Performance :: Stuck Scanning And Repairing Drive
Jan 7, 2016
I have been patiently waiting for a period of 1 hour looking at the screen of my laptop. At this present moment, Windows is stuck 'Scanning and Repairing Drive D: 9% Complete'.
View 5 Replies
Similar Messages:
Jan 29, 2016
On initial start up had notice to check and repair c drive. It is now stuck at 67% completion and now I am unable to start windows. How can I stop the scanning? I managed to get into the diagnostic pages by pressing the space bar on the start up but non of the action allow me to sttop the scanning process.
View 5 Replies
Jan 8, 2016
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
View 4 Replies
Jan 10, 2016
I was instructed to use Selective Startup to get Quicken installed (didn't work), and now I can't get out!
This is a laptop that has been stuck with the Microsoft account login (cannot fix it as other options are grayed out). I cannot login with my Microsoft login (says password is wrong), but I can get in using just the Admin. acct., with same password.
Using Admin. acct., I cannot get out of Selective Startup, most items are grayed out, or if I can select options (Enable from Disabled), then I get an error that things cannot be changed.
View 3 Replies
Jan 8, 2016
I have suddenly started getting serious memory loss problems, with the Tablet PC showing warnings and closing down before I can achieve anything. The Page file is shown stuck at zero. I have not been able to change it in the configuration menu. I enter automatic or customised min / max but after a restart the Page file is still '0'.
How do I get the configuration tool working again?
View 1 Replies
Dec 10, 2015
I purchases comp p.c. from flee market when startup, goes to windows sever 2012 screen and askes for admin ,userand password.in russian, ive set my info in bias screen,and can enter that way but cant get past or remove problem ,im green as far as computersgo
View 1 Replies
Jan 6, 2016
I have a issue with windows 10 taking 30+ seconds to load up. It gets stuck on welcome screen and i never used to have this issue before. Here is my logs. It used to take 2-5 sec tops.
Bootlog shows multiple times
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
my cbs log shows
CSI 00004f3d@2016/1/5:16:55:18.218 Primitive installers committed for repair
[Code]....
View 1 Replies
Mar 5, 2016
Defender keeps asking me to quick scan my system like every couple hours or so.. Just started happening today.
View 4 Replies
Sep 11, 2015
After upgrading to Windows 10, the scanning on my HP printer doesn't work. The other printer functions work o.k.Should I simply delete the printer and reinstall it?
View 1 Replies
Feb 10, 2016
I have now a couple of windows 10 laptops (using hdd rather than ssd) where the system shows progress to 12% and then waits forever, maybe 2 hours or so before completing.
What is happening, but with the limited info that Windows 10 shows it is hard to estimate how long it will take. At least with chkdsk before windows 8/10, one had something to go on.
reminds me of Vista and defrag where again Microsoft thought it was an improvement to show less information.
View 2 Replies
Nov 22, 2015
This is the event error after attempting to do a regular 'FIND' within the Registry. Before the Fall upgrade installed via .iso on 11/20/2015 this Find worked.
The Nirsoft Registry Scan will scan and find. I did not attempt to link to the registry from that Nirsoft tool
The last software installed was a Nirsoft My Event Viewer as a portable app 11/21/15.It had errors via ntoskrnl.exe when executed. Microsoft apps were updated automatically 11/21/15(Photos, Messaging)
These are the only changes since the fall upgrade Win10-1511
Would this be corrected by a sfc /scannow?
Log Name: Application
Source: Application Error
Date: 11/22/2015 8:14:13 AM
Event ID: 1000
Task Category: (100)
Level: Error
[Code] ....
View 3 Replies
Apr 6, 2016
in windows 7 and windows 8 windows defender is working , we can set removable devices auto scan. but in windows 10 - defender is not having menu options to removable driver auto scan facility.
is there any solution for this, or should i want to change any registry entry to make window defender GUI to previous version of defender.
View 2 Replies
Oct 9, 2015
My PC completely freezes when detecting hardware changes (device manager) after about 3-4 seconds.
I've left it for 1h+ to see if anything happens over time, nothing.
Tried it in safe mode, same problem.
Removed geforce drivers, same problem
When frozen, all lights (and my screens) stay on, pressing capslock on KB doesn't turn the capslock light on/off.
The manually initiated crash still works though, that's how I got the memory dumps in the attachment (usually there is no dump at all and the only way to "fix" it is to press the reboot button several times)
View 4 Replies
Aug 4, 2015
the windows fax and scan utility can't start up because it can't access the documents folder, where it saves the scans.
Then I tried the windows 10 scan app. It saves by default to the pictures folder. It, too, could not save to the default location. but I discovered that I can set it to save to desktop, and that works. But it forgets my choice as soon as I close the app.
I am the owner of these folders. Why can't my apps access them? I checked documents properties, and I have full permissions.
View 1 Replies
Apr 4, 2016
My Bluetooth service has stopped. The device, a speaker, is detected but pairing does not complete after endless scanning. Bluetooth is reported as requiring further installation. How do I do that? Driver update is greyed out.
View 4 Replies
Oct 27, 2015
I have tried several times to create a system recovery drive on a USB.
Followed the instructions to the letter, and used two different brand, brand new USB's.
After initial start up it says I need a USB with at least 8 GB capacity, which these USB's have. But nothing happens, it just keeps asking for a USB after one has been inserted.
View 4 Replies
Jan 2, 2016
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
View 5 Replies
Oct 19, 2015
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to check on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
View 4 Replies
Jan 16, 2016
My ssd c drive is saying I have 51GB of apps & games on my drive & I don't ... How do I fix it ???
View 9 Replies
Dec 23, 2015
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
View 9 Replies
Nov 19, 2015
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
View 9 Replies
Nov 25, 2015
My C Drive Keeps losing Space and yesterday i had 14gb then it went to 799mb and it keeps going down every 5 mins URL>...
View 9 Replies
Oct 13, 2015
I have upgraded a Win 7 and a Win 8 computers to Win 10. On the Win 7 I used an 8 GB USB Drive for Recovery and it did not use all of the space. On the Win 8 computer I'm getting a message that I need a 32 GB drive. I understand that it may also be backing up my Win 8 information, but 32 GB seems way too much. I hate to waste money on a drive that is not needed.
View 6 Replies
Oct 17, 2015
I'm having trouble setting the windows 10 file history drive. The drive I'm trying to use is Y: on disk 4 in the disk management image attached, which shares a 4TB hdd with another two partitions. It uses GPT and is a dynamic disk. All partitions are formatted as NTFS. When I go to file history and attempt to set the drive, only another partition on a different hdd is selectable which I would prefer to not use.
I was able to use this drive for file history up until I reinstalled windows 10 recently, where I formatted down to windows 7 from windows 10 tech preview, then upgraded to windows 10 to activate my old win 7 key. This was done after a recent major hardware upgrade (motherboard/cpu/ram). The 4TB hdd wouldn't have been touched by any of the windows installation procedures and I haven't set any page or hybernation files to it. The only difference is that it's plugged into a different motherboard. The old motherboard was a Gigabyte GA-980FXA UD5 (rev 2101) and the new one is a Gigabyte Z170X-Gaming GT G1 (rev 1).
I've had a look around on the web, and solutions have asked to remove any folders on the partition from libraries, which I have done as far as I can tell, with no success (there weren't any in the first place, but there were some on the other partitions which I've removed). Another solution was to share the partition with full read/write access to everybody. This did work, but it seems like terrible work around rather than a fix.
I'm guessing this might have something to do with the GBT/dynamic nature of the disk, but if that was the case then it shouldn't have worked before the reinstalls as it should still be the same.
View 9 Replies
Nov 26, 2015
I have a HP Stream 11 laptop I bought from Walmart, it came with Windows 8.1 and I went through the charade of upgrading from 8.1 to 10 so it would validate they key and then I immediately did a clean install. Sadly with this laptop, it only has a 32 GB eMMC drive (non-upgrageable), when formatted it is brought down to 28 GB, after the clean install I was at 15 GB, I have installed very very few and rather lightweight applications that at most take up 1 GB. So left with 14 GB, what I have noticed since then... it seems as the updates rolls out, I'm starting to run out of space, I just did the "November 1511" update and I am now down to 5.75 GB free. Is there anything I can do to slim down Windows 10? or Should I just downgrade to a different OS?
View 3 Replies
Mar 5, 2016
I have been using file history on Windows 10. It is very unpredictable. File history is backing up to external drive, but it has coupled the entire "C" drive. In file explorer I have two "G" drives. I thought it only backup recent files not duplicate the drive.
View 7 Replies