Performance :: System Process Reading Disk 100% And Making System Very Slow
Dec 19, 2015
I found out that the hard disk is 100% utilized. In Task Manager, the process that utilizes the disk the most is ESET Service. If I open Resource Monitor there are many instances of the System process that are reading the disk, not writing it. I have two partitions on my disk - one for the system and the other one for data; the extensive disk reading is done for Pictures (I assigned a folder with pictures, about 140 GB in size, to the system My Pictures folder) on the data partition.
I am not running any tests in the ESET Endpoint Antivirus software and it seems to me that the high disk activity starts when I do not do anything and just e.g. browse Internet or look at something. So, it feels like Windows is doing something, but what it is and how I can influence it. If it were disk optimizations I think I should see also disk writes, not only reads. Could it be that Windows is doing something automatic with Pictures, Documents, etc.?
I wonder what is going on - I dislike the fact that something is going on with the hard disk, making is 100% utilized and making other work very slow and non-responsive.
View 1 Replies
Similar Messages:
Feb 10, 2016
windows 10 professional
This is **NOT** a boot issue, the system boots up just fine and gets to the login screen fast. The issue is the system startup after login, it is takes a rather long time for Windows to become usable. I have tried stopping all NON windows services in msconfig, but this made barely any difference. Even after the system seems to have finished the startup, once I open the browser it then takes ages until it loads the first web page. If I run task manager there is nothing that is hogging the cpu or memory or disk.
I have defragged the disk, although I had to use a 3rd party tool to do this as Windows defrag refuses to do it because it thinks it is an SSD disk due to the 32GB SSD cache.
View 3 Replies
Feb 23, 2016
I just switched to a new motherboard, its an ASRock H97M-ITX/ac. Before I turned off my pc with the old motherboard I uninstalled some devices like the IDE controllers, network adapters, and sound. Then I installed the new motherboard, turned on the pc and noticed right away it was very slow but after a few restarts and installing the new motherboard's drivers it was somewhat faster but I could tell that it still wasnt right. I ran a benchmark on my ssd and got what I think is a really bad result:
Sequential Read (Q= 32,T= 1) : 19.763 MB/s
Sequential Write (Q= 32,T= 1) : 12.059 MB/s
Random Read 4KiB (Q= 32,T= 1) : 6.253 MB/s [ 1526.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 5.544 MB/s [ 1353.5 IOPS]
Sequential Read (T= 1) : 17.194 MB/s
Sequential Write (T= 1) : 11.953 MB/s
Random Read 4KiB (Q= 1,T= 1) : 2.197 MB/s [ 536.4 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 3.296 MB/s [ 804.7 IOPS]
I'm pretty sure this is terrible for a SSD. So I guess I did something wrong. I'm prepared to reinstall Windows, but thought I'd check in here first because it would save some time if I could just fix my current Windows installation. Obviously a clean install would be best but the time involved in getting everything set up again!
View 3 Replies
Dec 4, 2015
I am using a small tablet with Windows on it. It already has little space (32GB which is actually 29 GB), with Windows eating up a ton of space. Now, with a virtual partition on the tablet reserved for system recovery, I have less than 5 GB left, not enough for Windows to update. I would like to merge the virtual partition so as to get ~5 GB extra space, in or to do so I would like to make a recovery disk on a SD-card.
The problem is, Windows does not seem to recognise the SD-card when I try to make a recovery disk! Is there a workaround, or did I get the SD-card in vain?
View 9 Replies
Feb 23, 2016
I have win 10 64-bit home on a 4th gen core -i5 laptop. I have a WDC 1T 2.5" USB3 drive. It is about half full. It used to do 60-70MB/s write speed. Since a few days ago, I noticed it has slowed down by a factor of 5-6 to 10-20MB/s. While copying large files, I watched what's going go. The System and compressed memory process was doing a lot of read and write on the disk. If the copy speed reported by the dialog is say 15MB/s, then system compressed memory process is reading 15MB/s and writing 30MB/s. It looks like this process is reading back the content written and writes back. It is consistent over reboot with several large files from 200MB to 7GB in size.
A couple of weeks ago I did a file backup. I created a 5GB virtual drive on my SSD and dumped all files to be backed up. Took only 5 minutes to copy the 5GB files to the virtual drive and copy the file to the WDC disk, at around 67MB/s, typical of this type of portable drives. While I was wondering what was going on, I tested the same files with a USB3 dock and a 2TB Seagate drive. Write speed is about 150MB/s. So I thought it was not a problem with all disks. The WDC drive has no compress to save space option, BTW. I wonder what's going on. I have AVG antivirus and I turned it off while copying and same slow 15MB/s speed.
View 2 Replies
Aug 2, 2015
I seem to have an issue with one of my system processes using up an inordinate amount of RAM. It isn't causing a lot of issues right now, but it definitely bogs things down here and there. Pictures are of my task manager window on relevant tabs.
[URL] .....
Seems to get worse when I play games. Updated to the Win 10 version of my latest graphics driver (clean install on the driver), and I have restarted my computer multiple times.
View 1 Replies
Oct 27, 2015
I recently got a new pc with the following specs:
i5 6600
Z-170P Motherboard
8GB DDR4
Samsung Evo 850 SSD
I'm finding myself having high CPU usage from system process. Specifically caused by ACPI.sys+0x1e7f0. (Found that through process explorer)
I'm slightly knowledgeable in all this stuff, but this goes a bit too far for me, and I can't figure out what exactly is wrong. It's just annoying to have 25% of my cpu being dedicated to this.
View 1 Replies
Aug 14, 2015
I see a lot of people talk about the system process and say it uses a large amount of ram when they aren't even doing anything, in my case it stays low except when I launch games.
For example I can run CSGO and system won't budge, then I can run League of Legends and itll jump to around 500-700mb or dayz where I've seen it jump to almost 2gb and dayz will actually go down in memory while system goes up. I also don't see any performance hits and when I close the game out it will shrink down to around 100mb.
My question is if this is supposed to be happening, I've found a fix in where I just disable Superfetch and system will never budge past 0.1mb. However I notice things like Skype will start using over 100mb where if superfetch was enabled it would sit at 35mb.
View 1 Replies
Oct 24, 2015
I only noticed the problem a bout a week ago. my CPU was at 100% usage but nothing is taking up the usage. Some of my programs will spike to 50% for some reason but in details theres this system idle process thats taking up 99% of my cpu. I keep reinstalling my pc but the problem keeps popping up.
View 1 Replies
Dec 9, 2015
Recently i installed Windows 10 Pro on a Laptop Compaq Presario c700 with an Intel Celeron M530 and Intel GMA 965 express graphics card,when the laptop is idle and my screen turns off after 5 minutes,the Automatic System Maintenance starts right away and for the limited graphic chipset i think, the laptop remains unresponsive, the keyboard doesn't work, so I can't do ctrl+alt+del, the mouse pointer also disappears, the only thing i could do is a hard turn off, losing all my job....
View 1 Replies
Nov 16, 2015
I've been having this problem for a long time, I've tried resetting my pc to factory settings, didn't work. I tried windows trouble-shooter, didn't work. When I boot I am greeted with a zoostorm logo for about 50 seconds followed by a black screen for 1 minute, and then a windows screen for about 30 seconds. Booting takes about 2-3 mins and even when I'm finally in, my programs load extremely slow and I can only open chrome after a minute otherwise it lags. Remember I have reset my pc so nothing runs on startup apart from steam.
I have a gtx 970 and the latest drivers for it. Also I get 100% disk usage when performing certain tasks. my cpu,gpu and memory never go to such percentage and if they do its because I'm running a very cpu,gpu or ram intensive game. I have not changed anything in my bios since I got my pc and have never done anything to the disk drive (all I know is my HDD is 3tb and has a speed of around 120mb/s) The only thing I have changed on my pc since I got it was an upgrade to windows 10 from 8.1, gtx 970 from a 750ti and a 750w power supply by corsair.
I do not know if this problem happened when I had windows 8.1 but even if windows 10 is the problem there must be a way to fix it as I despise using windows 8.1 anymore. Another thing to note is that loading times for games take a little longer than my friends and my pc is slow at downloading games, my disk usage when installing games is usually 13mb/s and I get 100% disk usage from using 13mb/s. As you can see by this screen shot steam is downloading fallout 4 and 14mb/s of my disk are being used and everything else barely reaches 1mb/s
View 9 Replies
Nov 2, 2015
I am using a Lenovo Y510P, originally installed with Windows 8.1. I upgraded to Windows 10 in July and it worked fine-ish up until now. I have recently (for the past few days) encountered quite frequent BSODs, most of the time with the code CRITICAL_PROCESS_DIED. I tried clean-resetting Windows 10 but the error kept recurring. It happened really randomly, sometimes when I was browsing the web in Chrome, sometimes when I was typing something in Skype, or in Microsoft Word, or sometimes when I just tried to refresh the desktop. So there's really no predicting when it is going to happen
P/s: After rebooting from BSOD, for some reason the system does not recognise any bootable device (and so it tries and fails to boot from my network?). But when I hard-reset the computer by holding the power button the system can boot into Windows again. I used to have grub2 bootloader for my Ubuntu, but after the first of such BSODs it died, somehow, so the system just booted straight into Windows from then on.
View 2 Replies
Sep 3, 2015
I am planning to install Ubuntu, however i wanted to know, if i did dual booting between it and windows, will it slow down?
My specs:
8GB RAM
Intel core I7 4710HQ 2.5 GHz
GTX 860M 4GB GDDR5
1TB HDD and 8GB SSD
View 1 Replies
Oct 23, 2015
Ever since I upgraded to W10, I get this problem wherein if I insert a disk in either of my two optical drivers, it would take Windows forever to read them and if I click them before they complete loading, Windows would become unresponsive and Explorer would crash. Mind you, it also happens even if the contents of the disk have already loaded. But even though the contents of the disk have showed, they all have blank white icons.I already tried sfc /scannow and they it reported no issues.
View 1 Replies
Nov 6, 2015
What is the best way to create a bootable system recovery disk for an event of a computer crash?
View 4 Replies
Oct 4, 2015
I have just upgraded to Windows 10 from windows 7 home edition, I have problem while creating system repair image disk. I have inserted a blank dvd but while the create image app is running it shows error message called Unspecified error,
View 1 Replies
Jul 6, 2015
I'm having a problem where the system is constantly at 100%. Sometimes it goes down, but it keeps going back up to 100%. This is build 10162.How to stop this from occurring? Generally, the service MsMpEng.exe or ntoskrnl.exe which is System are at the top of the list.
View 1 Replies
Aug 12, 2015
Just converted my systems to Windows 10. Working well, so far. I would like to install 4TB disks on a couple of the systems and understand that I need to use UEFI. Looks like my ASUS P8Z68-U GEN 3 MB supports UEFI, but I don't understand how to enable it. The other system has ASUS B85M-E mother board. I've seen some one paragraph descriptions, but they don't really walk me through the process.
1 - Can I upgrade my existing system without a complete Windows 10 reinstall? I have lots of apps installed so I'd like to avoid complete system rebuilds.
2 - Due to legacy use of Mirrored drives, I'm using the Intel RAID stuff, although I no longer need it. Will that be a problem? SSD and other disks are JBOD. I'd like to get rid of that, but I think that does require a complete system reinstall since disabling the RAID wipes the disk.
Looking for step by step process to convert a system to UEFI to support 4TB disks?
View 6 Replies
Feb 10, 2016
I have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10
View 9 Replies
Nov 13, 2015
I am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large?
2. Can I install a new larger drive and have it move the system files there?
View 4 Replies
Dec 10, 2015
I disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
View 9 Replies
Feb 6, 2016
My Windows 10 does not start up faster as Windows claimed it would. It is very very slow indeed. I took a screen shot of the startup usage (Task Manager) and saved it as a Jpeg.what I can safely remove from this or else how I can make them go away for a while?
View 10 Replies
Dec 15, 2015
I hope shortly to receive a "pre-owned" Dell M6800 laptop with a 128GB Solid State Disk (SSD) and a 750GB HDD.
It comes with 8.1 installed (shudder) and I will upgrade to 10 immediately as I couldn't tolerate 8 or 8.1. Once I've done that, I'll need to transfer all my applications and data (which will be tedious I know unless there's some trick or clever tool/application to do it).
Aapart from the OS what should go on the SSD, and what on the HDD. Looking at my current system, the Windows directory plus Program Files, Program Files (x86) and Program Data run awfully close to 128GB, so this isn't quite as simple as Windows & Apps on SSD, with everything else on the HDD and use junctions if necessary to point to data on the HDD.
View 7 Replies
Aug 17, 2015
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
View 3 Replies
Jan 26, 2016
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
View 4 Replies
Aug 28, 2015
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10
View 8 Replies
