I have problem with my laptop.I bought my laptop about a month ago and it was very fast but after this one month it started to slow down and it gets slower and slower and i dont know whats happening ..... My laptop is supposed to be fast but something happened
I have processor:intel core i7 6500U 2.5-2.6
video card :Geforce 940M with 2gb dedicated vram
RAM:8 gb
hard drive :1000gb
Over the past couple of weeks I have experienced a general slowing down of software initiation. Programs that used to be up and running in a few seconds are now taking 20 or 25 seconds to get running. I even see delays in how Firefox operated. I see nothing in the Task Manager that waves any flags.
I have the system from a month ago on a spare SSD and booted from that. Everything is fine and runs as expected. Soon as I put he updated SSD in place and boot it - the slowdowns are back. Could this be a product of a questionable update? Other than normal daily usage, no changes have been made to the machine.
I have win 10 64-bit home on a 4th gen core -i5 laptop. I have a WDC 1T 2.5" USB3 drive. It is about half full. It used to do 60-70MB/s write speed. Since a few days ago, I noticed it has slowed down by a factor of 5-6 to 10-20MB/s. While copying large files, I watched what's going go. The System and compressed memory process was doing a lot of read and write on the disk. If the copy speed reported by the dialog is say 15MB/s, then system compressed memory process is reading 15MB/s and writing 30MB/s. It looks like this process is reading back the content written and writes back. It is consistent over reboot with several large files from 200MB to 7GB in size.
A couple of weeks ago I did a file backup. I created a 5GB virtual drive on my SSD and dumped all files to be backed up. Took only 5 minutes to copy the 5GB files to the virtual drive and copy the file to the WDC disk, at around 67MB/s, typical of this type of portable drives. While I was wondering what was going on, I tested the same files with a USB3 dock and a 2TB Seagate drive. Write speed is about 150MB/s. So I thought it was not a problem with all disks. The WDC drive has no compress to save space option, BTW. I wonder what's going on. I have AVG antivirus and I turned it off while copying and same slow 15MB/s speed.
I have two 2008 Mac Pro computers running a bootcamp setup (OSX El Capitan/Windows) and have a 50 Mbps cable connection with Linksys WRT 1900AC wireless router. The wireless throughput on both machines worked flawlessly in Windows 7 but after upgrading both to Windows 10 the throughput dropped from 50 Mbps down to apprx 1.5 Mbps. Both computers use a Broadcom 5200 series 80211n chipset which are running the Microsoft signed version 5.100.245.200 driver. The wired network runs at full speed, and in OSX both wired and wireless connections run at full speed. I've seen a number of others report the same issue, but have never seen a fix that seems to work. I've tried updating the driver through Windows but get a OS message stating that the best driver is already installed. At the moment I have Ethernet cables strung across the living room floor, and would like to get back to wireless.
View 3 RepliesAfter upgrading to windows 10 my laptop is started heating up and slowed down. I noticed in task manager there is an application named 'IAStoreDataSvc (32 bit)', its using about 30% CPU.
And when I end this app, my laptop behaves normal (no heatup, no slow down). What is this application is for?
Normally my WiFi connection is like 40-50 Mb/s, but it slows down to, like, 10 Mb/s or so with BT on. That maybe does not sound bad, but often websites are taking ages to load. I switched my router to 802.11n; even if that worked, the improvement is hardly noticeable.
What is best is that it is not always the case, sometimes the Internet speed is just fine.
I cannot download the drivers for Windows 10 from the HP website (they are not there), although they were available.
Can the Internet speed be amended with some Windows setting change?
Time to time happens that my whole windows( and everything else that could) slows down and any kind of tasks are very painful to complete. Even writing becomes very laggy.
Usually I'm in the middle of gaming and have a lot of apps opened.I try finishing what's unfinished and close everything(usually at this step I restart my computer). By checking task manager I can see memory used at 99%. Last time I was curios how slow can everything finally turn(since it slowed even more down with time) and after about 15 mins cpu usage hopped to 100%. Then both my screens turned black(only mouse cursor didn't disappear) and I had to hard shut down my computer by the physical button. So far the only solution to this has been restarting the computer.
Mobo: Gigabyte GA-Z97X-GAMING 3
CPU: Intel® Core i5-46903.5GHz
RAM: Crucial Ballistix 8GBDDR3 1866MHZ Kit Of 2
GPU: MSI GTX 780 Twin Frozr IV
Storage: Samsung 850 EVO 250gb(windows on it and some apps), WD Black 1TB 7200RPM PSU: Enermax ATX 2.3 Revolution X't 730W
Plus, Windows 10 Enterprise 64bit
I've notice that on windows 10 and 8.1, task manager would show the my max cpu core speed is 2.3-2.4 ghz. However, my Core 2 Quad q8400 is rated at 2.66 ghz. I tried changing the power settings in windows and try lowering my cpu temperature, but my speed would never reach 2.66 ghz.
View 7 RepliesMy PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
I'm facing a problem with the task manager. Suddenly both of my HDs stopped showing any activity in the task manager and are constantly show 0% although there is activity and despite the fact that in the resource monitor activity is shown properly. What the fault might be?
I think they've stopped after I connected an external HD. But I am not sure though so don't rely on that being the issue.
I have been having some really annoying performance problems after upgrading my laptop from win8 to win 10.
My laptop is a asus ux32vd, with an Intel i7-3517U cpu.(normal core speed: 1.7ghz, turbo: 2.4ghz)
CPU-Z is showing ~990mhz constantly, no matter how high load there is on the cpu, and what temperature it is(usually around 50-60C).
I just cant figure out what is going on, and why it keeps throttling. Everything is running really slow, chrome is slow, facebook is tough to scroll through. Tried resetting the power plans to default, that didnt work. sometimes it works for changing power plan, and the restarting, but its not consistent at all. What it could be?
Is it possible to make a .reg file to optimize my visual effects for best performance for all users that sign into one PC?
I want to do this because we have many people who sign into the PC via our Active Directory through the network. If I can get a .reg file that just applies this to all users that would be awesome!
Asus UX305F laptop I bought last week. It's working fine apart from a couple of things:
- When the battery is getting low, say from 10% and down, the performance drops dramatically and everything, particularly the internet, runs so slow that it's almost impossible to use until I reconnect the charger. I've changed the on-battery power settings to match the performance settings when it's plugged in and it hasn't made any difference.
- When I'm using the laptop in my bedroom which is adjacent to the living room where the WIFI signal is coming from, the connection is extremely slow, much slower than my mobile phone for example. In the living room I average about 50mbps whereas in the bedroom I'd be lucky to get 20mbps though my phone can get about 40mbps in the same room.
,I have lapton Asus x550cl and recently my pc started lagging. Laptop is ~1year old.The fan sounds really loud ,pc get's really hot can't really do anything it's too slow, when i unplug my charger then pc lags so hard that it is almost unusable.
View 9 RepliesI've just installed my windows 10 and since it was running slow on a 2gb ram, I decided to buy a 4gb stick on my 32bit system. Long story short, it only shows 2.2gb usable. 768mb(or something close to that figure) is reserved for the videocard but I think I still should have 1gb more. Ive tried the unchecking the maximum memory and didn't work. I've tried all possible solutions that I could find on the net yet no progress. Except for one, which is updating the BIOS, of which I am particularly bad at trying to figure out how. Anyway I'll just attach some of my computer information ....
View 9 RepliesQuite often my C: drive is used 100% blocking the system for tens of seconds up to few minutes.
I've tried turning off the antivirus, firefox... same thing.
After updating to Win 10 recently, I realized that I was lagging everytime I run some games. Even exiting them, it would still continue to mess up my CPU with heavy usage. With 16GB of ram this shouldn't happen. While in game, there was heavy graphic lag. I turned off all my additional programs in the background, did scans of CCleaner and my Anti virus. I also cleaned up registry with CCleaner.
Did some research previously and also turned off all the Customer Experience Issues in the Task Scheduler. This issue still happens every now and then. How do I check what exactly is the rundll32.exe is coming from?
i7-3770 @ 3.4GHZ
16GB Ram
Motherboard: MSI Z77MA-G45
64-Bit Win10 Home Edition
GPU : AMD Radeon R9 200 Series(I believe it should be the 270)
500Watt power supply
So I've and tried some more and I cannot seem to get my PC to Sleep. I was upgraded to Windows 10 Pro from Windows 7 Ultimate. It's a custom built rig for gaming and streaming movies. Not sure why, but I put it on sleep, I see the PC go down as if it's in sleep mode and then I leave the room. I go by the room again and the PC is back on.
View 3 Replieshow can u fix this problrm?
View 7 RepliesI am puzzled by the term backup when you go to Settings > Backup.
I have a folder on my NAS defined as my backup drive.
I have set the time interval to every ten minutes until I am sure of what is being backed up.
Does the backup process store MY files as opposed to WIN 10 files in that folder and could be used to restore them if I had to re-install Win 10?
When I try to delete the remaining folder after uninstalling a software in Program Files I get a message: "You require permission from SYSTEM to make changes to this folder", although I'm the administrator.
View 9 RepliesFor some reason starting about a week ago certain processes occasionally become suspended on my laptop. I'm running Windows 10x64 Pro on a Sager laptop with 16 GB of RAM and then i7 processor. The processor becomes suspended varies but IE 11 is one of the ones that become suspended and when it does obviously cause all kinds of problems. I'm attaching a screen capture showing 4 processes that were just suspended when I checked. How this is happening and how to prevent it?
View 2 RepliesOkay, Well windows 10 is giving me crap. I have two memory slots, 1 is being used. It tells me that i'm using, like 2.0 GB out of 1.6GB. What? I disabled page-file for much faster speed, and it worked. But i'm not even using 1GB in memory, even when i plus all the memory used together.
Btw i cannot turn page file back on, lags WAY to much. And this is a new hard drive.
I have an HP Pavilion 500-123a PC running Windows 10 which has been freezing and crashing frequently.I have attempted several diagnostic and fix options about which I have posted to this forum before, though the difficulty thus far is unresolved.In particular sfc/scannow does not complete; halts at 56% with the message Windows Resource Protection could not perform the requested operation.
I also attempted a Repair Install using the Media Creation Tool iso file. This was initiated in the administrator account (PC has two accounts) and got to 97% when it failed with the error message We couldnt install Windows 10, The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation error code 0x8007002C-0x4001E.The diagnostic software PC Health Advisor only came up with 2 registry issues, without specifying further.The Dism tool was OK however reporting.The component store is repairable. The operation completed successfully.Given that the PC is still freezing/crashing at this stage I am perplexed regarding how to arrive at a diagnosis and fix and, again,
I set it to my lanugage Turkey as TUR whenever I restart or close and open the pc the the language changes. I just want the keyboard language to stay on TUR.
View 5 RepliesI had to do a pc reset on a different pc. Everything went ok and pc reset froze at 10 % for ages.So i turned off pc and restarted it hoping this should be ok. Pc restarted ok but a box appears stating windows installation encountered an unexpected error click ok and restart pc to continue installation.
I follow the step but all i see is at bottom of screen with Delete and F2 BIOS setup and same message appears.ie my pc gets into a loop. How do i get my pc working again..or is pc useless now ?