My computer will go to sleep after 30 minutes, as scheduled, but only if I have not signed in to my user account. Once I sign in, it will not automatically sleep, and the monitor will not dim.
What processes are likely to be interfering with sleep? I can put it into sleep manually, and it will stay asleep. but it won't do so automatically, if I am signed in.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
How do I prevent my computer from going into a deep sleep after inactivity?
I have hybrid sleep off. Whenever I try to wake it up, it doesn't respond to any of keys except for the power button. That leads me to thinking it's been shut down, crashed, or is in a deep sleep. I don't think it has crashed.
Do I need to disable hibernation? If so, how do I turn it off permanently?
For some reason starting about a week ago certain processes occasionally become suspended on my laptop. I'm running Windows 10x64 Pro on a Sager laptop with 16 GB of RAM and then i7 processor. The processor becomes suspended varies but IE 11 is one of the ones that become suspended and when it does obviously cause all kinds of problems. I'm attaching a screen capture showing 4 processes that were just suspended when I checked. How this is happening and how to prevent it?
View 2 Repliesi am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 RepliesWindows 10 is simply not able to enter sleep mode. Whenever I try, the monitor shuts off, but the computer power does not. When I move the mouse, the log-in screen appears (as it would when your computer comes out of sleep).I looked at Windows Event Viewer, and this is what I found for my attempt to sleep just a moment ago (Event 10016, DistributedCOM):"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB70 2511 C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
I went to these IDs in regedit, and attempted to change their security permissions. I received an error message saying "Unable to save permission changes on {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}" (or the CLSID).Looking at the above CLSID registry entry more closely, I find that it corresponds to a program called RunTimeBroker.exe. The official Windows website has instructions on how to change the permissions for this program, namely, by opening Component services, going to RunTimeBroker, opening its Properties, and adjusting its Access Permissions in the Security tab.
I have a custom built PC. Ever since then I haven't been able to go into sleep mode. As soon as I click Sleep the system powers down for few seconds then powers straight back on to show me login screen.
What I've tried so far is doing a reset with Windows 10 Pro to wipe everything but keeps files on SSD which is my primary. I disconnected my HDD which is for gaming and music so that it wont get touched. As I'm typing this the issue hasn't been fixed. The only thing that I did was some updates for OS, and that's it! I'm completely puzzled by what is happening.
my computer is not going in sleep mode even my settings are in sleep mode.
View 1 RepliesWhen entering Sleep Mode the computer is turned off.
Performance indicates that Sleep Mode is set for 30 minutes which I have not used, but when I leave my computer and manually select Sleep Mode is when the computer is turned off.
I checked the network adapter for the "allow this device to wake the computer" and all were unchecked
How do I get Sleep Mode to go to sleep with a manual setting?
We updated from 8.1 to Windows 10 and now the computer will not go automatically into sleep mode.
View 2 RepliesMy computer will not go to sleep at all unless it is in safe mode without networking (the monitor does sleep then). When I boot it into safe mode with networking, it will not go to sleep (the monitor will not sleep). When I boot normally into Windows 10 (clean install; up-to-date as of today with Windows Update), the computer does not sleep.
Also, sometimes before when I login after a normal startup, the computer does go to sleep; however, nothing displays on the monitor after I press the power button to bring it out of sleep. I tried disabling the "wake" feature for the network adapter (as suggested in another thread), but that did not work at all. My computer's specifications are:
Operating System Windows 10 Home 64-bit
CPU Intel Core i7 2600K @ 3.40GHz Sandy Bridge 32nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard Gigabyte Technology Co., Ltd. H67M-D2-B3 (Socket 1155)
Graphics ASUS VS239 (1920x1080@60Hz) / 2047MB NVIDIA GeForce GTX 660 (PNY)
Storage 465GB Seagate ST3500418AS ATA Device (SATA) / 298GB Western Digital WD My Passport 0748 USB Device (USB (SATA))
Optical Drives ATAPI iHAS424 Y ATA Device / HL-DT-ST BD-RE UH12LS28 ATA Device
Audio NVIDIA High Definition Audio
When I click on the Power app and choose Sleep, my computer always wakes up halfway through the night. I tried customizing the power settings but no luck.
View 1 RepliesMy computer goes into sleep mode after a minute or so despite the settings I have used for same.
View 1 Repliesi have custom built computer more than able of handling just about any game with a
SAPPHIRE Radeon R9 290 100362-3L 4GB video card
Rosewill RX850-S-B - Xtreme Series 850-Watt power supply
G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 ram
MSI 970A-G43 motherboard
Seagate Barracuda ST1000DM003 1TB 7200 RPM hard drive
and a amd fx6500 3.5ghz cpu
along with 5 case fans and a fan controller to keep it cool. now onto my problem when ever i do anything demanding like play a game it will run fine (with varying time but typically at least a hr) then at some point with no warning it will go into for a lack of a better term (not really sure what to call it) partial sleep mode. the led on the front of the tower will flash as if in sleep mode yet i can still hear everything else working (the hard drive fans everything) but i will lose picture.
The only way to get it out of this partial sleep mode is by completely unplugging (i have tried hitting the power button which typically wakes it up from regular sleep, hitting the reset button moving the mouse everything one would typical do to wake it up from a regular sleep mode and it does not work the power supply needs to be turn off and then turn back on). Thinking that something was getting to hot i run a whole bunch of monitoring software (cpuid and rainmeter) the cpuid i run on a second screen so i can constantly monitor temps and nothing seems to be running to hot the hottest i have seen my cpu and gpu get is like 65c.
I have tried to replicate it by ruing a cpu and gpu stress tester (separate hoping that if one cause it then i know where the problem and together) with no luck of replacting even after running them for like 12hrs straight. Just a few more thing no i am not overclocking i have 5 case fans 1 pulling in through the front 1 blowing out through the back and my cpu fan run by the mother board and 1 on the bottom pulling up and 2 on the top blowing out run by a fan controller which i set to manual and set all the fans to 100%. my cpu is about 2 years old and all the other parts are less than a year old. and i have Kaspersky antivirus which i ran multiple time with nothing found. it did it both when i had windows seven and when i upgraded to windows 10.
My computer (an Asus Republic of Gamers) shuts down when in sleep mode. More precisely, I put it in sleep mode (in 1-2 seconds), but when I open the lid or press a key on the keyboard to wake it up, it starts from scratch, as if I had shut it down.
I tried deactivating Intel Management Engine Interface in the Device Manager as I saw it could be a reason for my problem, but it doesn't solve it. I reinstalled Windows from scratch (from a USB key) and the problem is still there.
I only have the computer for less than a month and I think it worked fine at the beginning.
My computer won't go into sleep mode automatically. Even when I manually set it to sleep, it will be awake again within 10 minutes or so. I've gone into the advanced power options to make sure that nothing is interrupting it while sleeping and set it so nothing could wake it up. I've checked in the device manager to make sure none of my devices are waking it up.
After it wakes up I'll go into the command prompt and use the "powercfg -lastwake" to see what could be causing it and nothing shows up. There are even times when the computer will turn itself on from being completely turned off.
I have a custom PC I built myself. The computer runs flawlessly while playing games or using my computer in any way. I'm having a problem though that I cant find anywhere. When my computer goes into sleep mode by its self and I come back to it later it will just be on a pale blueish screen and occasionally a pale orangy screen and it wont let me do anything. The only thing I can do is hit the reset or power button, and once its back on everything works great until it sleeps again on its own. I don't even know if its a hardware or software problem.
View 1 RepliesI updated to W10 and have had no problems and this one really isn't a big deal but it's got my OCD going. I have sleep set after 25 minutes and that seems to work fine. It comes out of sleep pretty well too. But, it seems that ovenight, the system shuts down on it's own.
I've looked at the logs and scheduler and it seems that the UpdateOrchestrator was set at 3:30 am so I changed that time to 6:30 PM and the system turned off overnight again.
So, I left it awake one night and it did not shut off. Tried again the next night and it turned off. I'm going to try to remove the schedule entirely but from what I've read over the last few weeks, it will create a new task again.
What UpdateOrchestrator really does despite all my googling and don't have this problem on any other PC so I'm wondering if it has to do with hardware. WhoCrashed does not report any crashes at all. Nor do the logs tell me anything.
In W10 when I leave my laptop in sleep mode overnight, it uses about 10% of battery life. In windows 7 it was way less, to the point that it wasn't even noticeable.
where I should start looking?
I have a Thinkpad X220T
I have clean installed windows 10 on my Zenbook (UX31LA) and i have problem with the sleep mode, when i enter sleep mode (either way) my screen turns off and the power led blinks (normal so far), but when i wake the computer up, I see the "Asus" logo and it loads the sign in screen and all my work is gone. it looks like it stats from scratch and it takes about 8 sec (like stat from power off).
View 3 RepliesI upgraded to Windows 10 and now I cannot wake up my computer from sleep mode. With Windows 7 and 8.1 all I had to do was tap any key and the computer would wake up. Now that doesn't work. I have to press and hold down the power button to force a shut down and then restart. This problem only appeared after I installed Windows 10. How can I fix it?
View 19 RepliesThe store we went to sold us a computer they had on display. They didn't reset the computer and left their administrators on the computer. I've installed google chrome office 365 and downloaded documents but when it sleeps or when i've restarted the computer everything "saved" is gone. Will reverting back to a previous system as suggested here [URL]
View 5 RepliesI have an HP pavilion g6 notebook laptop computer. I have recently upgraded from Windows 8.1 to Windows 10. I had occasion to put my computer to sleep! I had been working on my college courses for a few hours, when I needed to take a break. I put my system to sleep, but when I returned to complete my assignments my computer would not turn on! It went to an off black screen, and locked up! When at sleep the power indicater blinked, which indicates that it was in sleep mode.
When I tried to awaken my Pavillion it locked up, and the only way to regain control was to manually force it to shut down (i.e. hooded power button down.) thinking this may be due to system clutter I cleaned both user disc & system files using the Windows disk cleaning function, found through the control panel, looked for both HP updates, and Windows updates.
Later I again tried to awaken my machine after putting it to sleep, and had a repeat in the inability to awaken it! A third and the last time I tried to awaken my PC from sleep I noticed that for some reason, and somehow the indicator light was solid, the screen black, and I heard my computers fan running!
My computer won't go into sleep mode if it's been on for a while. It will go into sleep mode if it's freshly booted. Whenever I check, powercfg -requests is clear. Currently, powercfg -requestsoverride shows process: chrome.exe display system awaymode, driver: filesystemsrvnet system. When it won't go into sleep mode, it won't even automatically turn off the monitor. My settings are set to allow sleep.
Ideally I would like a fix for this, but I would also be okay with some kind of program that puts my computer into sleep mode after 30 minutes. I used to have such a program a long time ago, but I have forgotten the name of it, and googling 'sleep timer' just shows sleep mode tutorials. Googling 'powercfg requests is clear but computer won't go into sleep mode' hasn't been particularly useful, either.
It looks like my computer was logged on by someone during that time of audible beeps. I have only had Win10 a few days. I am using a hard wired modem. Event id 4624. It shows login, but it was NOT me. I had the power cord removed when it was logged on, but not my ethernet cord. I need to remove the ethernet cord every night too? I am using Win10 firewall.
View 2 RepliesMy PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
View 1 Replies