The PC has 2GB RAM, when I saw the Task Manager, it doesnt have many services as my laptop has, it doesnt have like Service Local Host etc. It's memory is only 36% but my laptop, has Service Local Host etc and many services has 60% (Note: The PC has only one system service and the rest are apps.
View 1 Replies
It seems Microsoft has eliminated a feature I once used prolifically: Hardware Profiles. Windows-10 does have a "hardware profile", but it is nothing like what was in XP (or in Win-7, as I understand it). I want to know if there is an alternative in Windows-10 that allows me to control which Services are enabled or disabled from one session to the next, based on the currently selected profile (XP also had User Profile, but that's a different beast, and that still seems to exist in Win-10).
In the older O/S'es (XP, 2ooo, and NT for sure), you could set up multiple "hardware profiles" (silly name because it related as much to controlling Services as it did to controlling Devices). You give each profile a name, and set which one is the default startup if you let the screen time out. This is like the timeout in a multi-boot menu, and it's a menu that comes up right after the O/S menu if you are multi-booted. If you're single boot, it comes up at that same moment in the boot process.
Then, in the properties dialog for an individual Service, in the Logon tab (if I recall correctly, or maybe it was a "Startup" tab), those profile names you made will show up as a list allowing you to set enable at bootup or disable at bootup for each profile in that list.
I have an aging laptop that I put an SSD into in an attempt to make it more useable. It is an older Compaq Presario with 2GB ram, and I am running Windows 10, 32 bit. When I go to the hard drive properties and click on the "tools" tab, and then click on the "optimize" button, under the "current status" column it gives "Optimization not available". I have read similar threads in this forum and online, but none seem to exactly apply to my situation, so I have not been able to fix this. I do not know if the TRIM function is not available because my system is old, or if there is something else going on that may be modified to make it work.
I also have another old laptop that is just slightly newer than this one, also with Windows 10 32 bit, and the same model SSD works in that system without this error message. If there is nothing I can do about it, then I will have to live with it. But if there is some workaround to get the optimization working, then I would like to fix it. I have run the administrator command fsutil behavior query DisableDeleteNotify and it comes back with a result of "0". what the bottom line impact is if I cannot get the trim optimization working? How big of a hit is it to performance? Is it something I can do on a regular basis with a utility instead?
My laptop's CPU usage hit 100% and stayed there, and the fan came on even though the CPU and HD temps were normal (CPU 44-47C, HD: 39-42C). Any thoughts on what happened? Restarting seems to have fixed it, at least temporarily. I'm doing a virus scan, and I'm going to start going through the logs, but which of the vast number of logs I should start with.
NOD32 and MalwareBytes both say no threats, malware, etc.
I am working on a .reg file to disable all the unwanted services. I do not know the keys to use for the following services and would like adding them to my .reg located below.
Security AccountsSystem Event NotificationWindows FirewallWindows Eventlog
And can you look over my current list and see if there is anything that 100% must not be turned off? Is there anything else you would add?
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSchedule]
"Start"=dword:00000004
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesALG]
; Application Layer Gateway Service
"Start"=dword:00000004
[Code]
I just reinstalled Windows 10 (clean). Now I see that I can't turn on Location Services, so I can't use cortana!
If I click on "change" (turn on) in the settings menu, nothing happens.
If I try to open cortana settings, nothing happens as well.
Which running services are ok to disable for improving the performance (or to reduce the RAM memory consumption)?
View 3 RepliesMy laptop keeps freezing and nothing responds. I start task manager and nothing is running it reports! I can't even power off except fordoing ctrl alt delete and restart it. It's becoming an everyday occurrence. I am thinking in going back to windows 7. I wish Microsoft would have used 7 as a model to make another OS. In my opinion 7 is the best OS that Windows has made since XP. Is there anything I can do before I do a full reinstall? Can I use an Acronis image of my old c drive on my old laptop? I think it's a definite no, but I won't know until I ask.
View 9 RepliesThis problem has just started and it is preventing me from getting Windows Updates and accessing my external hard drives.
View 1 RepliesIs there an easy way to disable and re-enable groups of services / processes in Windows 10 so that the computer can be switched between optimization 'profiles' for, say, routine office work, audio/video editing, and gaming?
I have two computers now - one for routine office work (e.g., Office suite, Quickbooks) and a dedicated audio/video editing workstation. The latter is very powerful and I'd like to use it for both jobs, but not if all those background processes (59 total), like Cortana, OneDrive, iCloud mean sacrificing resources for critical A/V work. Neither do I have the time or patience to manually disable scores of Startup apps and services each time I throw my A/V hat on.
So I was messing with the services startup parameters and I managed to change something which is now preventing my USB ports from working. My kb/mouse lights up during boot and then goes off and stays off just before the login screen appears. How I could fix this without reinstalling windows again? I've tried all ports but none of them work .
View 1 RepliesIn Edge Home page or the News app?
View 4 RepliesMy win10 installation got stuck at 91% so I had to restart and disable my antivirus and other services, but when I start MediaCreationToolx64 it starts to download the 3gb again from the beginning. Is there an installer somewhere in the downloaded files that can let me skip this or do I have to download it again?
View 1 RepliesAs we all know, the classical Windows XP has a tool.... XpLitePro ... to remove all unwanted software and services you wish to have deleted. XpLite could both remove hidden programs/services which are not visible in configuration screen/ remove programs section
Question: Does Windows 10 have such a tool already? I can't hardly wait to remove unwanted stuff..
I'm not sure what all is affected by "Windows services" not connecting but since that happened, I am unable to access my Outlook email and a solitaire game won't open. I'm also trying to update Windows Defender but it won't finish updating. And, I have checked to see if an update is due and it just never stops looking for one. Little blue dots, little blue dots, little blue dots...
I have not downloaded anything from anywhere.
I never had any problems with Vista or 8.1. I'm almost ready to go back to 8.1.
OK here's my scenario, I have successfully used Macrium Reflect to create images saved on a 1TB external drive. I had 2 good images stored on it and tried to put 3rd image on the same drive. Please note that I have used one of save images to restore the system after replacing the failing hard drive. The create image process runs to what I think to be the very end then comes up with msg: "an error has occurred, Please see the history log for more details"
I could not find this history log, but figured maybe there was not enough space on the 1TB drive to completely write the image file. On my next attempt to create the image, I used a brand new 3TB external drive and it fails the same way. I have attached a photo of the error, where the history file is? I have left laptop up and running after clicking ok, did not want to risk losing the history file by booting back up. BTW, on the 3TB external drive it did create a temp file named xxxxxx.mrimg.temp with size of 0 kb.
Is it enough to make image from windows location (c: ) Or is necessary to make image from 100 mb windows hidden drive in addition? I want to create an image from my laptop to recover windows when it's corrupt.
View 4 RepliesI have win 10 pro x64 1511, the problem is that i want to disable defender but in services all the options aren't available like in this image:
I don't know that happen, is like I'm running without admin privilege or something but I'm the only user in my laptop so that can't be possible.
I figured out on the pro version but the home version doesn't have GPedit.msc. I disabled Defender but I still see antimalware services executable running in Processes.
View 2 RepliesWhen I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
Got a nice light small laptop(screen 14 inch - enough for travelling) which has a native resolution of 1080 X 1920 --much better than the usual 768 X 1366 - especially when viewing movies etc. The display is really a significant improvement over the bog standard 768 X 1366 and really noticeable also when typing word documents or reading text.
(For traveling etc the 14 inch size is far more convenient than the more usual 16 - 17 inch sizes).
However the windows standard texts are tiny (boxes, drop down menus etc etc). -- I fixed most of it by adjusting text size settings and display to 150% -- the start menu items still have too small text.
If I increase the display resolution to 175% things like file explorer fail to start when clicked and the screen refreshes periodically - so set back to 150%.
Any way to increase text size on the Start menu.
Funnily enough when you use the WIN+X key / right mouse click on start button the text sizes in that list are fine --it's just the standard start menu when you click the windows start button.
Running Windows 10 pro X-64 -- graphics driver Intel HD 520 latest version. W10 latest updates applied.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
View 3 Replieshard disk of a laptop with windows 10 used as external USB drive to another laptop and it workded but there are some problems that display is poor and shows windows is not activated but in my previous samsung laptop it was activated when i downloaded it freely from Microsoft. Other things are going smoothly till now.
View 1 RepliesI have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
I've notice that on windows 10 and 8.1, task manager would show the my max cpu core speed is 2.3-2.4 ghz. However, my Core 2 Quad q8400 is rated at 2.66 ghz. I tried changing the power settings in windows and try lowering my cpu temperature, but my speed would never reach 2.66 ghz.
View 7 RepliesMy PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
