Performance :: Restoring Folders From Backup
Mar 5, 2016What is the name of the folder where my Live Mail contacts are stored?I've lost them & I'm hoping to restore them from a Backup Image file...
View 1 RepliesWhat is the name of the folder where my Live Mail contacts are stored?I've lost them & I'm hoping to restore them from a Backup Image file...
View 1 RepliesThough I use Macrium for backup but few months back I created a Backup of one PC with Redo and saved the backup directly in pen drive but forgot to format the pen drive in NTFS and it remained Fat32. So the Redo created backup in four parts i.e part2, part3, part4 and part 5 ( I do not know why part 1 is not there) total 7GB. My question is whether Redo will be able to restore the backup from these parts or I will have to first joined the parts which I do not know how?
View 2 RepliesI upgraded my system to Windows 10 back on Aug 6th and didn't have any problems until yesterday. I won't go into the details of that issue but it forced me to restore Windows 10 from an Acronis TrueImage backup I had taken on the 8/7. Although the restore went well and Windows 10 is back up and running, I am unable now to run Windows update as each time I do so it give me this 0x8024402F error that says that there was some problem installing updates.
Note that this is not an internet connection error as I can browse the internet and download updates to other apps. I have tried the Windows 10 Troubleshooter for Windows update as an Admin and it says it found a configuration problem and fixed it but I still get the error. I have run various system scans and a CHKDSK and they find nothing wrong. I have searched the internet high and low for a solution this problem but the only thing I find seems to be focused on fixes to Windows 7 and Windows 8.x, not Windows 10.
Had some issues with my PC with user profile, so restored a 3 day old acronis true image backup.
now none of my external HDDs are recognized, by Windows or Aome hdd manager either.
USB pens are ok.
I am a noob when it comes to backup and restore. After many years and many iterations of Windows, I finally tried to backup my files and folders. They have been stored to an external HDD.
I ran into an issue with Win 10 that required a complete clean install of 7 and then upgrade to 10 again. The drive was completely cleaned.
Upon install, I can only see the backup I created after the new install.
From the backup drive, I can see many files when clicking on the drive to view content. The laptop has been renamed. How then can I restore the files from the old setup?
In my LAN I have a PC, NAS and a Laptop. I need to schedule a backup from NAS to PC once a week. My NAS automaticaly powers on but I need my PC to do the same and to copy certain folders from NAS to a backup folder in my PC. The NAS has a letter asigned in my PCs Windows Explorer. Fist, it needs to delete those folders from the previous backup, and then to start backing up from NAS.
View 9 RepliesI am puzzled by the term backup when you go to Settings > Backup.
I have a folder on my NAS defined as my backup drive.
I have set the time interval to every ten minutes until I am sure of what is being backed up.
Does the backup process store MY files as opposed to WIN 10 files in that folder and could be used to restore them if I had to re-install Win 10?
Just bought a new Windows 10, Office 2016, Ultra HD Lenovo computer. Already having issues, surprise surprise! Not only are there scaling/blurry issues with some apps, but Windows Backup and Restore is displaying the following error:
The semaphore timeout period has expired.
I'm trying to backup to an external Seagate drive.
I've tried several fixes as I was previously having this issue too ([URL]), but nothing has worked.
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
I just bought a WD My Passport Ultra and it comes with a copy of WD Backup. Never using backup software I decided to give it a try and see what happens. I had no problems at all until I ended up with a message "These files failed to back up: UPPS.bin, 15.77kb". so I decided to try and find the file, which I found. The question is, what this file does and is it necessary to backup? Probably most of you know where this file is but for those who don't you can find the file at: C:UsersUser NameAppDataLocalMicrosoftWindowsUPPSUPPS.bin.
View 6 RepliesI am in of a "Free Back/Recovery Program" that is so EASY as pie to understand. I want to backup my pc and also be able to restore and all of this has to be easy for me to run it. I will be backing up onto my external harddrive.I have tried Acronis True Image and to hard to recover back my partitions and etc..
View 9 Repliesaddressing in order to not lose my data. To give a bit of background, my laptop has 2 internal hard drives, 1 is my main/primary drive which I used for day to day operation and the other was just a backup drive which has a system image of my system.
My main drive failed, and after many horrifying clicking, scratching and high pitch squeals coming from the drive, I can only assume it has failed mechanically and isn't some kind of virus. So now I'm currently left with only my internal backup drive with a system image on it.
I was hoping to use this backup drive as my new primary drive, however I want to keep the files on the backup drive. I checked with my Hirens Boot CD and saw that my backup drive contains everything my other hard drive had, including the operating system contained within the Windows backup folder.
Normally for this I would install windows on another hard drive and then restore my files with the system image. However my laptop doesn't have a system restore disc or a copy of windows, it instead came with partitions on the hard drive which requires erasing my backup and consequently losing all my data.
I finally ask the question, is it possible to use the files currently stored on the backup drive without having to resort to buying a new hard drive to copy the files across and then partitioning my backup drive?
My wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 RepliesWhenever I do the File History Backup; at completion it gives me the following message: "Backup encountered a problem while backing up file C:UsersAdminSkyDrivePictures. Error: (The system cannot find the path specified. (0x80070003))". I believe this occurred for the first time after I upgraded from Windows 7 to Windows 10. I no longer have a SkyDrive folder it was replaced with a OneDrive folder. For some reason it is still looking for the SkyDrive folder. In the "Exclude from File History" screen I am unable to exclude the SkyDrive folder. I guess that doesn't surprise me because I no longer have SkyDrive folder. How then do I prevent this error occurring when doing a File History backup?
View 4 RepliesI made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 RepliesLong story sort I kind of messed up my GPT partition table. I have backed up an image of my Boot partition only (C:) and not any other partitions such as bootloader etc...
So my question is, would I be able to start all over, re-format the drive from Win10 installation media and do a clean install, then paste my backup onto just the boot partition leaving everything else in tact? I know how to rebuild the bootsector in case I can't boot.
Edit: Wasn't sure if this should go here on into the Install section, mods feel free to move it if needed.
I've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
I have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
Now that my computers are updated to Windows 10 , are the old back up disk images with win7 of any use ? Can they even be used to revert back to Win 7 ? Should I just delete them and make new disk image with win 10.
View 6 RepliesI've noticed after upgrading Windows 7 to 10 that Backup and Restore (from 7) remains available in the Control Panel. The app appears to work, but I tried running a backup, including system image, on a friend's system and heard that it failed. I haven't looked at it yet, but wondered if perhaps this app doesn't work properly in Windows 10?
View 6 RepliesI just upgraded from Windows 7 home premium to windows 10. When the automatic backup that I had scheduled under windows 7 ran, I got an error. When I try to run backup manually, I get an error saying that I don't have enough space. My C drive is a 745 GB drive with only 128 used. My backup drive is one TB with 438 used and 656 free. I would think that would be enough space. It always worked under windows 7. What do I do?
View 3 RepliesI've backed up my registry twice recently, and I noticed a huge difference in the size of the backup file. Two days ago, the backup I created was 18,066 KB. The one I created this morning is 247,691 KB. Should I be concerned about this, and, if so, what can I do about it?
View 3 RepliesAfter spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
View 9 RepliesI have 2 laptops, both using Win 10
Can I use Win 10 backup app to enable me to back up both laptops to one external hard drive?
I have a problem with windows system image backup. My OEM windows 8.1 was installed on normal HDD with mbr partition config. so i bought an SDD make an image back up from my drive c. and then use windows DVD to recover(install) the image on new SDD.
Now after i upgrade to windows 10 i learned that i could change mbr to GPT and use EFi boot instead on using old legacy boot option. Now after doing all these without reinstalling windows(cause I cannot go back to win 8.1 anymore)
I decided to make a image back from windows 10 so i can restore to it in future. The problem is every time windows tries to make an image, when it start to make an image from EFI partition it ran into this error : (the specified backup disk cannot be found) 0x807800c5