Performance :: Turn On / Off Features Blank
Feb 10, 2016
Device is a windows 10 surface tablet (LTSB), that was working fine on a domain. Linked to a WSUS and has sccm installed.
I went into windows turn windows features on and off and enabled asp.net 4.5 or was it 4.6 and rebooted, now powershell does not work, certain application that require .net do not load. It complaining that .net is not installed and when I try installing .net 3.5 and even 4.6 ... It says its already installed but turned off in windows features.
Its happened twice now, the first time was when trying to install visual studio community. I got the tablet wiped/reimaged and put back on the corporate network. And Its happened again.
Can't even load gpedit, well it loads but then complains about mmc snap in when going into configuration....
I've done all the dism, sfc/scannow stuff. It came up with corruption but that's all repaired now...
View 1 Replies
Similar Messages:
Aug 14, 2015
-Fresh windows 10 install.
View 2 Replies
Aug 30, 2015
I recently did a Windows 10 clean install on two laptops, afterward I installed Intel RST on both of them using the executable (not F6 method). In Intel RST under performance features the only feature listed is Link Power Management; Dynamic Storage Accelerator and Smart Response Technology are both missing.The one laptop only has a HDD. The other has a SSD and a HDD in the CD drive bay.How can I get Dynamic Storage Accelerator and Smart Response Technology to show up? If Link Power Management is the only thing available is there any benefit to having Intel RST installed?
View 3 Replies
Sep 24, 2015
So I usually have 6 tabs open that auto-refresh by itself. After a period of time, (maybe about 30 minutes), I come back to check that 5 out of the 6 tabs turned into a blank screen but is still loading/auto-refreshing. The tab that I stayed on did not go blank, but others did. I disabled "Use hardware acceleration when available" and cleared cache. Are there any other solutions? I'm using Windows 10 and Chrome is up to date ...
View 1 Replies
Oct 14, 2015
Any way to turn off: "Check for solutions to problem reports"?
I would like to stop receiving notifications. In Control Panel/Security and Maintenance this feature is listed under "Maintenance" with no option to disable. On the left side there is a link for:
"Change Security and Maintenance Settings", but there is no option there either to turn this off.
View 1 Replies
Jan 28, 2016
I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:
Click Windows_Start_button > Power > Shutdown
The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.
I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.
View 4 Replies
Jul 30, 2015
I have been using Outlook for IOS for a few months now. It is by far the best Mobile/Desktop Email Client I have ever used. The Mail app in Windows 10 look very similar but is really lacking the features. Do they intend to bring the apps closer together in functionality? It would be a productivity powerhouse with the addition of the mobile features.
View 4 Replies
Feb 10, 2016
Love Windows 10 so far, has exceeded my expectations. Apart from one annoying thing: the language typing features notification. I turned off windows tips in settings a while back and the notification stopped. But now it's back! How to get rid of it once and for all?
View 3 Replies
Aug 8, 2015
On my Windows 10 installation (Home, 64-bit), I have disabled "Show app notifications" AND "Show me tips about Windows".
However, every now and then a message pops up (from the "Action Centre" just next to the clock) stating "Language typing feature - Install typing features for your language".
I do not want to install any language features, how can I disable this?
View 2 Replies
Jul 31, 2015
Am having trouble installing optional features from Settings -> System -> Apps & Features -> Manage Optional Features? If I select any feature to install (such as English(GB) Handwriting) all that happens is the view refreshes and the feature isn't installed. Additionally, I constantly get notifications throughout the day that "Windows is adding features" and then immediately a notification that "Something happened and we couldn't install features"...
View 5 Replies
Jul 26, 2015
(Build 10240) Attempting to uninstalling anything from Programs & Features causes it to crash to desktop without giving me the uninstall utility.
View 6 Replies
Aug 24, 2015
I am having trouble installing optional features from Settings -> System -> Apps & Features -> Manage Optional Features? If I select any feature to install whether it is .NET Framework 3.5 or a language pack, all that happens is the view refreshes and the feature isn't installed.
Additionally, I constantly get notifications throughout the day that "Windows is adding features" and then immediately a notification that "Something happened and we couldn't install features". These notifications emanate from the language pack trying to install additional features namely Basic Typing, Handwriting and Speech. The language is the default English US. I tried changing it, to no avail, the problem persists.
I upgraded from Windows 8.1 to 10, and then did a clean install of Windows 10. I'm on a cellular connection, and the option to mark the connection as non-metered is grey'd out, so I cannot change it - but my Windows Update seem to be working just fine.
View 3 Replies
Oct 11, 2015
I upgraded from Windows 8 to Windows 10 on my Toshiba Laptop (Satellite C55t Series - Touchscreen) and had to revert to former as I did not like the windows screen. The Title Bar, Toolbar and others did not have the usual color features.In other words, From Title Bar to Taskbar were all white/gray (or whatever it is). Having been so used to the features of Window 98 to Windows 8, I found it uncomfortable to use it.
View 5 Replies
Aug 20, 2015
I see a long list of my windows 7 apps. Some have a size and date and other have the date and the words "unavailable".
What does this mean and if it means I can't run the app, what can I do about it? Do I have to find a Win 10 compatible version?
View 3 Replies
Nov 9, 2015
My settings app keeps freezing, but only when I select System > Apps & features and System > Storage, at least as far as I am aware of.
I am running build 10586, but already had this problem in build 10571, the first one I had as an Insider for PC.
View 1 Replies
Jan 21, 2015
Does the new Maps app being built for the phone and PC features voice turn-by-turn navigation? I know the current Maps app does not. You need to use Here Drive or another third party app for voice navigation.
View 1 Replies
Nov 27, 2015
I am having problems with me Mouse and key board, on boot up they will turn on for about 20 seconds then turn off. Then a error comes up,inaccessible_ boot_drive. But if I restart my pc the mouse and keyboard will do the same thing but instead of the error I get, choose keyboard layout, and a list of options but I cant choose them because the mouse isn't working. This all started happening after I upgraded my power supple but I when I put my old power supple in I had the same problem. I have windows 10and I have tried using different keyboards and different usb ports.
View 1 Replies
Aug 6, 2015
The dopey thing defaults to sort by file size so you can't find anything! how to set the default to sort by name?
View 2 Replies
Aug 18, 2015
Up until today's updates Right Click when using Edge had very limited functionality however much to my surprise Right Click options now include Copy, Paste, Copy Link, Copy Picture and Save Picture. Still MIA is Create Shortcut but I won't hold my breath.
View 9 Replies
Sep 17, 2015
I installed an application "Clone File Checker" and uninstalled that using "iObit Uninstaller" with Power Unistall" option. After that, i am not able to open Control Panel, Programs & Features, Power Options and System from the Start Menu. Clicking on each of these gives an error in the enclosed screenshots, but all of them display the error message "This file does not have an program associated with it to perform this action. Please install a program, or if one is already installed, create an association in the Defaults Program Control Panel". Only the file names are different. When I try to set the Default Applications, I do get a similar error message.
Moreover, clicking on the File Explorer from the Start Menu opens the Explorer screen, but when I pin to the Taskbar and subsequently attempt to open tit from Task Bar, I get an error message.
View 2 Replies
Sep 8, 2015
Some (3, out of maybe 20) of my installed Programs, all working perfectly well, are not listed in Control Panel -> Programs and Features.
View 2 Replies
Aug 19, 2015
I first upgraded my laptop, in order to test Windows 10 before installing on my desktop. The laptop worked fine, my apps and peripherals still worked, so I went ahead and upgraded my desktop too. Realized that my user profile was corrupted, which resulted in me not being able to access settings, search, start menu, etc.
I've managed to mostly rebuild my original profile, the start button is working and I can search, but none of the "modern" apps show up anywhere - including the Store. On my laptop all this showed up automatically, and seems to be working fine. Search, Task View and Edge are present, but my start menu is a little, er, naked compared to what I'm seeing on my laptop. Do I need to manually download and install Store and get the other apps from there?
View 3 Replies
Oct 19, 2015
Cannot access any settings all windows that open are blank screen shot attached
View 5 Replies
Sep 18, 2015
I upgraded to Windows 10 a couple of days. The system was up and running that day and the next (yesterday 17 September). Today, the screen is blank and the mouse pointer comes up but no login box.
View 7 Replies
Jan 2, 2016
for some reason all my Icons for everything but folders have gone blank I can't seem to get them back. As well as all my file and program associations have eather reset and ask me what programs I want to use a default and when I reassign them the next time I go to open a file of the same type the association seems to dissapear again and ask what progam I want to use again... This seemed to happen after Windows 10 auto updated last...
See pic below of my desktop (note the Virtual DJ icon I just istalled that not 10 mins ago and it is blank as well) and windows explorer with blank 'page' icons but if I use the Open file dialouge page in Firefox or Chrome the icons show up....
View 3 Replies
Dec 13, 2015
When I switch on my laptop, appears to start up, brand name appears, then screen goes blank.
Stays that way, nothing else happens.
Screen is not black, a sort of faded blue.
View 1 Replies
