Performance :: System Restarts Itself Sometime After A Shutdown?
Jan 31, 2016
I have multiple PC's running W10 v1511. For some reason at least one of them and I suspect more than one will automatically restart after it has been shutdown. The restart does not occur immediately, in fact, it is several hours before the magic happens! The reason I know it's happening is the system will be in a sleep state when I check it in the morning after I know I shut it down the night before. The PC in question is the one that I have described in my system specs. I know all about the "Wake On" settings in the in the Intel network controller. I have them all turned off (unchecked) but that only effects the system when in sleep mode? Is there some other setting that could be causing the system to refuse to stay shutdown?
View 6 Replies
Similar Messages:
Aug 16, 2015
Windows 10 kept wanting to restart after it has been shutdown. The computer would have its power indicator turned off for maybe 2 seconds, then you hear the fan whirling and the BIOS screen appears followed by the usual boot process.
I don't know how this would work, but my problem was solved by turning off in my BIOS setup 'Legacy USB Support'. Now if I shutdown Windows 10, it would really shut itself down. No problem so far after maybe 10 or so instances.
View 3 Replies
Sep 4, 2015
I have a desktop that I ran the update on from windows 7 to windows 10.
When I go to shutdown it appears to begin the shutdown process. However, after a few moments with black screens the PC shows the BIOS splash screen and begins to start windows.
If I leave the PC alone for a while, it goes to the login screen, where it attempts to sleep only to end up right back at the login.
I have tried
- Turning off fast startup - Doing this results in apple sys error on restart (I do not have iTunes installed)
- Disabling wakeup by keyboard, network devices, and mouse.
- Turning off quick start in bios
I am now wondering if a clean install is my only option, or if there is some other way of keeping windows 10... just having it work properly.
View 1 Replies
Nov 24, 2015
Over the past 2 days I have experienced 4 (2 each day) shut downs and reboots. All while the PC has been idle for sometime while I'm working on another PC in the same room. Event log screen is attached but the bug check tab has no values.
The system is on a UPS and there have been no hardware changes in several months. I'm on Build 1150, V10586.11.
Attached is the dump of the log files as well.
DELLXPS8700NEW-Tue_11_24_2015_145505_86.zip
View 1 Replies
Nov 9, 2015
A number of Windows 10 users have various shutdown-related issues. The most common issue is that their PC reboots instead of shutting down. When they click shut down in the Start menu, Windows 10 doesn't shutdown, but instead restarts. Here is what you can do to avoid this issue.
Actually, it is hard to tell what is the exact cause of such behavior, because the reason can be different from PC to PC, but in this article we will explore some solutions which can be useful if you are facing this problem of your PC rebooting instead of doing a shut down with Windows 10.
1.The first thing you have to try is a clean boot. Using a clean boot, you can find if the OS is damaged by some third party app or a bad driver. By preventing them from loading, you can exclude the influence of these two factors.
[URL]
View 1 Replies
Dec 22, 2015
Been getting lots of BSODs and system hanging and restarts. Attached are my files....
View 5 Replies
Aug 8, 2015
Upgraded to W10x64. All is well and working BUT when I put the system to sleep it restarts after a short time.
View 4 Replies
Jan 3, 2016
Recently my PC has been restarting after around an hour, when playing any graphically intensive games.-It has never crashed when just using the internet, idle etc. Only when playing games has it happened.-I have tested the RAM, CPU, GPU using benchmarking and HDD is an SSD.-I have tried a clean install of Windows 10.-My OS and drivers are up to date.-I also monitored my temps when in game and they are running normal when the crash happens.The system will hang for a few seconds and my headphones give off a loud buzzing. The PC will then restart after a few seconds but none of the fan or component lights go off like it is losing power.
View 1 Replies
Oct 26, 2015
It's not a malware , it's not a heat problem . I checked them both and formatted my computer 4 times already, I am pretty tired . The last options remain is a windows 10 problem /hardware is not connected well? . My windows 10 is not a legal copy .
My computer suddenly completely restarts suddenly, even when IDLE .No warning involved , goes straight to black screen .
System error :
Error: (10/26/2015 05:54:40 PM) (Source: EventLog) (EventID: 6008) (User: )
View 8 Replies
Oct 17, 2015
2009/2010 Acer Aspire 5738DZG
Intel Pentium T4400
ATI Mobility Radeon HD 4570
15.6" screen
Windows 10 x64
When the laptop is turned on, a BSOD appears with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.
It automatically restarts after around 5 seconds. F8 does nothing.
I have booted with a Windows 10 USB flash drive and it shows Preparing automatic repair before showing the BSOD again.
View 1 Replies
Aug 4, 2015
I have tried to upgrade from win7 to win10 after copying the files and the system restarts, I will get the error 0xc000000f. I have both win7 and win10 disks and the automatic repair would not work.
Apparently this has to to with some bios settings, I have tried to follow the guide but I do not have all the options to described in the guide below.
[Solved] Error Code 0xc000000f Windows 8: A Required device isn’t connected or can’t be accessed
Specs:
Processor (CPU)Intel Core i7 Quad Core Mobile Processor i7-3630QM (2.40GHz) 6MB
Memory (RAM)8GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (2 x 4GB)
Graphics CardNVIDIA GeForce GTX 660M - 2.0GB DDR5 Video RAM - DirectX 11
2nd Graphics CardNONE
Memory - Hard Disk120GB KINGSTON V300 SSD, SATA 6 Gb (450MB/R, 450MB/W)
2nd Hard Disk1TB WD SCORPIO BLUE WD10JPVT, SATA 3 Gb/s, 8MB CACHE (5400 rpm)
View 9 Replies
Nov 20, 2015
I installed a fresh copy of Windows 10 on my laptop (Dell 7720). While running Fallout 4, I encountered sudden power-off for my system.
The power button did not turn back on for a couple of minutes and the bottom of the laptop was quite hot.
How can I ensure that this unexpected shutdown was due to Laptop overheating and no other reasons (such as Driver conflicts or bad drivers) ?
PS:- In the event viewer in the System tab , I noticed 3 major events , 1 critical, 1 Error and 1 warning. Attaching these 3 FYR.
View 4 Replies
Dec 1, 2015
Just Yesterday upgraded from 8.1 to 10 with out any problems. But, Unless fast start up is disabled, windows will start by itself a few minutes later after I shutdown. Did not have this problem before with 8.1.
Always had fast startup selected, matter of fact, never had to worry about it, had no problems when shutting down, it stayed off until I turned it on. Now since upgraded to 10, the only solution so far to stop the computer from starting up by itself after shutdown, is to disable fast start.
View 1 Replies
Dec 9, 2015
I am on 64 bit Windows 10 Pro 10586.29. Before the last 2 updates, my system, with a 512GB SSD would shut down in 4 to 5 seconds. Since the last 2 updates, it has gone from a very fast 5 seconds to about 15 to 20 seconds.
View 7 Replies
Jan 11, 2016
What would cause a windows 10 OS to hang at the Shutdown screen? It just keeps spinning. My on off button won't shut the PC off. This just happened last night. I first did the Start Menut>Power>Shutdown. It took me to the Blue shutdown page and just hung there. It did not completely shut down. I tried the on/off button. That didn't work so I had to shut off the power strip to shut it off.
View 4 Replies
May 9, 2015
Ever since I put the Windows 10 Preview on my PC, it wakes up by itself in the evening about once every other day. Seems most times there is an update to download, but not everytime. And the system is waking up from a full shutdown, not sleep mode. I have several PC's on my network and this one is the only one doing this.
View 1 Replies
Nov 22, 2015
Win 10 Home.Upon 'restart', system freezes part way through shutdown.If I use the "Slide" feature it will shut down ok.Have already tried sfc/scannow; found corrupt files but was unable to fix. Files don't appear to be critical.
View 5 Replies
Nov 30, 2015
Device is up to date, however from either the Start menu or Command prompt Windows freezes at manufacturer splash screen on restart, requiring hard shutdown, This returns even after clean install of Windows 10....
View 2 Replies
Aug 6, 2015
Since upgrading to w10 from 8.1, automatic shutdown from task scheduler won't work. After googling i can't find a solution.
It is saying "one or more of the specified arguments are invalid" which is strange as it worked in 8.1, all i have in the argument box is /s.
View 4 Replies
Oct 15, 2015
When I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
View 7 Replies
Dec 19, 2015
I found out that the hard disk is 100% utilized. In Task Manager, the process that utilizes the disk the most is ESET Service. If I open Resource Monitor there are many instances of the System process that are reading the disk, not writing it. I have two partitions on my disk - one for the system and the other one for data; the extensive disk reading is done for Pictures (I assigned a folder with pictures, about 140 GB in size, to the system My Pictures folder) on the data partition.
I am not running any tests in the ESET Endpoint Antivirus software and it seems to me that the high disk activity starts when I do not do anything and just e.g. browse Internet or look at something. So, it feels like Windows is doing something, but what it is and how I can influence it. If it were disk optimizations I think I should see also disk writes, not only reads. Could it be that Windows is doing something automatic with Pictures, Documents, etc.?
I wonder what is going on - I dislike the fact that something is going on with the hard disk, making is 100% utilized and making other work very slow and non-responsive.
View 1 Replies
Sep 26, 2015
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
View 1 Replies
Feb 10, 2016
I recently installed an SSD and I found out while running Samsung's OS Optimization disk that it has turned off System Restore by default. I of course can turn it back on, but I wanted to get feedback on turning on System Restore on an solid state drive.
View 7 Replies
Nov 20, 2015
How can I check that my system image will work in the case of a crash, Windows 10.
View 3 Replies
Aug 20, 2015
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
View 9 Replies
Nov 5, 2015
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
View 1 Replies
