 1 and 5 and default channel). I have set Network Mode to: Mixed and I set Channel Width to Automatic (20 or 40 MHz).
When using my old router I had an average download speed of 1 MB/sec while using the new router I can't get pas 500 KB/sec. In both cases I was sitting next to the router.
Oh, and by the way, there's also a port on the router named DSL. It looks like it doesn't matter whether I connect that port to my modem. How come? What's its function?
This didn't happen right away. They worked fine for a month or so. It is not the ISP, my ISP is very reliable, they consistently give me the bandwidth I am supposed to get. 20MB down 2MB up. The problem laptop averages 0.3MB down and 1.5MB up.
The other hosts on my home network are not having any problems. I have another Win 10 Machine that was upgraded from Win 7 that is working just fine. One Ubuntu client and one more Win 7 client.
Fixes I attempted:
I went to the HP website and applied the recommended updates.
Checked Microsoft updates - none were suggested or required.
I removed and readded the network adapter drivers. Several times.
The hardware in question is:
HP Envy 17t Laptop
OS: Windows 10 Pro Version 1511 (OS Build 10586.36)
Wireless:Broadcom BCM43142 802.11 bgn Wi-Fi Adapter driver: 6.223.215.14
Ethernet:Realtek PCIe GBE Family Controller Adapter driver: 10.1.505.2015
For a while, whenever I connect my wireless headphones using Bluetooth to my Windows 10 laptop, the internet goes a lot slower for an unknown reason.
View 9 RepliesAfter almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 RepliesI followed Brink's tutorial here: Shut Down Computer in Windows 10 And I saw that there are 2 ways to fully shutdown Windows through cmd: /s and /p. What is the difference between these 2, if both of them are said to perform a full shutdown?
View 3 RepliesI have a laptop with 1 USB3 socket and 2 USB2 sockets. The USB3 socket is also a "charging" usb socket.
Now if I plug a USB3 HDD (Toshiba) into a USB2 socket where I've connected a powered USB2 hub I'm getting copy speeds of around 76 mb/s. The same HDD plugged into the USB3 socket is only giving me speeds of around 30 mb/sec. I'm copying the same file from an internal SSD.
So far I haven't seen any advantage in using the USB3 socket over a USB2 powered hub -- is this W10 not having proper USB3 support yet.
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
View 6 RepliesI'm trying to intstall updates for Windows 7 in Control Panel/Check for updates/Install Updates, but Upgrade to Windows 10 is on screen and I can't seem to proceed without the update. I already tried it and I don't like it so backed out. I don't want to upgrade and want it off of my computer. How do I remove it and all the components associated with it? I only use it for personal use, email, Facebook, a few games, etc. and not for business. 10 was too confusing and there's no one over my shoulder teaching me a new system and where all my stuff went.
View 1 RepliesI've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
I am trying to install the .net 3.5 update for my Windows 10 Pro rig. I tried the usual way (enabling) with no luck: the system sits on searching for file and never goes anywhere. (I let it search overnight with no luck). I tried the method suggested HERE with no luck either (it sits there telling me the image version but never starts the "Enabling Features" process. I've let it sit there for 30 minutes with no success.
I am trying to do the second step via a Windows 10 USB install, not a DVD. I didn't bother trying to create an ISO since I didn't think that would matter. In either case, I feel really stuck. I am unable to run a few legacy games because of this stupid .net 3.5 issue. It's really frustrating.
I have Win10 pro and set to "notify to schedule restart" and "defer updates". Also have "give me updates for other MS products..." unchecked.However, Win10 just decided to reboot the computer and apply updates. What the heck is this? I had a major session of work going on.
View 8 Replies