Performance :: Monitor Sleeps After 10 Minutes

Jan 9, 2016

so i upgraded to windows 10 from windows 7 the other day (clean install) and my monitors go to sleep after 10 minutes of inactivity i have my screen and computer set to never sleep everything is set to never no screensaver i have set system unattended sleep to never (ive set it to +&- ten minutes and doesnt do a thing) i am at me wits end ive edited registry keys to no avail..should i just go back to my windows 7 partition.

View 2 Replies


Similar Messages:


Performance :: Monitor Turns Off After 2 Minutes Of Inactivity?

Aug 20, 2015

I recently updated from Window 8.1 to Windows 10. The upgrade went fairly well except for my laptop monitor turning off after 1 or 2 minutes of inactivity. I have changed all power settings to appropriate times. At times, normally after a fresh restart, my screen saver kicks in correctly. However, after a few times of working correctly, my monitor begins to turn off again.

View 9 Replies

Desktop Automatically Sleeps After 2 Minutes

Apr 29, 2015

My desktop ignores the settings in Power Options and automatically goes to sleep. I have made sure that all of the advanced settings are set to Never. In the screen saver settings, it reverts back to 2 minutes after I apply the changes. Also, editing the value for ScreenSaveTimeOut found in location HKCUControl PanelDesktop from 120 to say, 3600, has no effect and reverts after refreshing. Deleting the key altogether also has no effect.

View 1 Replies

Performance :: Running Out Of Memory When Computer Sleeps

Oct 20, 2015

After installing Windows 10 a while back I began seeing a "Your computer is low on memory" error... this error only appears after the computer goes to sleep and is woken up, and never happened on Windows 7 or 8.1. Nothing has changed except for the os

The os is on 250gb ssd with 164gb of free space. I have a second ssd that I install software to (Autodesk, Adobe, etc) and it has over 150 gb of free space. There is a 1tb hd for general storage which has over 500gb of free space

When the "Your computer is low on memory" error occurs windows says it needs to shut down programs to save memory, this causes any program that's open to stop responding and crash. Also, when this happens one of my monitors typically freezes up (usually monitor 2) and the default playback device for my sounds (monitor 3) gets changed and I can't hear any audio until I restart the computer.

After a restart everything seems fine. None of this happened until I installed windows 10...

View 2 Replies

64bit Monitor Display Turns Off After 2 Minutes?

Dec 20, 2015

I have three PC's all running the same OS setup but one no matter what I try after 2 minutes the display goes blank, move the mouse and the desktop is there! I found in link but for Windows 7 with the term called "System unattended sleep timeout" added to Advanced Power Settings" but cant find anything like this in Windows 10. And I do not know even if this feature is part of Windows 10 it could be something totally different.

View 5 Replies

Performance :: PC Won't Sleep After 30 Minutes

Nov 14, 2015

I seem to be having problems where my PC wont sleep after 30mins as its set to.

View 2 Replies

Performance :: Disk Usage 100% For A Few Minutes

Feb 10, 2016

For some reason, my disk, when i open my computer and at some other point, always spikes up to 100% for a few minutes.

This happens when :

at the start, Something called System and compressed memory always make my pc go to 100% disk usage. Later on, there are all those Service Host going up to 100% and something called RzStatsManager

When i open norton or when i download something new it also goes to 100%, each time I open google chrome too and Steam make the disk go to 100% at the start and every time i open it it goes to 20% and the system memory goes to 80%...

All these times, the disk spiked at 100% for a few minutes.

I disabled all my notification, each time i open my PC i disable Windows search and superfetch but it spikes up every time. What can I do?

View 9 Replies

Performance :: Hangs After 10ish Minutes

Dec 22, 2015

I upgraded from windows 7 pro x64 to Windows 10 pro x64. Since the first time I upgraded, it's all good the first 10ish minutes, and then nothing works.If I open a new tab in Edge, that one doesn't load. If I click a link on an existing page, it doesn't load.

The windows menu shows up when I click it, but I cannot search anything in it.If I start a new application, it doesn't start it.Win-R does show the command runner, but anything ran there doesn't start (even cmd or notepad) (no matter which app, explorer, notepad, etc...).

Restart/Hibernate/Shutdown doesn't do anything.I have to force reset (hardware button) to be able to use the computer another 10ish minutes before it becomes unusable again.

I tried removing many services/apps at start-up, didn't work. Malwarebytes and panda antivirus didn't find anything wrong. Repair start-up / system didn't work. So I performed a clean install of Windows 10 (still pro x64).

View 6 Replies

Performance :: Automatic Disk Defrag Every 5 Minutes When Idle?

Feb 1, 2016

Every time i leave my computer idle for 5 minutes, disk defragmenting starts acting up. It never did this on Windows 7, and its very annoying. This causes my fan to speed up and it stays that way until i give it some input.

I always put my computer to sleep when I'm done using it, and would rather defragment manually. I want to turn this 5 minute defragging off, but how?

normal use

after 5 minutes of no user input

View 5 Replies

Performance :: 6 Minutes To Restart - Screen Is Black With A Small Blinking Light

Jan 21, 2016

For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.

View 7 Replies

Performance :: Resume From Monitor Power Off

Oct 22, 2015

So i just upgraded from Windows 7 to Win10 a week ago and everything went smooth as silk. I will said this is the first time i can remember doing an in place upgrade, I always format and do a clean install about once a year but ive been busy so i took the lazy route.

Issue is i have my power settings set to None and my power options set to turn the monitors off after 10 minutes. I have it set to Never sleep. After the 10 minutes passes the monitors power off as expected but when i move the mouse or hit keys on my keyboard it takes at least 10-15 seconds to initiate the monitor power on. This was 1-2 seconds in Windows 7. Its pretty minor but its irritating as hell.

View 2 Replies

Performance :: Create Desktop Shortcut For Reliability Monitor

Nov 17, 2015

How to create a shortcut to the Reliability Monitor?

View 2 Replies

Performance :: Reliability Monitor Shows Constant Windows Crashes?

Aug 22, 2015

Since upgrading to Win 10, I have noticed that with most (but not all) system shutdowns and restarts, it result in a nice red X with the 'Windows was not properly shut down" Clicking on it gives no clues, just says "The previous shutdown at [time] on [date] was unexpected.

There is no other indication other than what the Reliability Monitor reports. I would not even be aware there was an issue. The PC starts as normal with no errors on every boot.

View 3 Replies

Computer Sleeps When Remove Headset

Nov 23, 2015

My computer goes to sleep when I unplug my headphones-not always, but often. This does not happen for other devices such as my mouse or earphones.

View 1 Replies

Windows Sleeps Only Once After Startup Then Can't Sleep

Aug 11, 2015

I had installed Windows 10 for over a week now. The issue of windows not sleeping after sleeping once after startup from a shutdown has been going on for a couple of days.

I've been through many of the power options that deal with what devices wake up the computer, and I have turned them all off at one point which did not work, Windows 10 still refused to sleep properly after sleeping once.

I've went to power options and made sure that the sleep button makes the computer sleep, but it still refuses to sleep after it slept once. I'm really unsure where to solve this, and I don't think this issue has been addressed with Windows 10 yet. Perhaps this is a bug?

View 1 Replies

New Mini PC Will Not Wake Up After Longer Sleeps

Oct 8, 2015

I've bought a completely new ASUS VivoPC that comes with these specifications: [URL]....

My problem with this computer is that it will not always wake up from sleep mode, especially during longer sleeps over the night. Normally I press a button and it turns on immediately, but sometimes my keyboard and mouse refuse to respond and my computer sleep indefinitely until I press the power button behind the PC. I know that the computer is still sleeping because the strip of light in front of the computer starts blinking every time I put it to sleep, and there is no change in its behavior when it won't startup normally. After booting it up it puts me right where I was before putting it to sleep like nothing happened.

I have updated windows 10, BIOS and all my drivers except for the newest GeForce drivers because version 355 and 358 gives me a BSOD (Driver Power State Failure) that loops on startup indefinitely. The only way to fix it is to revert back to 353 through safe mode or use system restore point. I have already written an extensive post about it here for more details: [URL]....

I have also tried formatting my PC several times, but the problem still persists even on a brand new install. The PC is only two weeks old so I should still have my warranty in check. Despite the two problems I really like the PC. I have other VivoPC's that works perfectly, but they do not have both intel and NVIDIA graphic drivers. So I have been suspecting that these cards conflict somehow.

View 1 Replies

Computer Sleeps / Wakes Fine Manually But Won't Wake From Auto-sleep

Oct 10, 2015

My motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.

I did the windows 10 upgrade, and all seems well, except waking from Standby.

If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.

But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.

I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.

Here is some investigating I did, hopefully it works:

Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.

Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?

View 1 Replies

Graphic Cards :: Dual Monitor Setup Locks 144Hz Monitor At 60Hz

Nov 22, 2015

I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.

The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.

Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.

View 9 Replies

Graphic Cards :: Changed Monitor Resolution Now Monitor Says Input Not Supported?

Nov 27, 2015

I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.

I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.

View 6 Replies

Drivers/Hardware :: Eizo EV2750 / Windows Not Reading Monitor EDID / Only Recognizes As A Generic PnP Monitor

Feb 10, 2016

I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.

I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.

The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.

Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).

View 3 Replies

Chrome Blurry On Second Monitor After Display Scaling On Main Monitor

Aug 10, 2015

So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.

Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.

View 1 Replies

Laptop Monitor Won't Work - Go To Graphic Setting But It Only See External Monitor

Aug 14, 2015

I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.

View 1 Replies

Main Monitor Only Works When A Second Monitor Is Plugged In?

Sep 23, 2015

I am running Windows 10

MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort

So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.

View 1 Replies

Drivers/Hardware :: Replaced Wired Keyboard With Bluetooth Keyboard - PC No Longer Sleeps?

Nov 21, 2015

I recently got rid of a cabled keyboard in favor of a smaller bluetooth keyboard (MS Mobile 6000). Everything is great except that now, I have a hard time putting my PC to sleep. In fact, it tends to wake up after 30 seconds or so. I'm pretty sure this is due to the BT keyboard.

View 3 Replies

BSOD :: PC Is Crashing Nearly Every 30 Minutes

Oct 31, 2015

My PC is crashing nearly every 30min but Bluescreen view has only showed a problem with an USB driver which I already updated and now Bluescreen view doesn't log anymore Bluescreens but my System is still crashing.

My PC is Overclocked and has a 750w power supply.

I already tried reinstalling Windows 10 but it didn't work.

View 1 Replies

BSOD :: Crashing Every 5 - 10 Minutes

Jan 26, 2016

I'm crashing too often to make much progress.

So far I've seen memory fault exception and security kernel BSODs.

And a system service exception just now.

+ PFN list corrupt

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved