Performance :: System Image Check?
Nov 20, 2015How can I check that my system image will work in the case of a crash, Windows 10.
View 3 RepliesHow can I check that my system image will work in the case of a crash, Windows 10.
View 3 RepliesI created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
View 1 RepliesI did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do. I have tried to do create a image on two usb flash drives but i keep getting the same error from windows that this is not a valid location .
View 5 RepliesI made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
I just re-installed Windows 10. I'd prefer NOT to do that any more than necessary, which includes after a Windows upgrade causes a problem.
SO, I'm trying to set up Windows 10 to make a system image (periodically). It WORKS fine, but instead of just taking the system disk, it's ALSO backing up one of my other disks. I BELIEVE it's because the other disk has a page file on it.
I'm putting the main pagefile on the NON-SYSTEM disk because my system is on an SSD and it's recommended (from what I've read) to minimize keeping things on there that get beat on regularly... BUT, as I understand it, any disk that has a pagefile on it is going to be included in the system image. This is a problem 'cause the non-system disk it's backing up has a couple TERABYTES of images on it along with the pagefile.
SO, can I tell Windows 10 Image backup NOT to mess with the other disk?
OR, do I put a little partition on the other disk just to hold the pagefile?
OR, do I just say, "screw it" and put the whole pagefile on the system SSD?
OR, do I find a 3rd party tool to make a system image?
So overall, I was having a issue with creating a system image. It would state that "The specified backup storage location has the shadow copy storage on another volume (0x80780038)"
After reading several forums I found that if you delete the restore points you are able to create a system image.
During my troubleshooting, I was attempting to backup to a 64GBthumb drive (this worked in win8 and win7)..
As I was trying to use the thumb drive, I ran into the following issue..
First it says it needs to be formatted to NTFS. Once I format it to NTFS, it says "The drive is not a valid backup location"
Images I found - [URL] ....
I do not want to use any 3rd party software to accomplish this.
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
I have a problem with windows system image backup. My OEM windows 8.1 was installed on normal HDD with mbr partition config. so i bought an SDD make an image back up from my drive c. and then use windows DVD to recover(install) the image on new SDD.
Now after i upgrade to windows 10 i learned that i could change mbr to GPT and use EFi boot instead on using old legacy boot option. Now after doing all these without reinstalling windows(cause I cannot go back to win 8.1 anymore)
I decided to make a image back from windows 10 so i can restore to it in future. The problem is every time windows tries to make an image, when it start to make an image from EFI partition it ran into this error : (the specified backup disk cannot be found) 0x807800c5
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
I had a Surface Pro 3 running Windows 10 Pro that started giving very poor battery performance and the case was getting very hot.
MS agreed to either repair/replace under warranty but I needed to ship it back.
Before I shipped it back I did a Windows 10 System Image Backup to a USB drive hopeing that if MS replaced with a new Surface pro 3 I would be able to restore the Image to the new unit.
MS has as I thought replaced the Surface Pro 3 with a new one but I am struggling to restore the image to this new one.
It is asking for a recovery Key ?
Am I right in thinking that you can restore the Image to a replacement unit ?
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 RepliesI have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
When trying to create a system image I get the following error?
I have HDD attached but they are encypted with bitlocker. Prior to upgrade I had no issues.
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10
It' s a custom built pc with:
i7 4770k
GeForce GTX 770 2GB
8gb RAM
230 gb of SSD (primary drive) with still 70gb of free space
1 Terabyte of Hard disk (secondary drive)
230 gb of external TrekStore drive (NFTS formatted)
Windows 10 Home.
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
I want to check if I run safe mode. I know that it says "safe mode" in the corner but is there any other way to check?
View 1 RepliesJust when I was happy with my installation I error checked my main C: drive with is a Samsung SSD, Windows reported that it had found some errors and it needed to be rebooted to correct them. I rebooted the PC and the check disk did it's repairs and it booted back in to Windows. I noticed straight away that the start menu had stopped working and when I opened Windows Explorer or did anything within it (like right click properties) or any settings windows like control panel it would take for ever. Opening programs like Internet Explorer work fine.
I have tried System Restoring to before I did the drive repair and sfc /scannow and Dism/Online/Cleanup-Image /RestoreHealth but I still have the problems. The SFC found errors and corrected them but still no Start Menu.
I do have a Trueimage backup from Last Friday which I will have to use if I cannot sort this out. Yesterday due to a on going occasional BSD I had fully uninstalled my Nvidia Geforce Video drivers using a utility that was recommended to me on this forum, I then reinstalled the drivers and it had been fine up until I did the Scan for errors so I don't think it's nothing to do with that.
Whenever I try to create a system image or run recimg I get error 12289 and the backup fails. System protection is turned on and maximum space used is set to 20%. I have no third party backup software installed and this is a real not virtual machine.
PHP Code:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="VSS" />
<EventID Qualifiers="0">12289</EventID>
<Level>2</Level>
<Task>0</Task>
[code]...
Stop and start VSS servicesDelete old snapshots using vssadmin delete shadows /for=c: /all (there aren't any)Re-register VSS DLLsRe-install 9926.
I successfully created the image to an external drive, apparently. It took some time and the moving activity bar moved to completion.Opening the drive there is no sign of the image altho there is one I created last year. Also altho it said that so much of the drive would be used the resulting free space seems the same as before the creation.It is not in my C drive so what has happened?
View 3 RepliesLog Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 16/02/2016 18:18:46
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (70368744177664),(2)
User: SYSTEM
Computer: DESKTOP-J9GASJP
Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
[Code] .....
I had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?
View 1 RepliesI am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:
1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.
2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).
3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)
4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).
5. Windows 10 now loads less all the programs I had installed.
6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.
I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.
I have a custom built system:
Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300
How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.
I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
View 2 RepliesHow do I set up an external HDD to be used for system image backups? For example, specify how many images to keep, schedule the backup, etc. also, can I use the drive for anything else other than image copies?
View 9 Replies