not sure since when and how ( must have been recently ), but my windows 10 got probably infected, whenever i start pc, my cpu usage jumps to 55% ... After I open task manager, i can see this ( attachment ) :
The PID of "faulty" service is always different and if I stop the process, i am ok until next reboot. Windows defender detected nothing after full scan, I have never downloaded any exe files or opened some bad web page, only .mp4, .avi files and games from Steam.
Should I format and reinstall windows, just to be sure or is there some other tool to find out what happens / fix my problem ? I have no important data or work on my pc, so format is ok, I just dont want to spend several hours reinstalling everything...
I just recently installed Windows 10 on my Dell Inspiron Laptop and so far I am not impressed at all - in fact, I am very seriously debating one of two actions - re-install Windows 7 or switching to an entirely different OS.
The reason for reverting to Windows 7/switching OS are as follows:
1) Currently with an idle system (i.e. no applications running at all), an svchost process is using anywhere from 40 to 60% of my cpu. When I did a tasklist on this process the following processes are attached to this one pid: Appinfo, BITS, Browser, DsmSVC, IKEEXT, iphlpsvc, LanmanServer, lfsvc, ProfSvc, Schedule, SENS, ShellHWDetction, Themes, UserMananger, Winmgmt, wuauserv. My question is this - is it necessary for these processes to be run. If they are, then am I looking at only being able to use 50% of my processor (since this one pid is using the rest of it)?
2) For a virus scanner - I am using McAffee and under Windows 7, it took my laptop 24 hours to scan 231 GB of data. Since I switched to Windows 10 (Same hardware, same memory, etc) it now takes my virus scanner over 48 hours to scan 231 GB of data.
3) If I had not been poking around and trying to change my update settings, I would never have found out that Microsoft expects their users to update the windows of the other users (Microsoft calls it Dynamic Updates). Now this is all well and good if some one had said something since I would have loved to know about it sooner since I am on a metered service.
4) Some of the programs that comes with Windows 10, I have no use for but yet I can not un-install them (Cortana come to mind).
5) It appears that even though I have turned off "Live tiles" the tile continue to update from the net (again - it would have been nice to know since I am on a metered service).
The only option that I know of is to revert back to Windows 7 or switch to a new OS.
What services of svchost should I disable? I think it's eating up my memory. I think if the computer has 2GB RAM, it should have only like 30-40% usage but I have 63%
i'd just fresh install win10 pro 64bit and my only 3.21gb of ram usable out of 8gb..
im using asus x550d Processor AMD A10-5750M APU with Radeon(tm) HD Graphics, 2500 Mhz, 4 Core(s), 4 Logical Processor(s) win Version 10.0.10240 Build 10240
When I was running Windows 8.1, I had this same problem. Upgraded to Windows 10, issue persisted, until I reset the PC (August). After I reset, CPU usage was normal. A few weeks ago, though, CPU usage has jumped right back up to 100% (per Task Manager). I've tried running malware/virus scans, updated SSD firmware, looking for resource-hogging processes, and none of it has been conclusive.
I am running Windows 10 Pro. Over the last couple of days, for some reason, the OS reports 100% disk usage, even when no application is apparently running. It was quite alright a few days ago, but troublesome over the past 2 days. I had assumed it was running some background task, and would become normal, but the abnormally high disk usage persists even after the machine has been running for half an hour.
In this period, no Windows updates were installed, and only a scheduled checkpoint was created 4 days ago. If I try and restore to the checkpoint during boot, I get an error, saying the PC needs to be repaired. If I try it from the recovery option in Windows 10, it does not shut down for a restart, just keeps on the blank screen saying "Initializing restore". The entire time, according to the indication light, the disk seems busy.
I tried disabling superfetch and background intelligent transfer service, but did not work. The spike in disk usage is not specific to anything, sometimes it is the system, other times the malware service...
I do not wish to reset the laptop, as I had quite a few things installed, but I do not have the installation media for those anymore, and so would not be able to install them again after the reset.I have the installation iso for Windows 10. The laptop is Dell 17R SE 7720. I had upgraded to Windows 10 Pro almost 2 months ago, and it had been running fine.
This is not an issue but more a curiosity. I have the old Windows cup / ram monitor running as a gadget on Windows 10. When the PC is idle for a few minutes I notice the cup usage always spikes to around 10-13% and stays around that mark. As soon as I touch mouse and move it it then plummets to 0 or 1%. Is this normal? I wonder what it could be doing. It's not as if I can use task manager to see because as soon as I move the mouse or go to use the PC the usage returns to 0 or 1? I presume Windows is doing housekeeping stuff and it's a non issue?
My laptop's CPU usage hit 100% and stayed there, and the fan came on even though the CPU and HD temps were normal (CPU 44-47C, HD: 39-42C). Any thoughts on what happened? Restarting seems to have fixed it, at least temporarily. I'm doing a virus scan, and I'm going to start going through the logs, but which of the vast number of logs I should start with.
NOD32 and MalwareBytes both say no threats, malware, etc.
This started back when I was running Windows 8.1, so it isnt new to the Windows 10 installation. Every now and then my laptop will get really slow. When I look at the task manager, I will see that CPU usage never goes above 47% and it seems like it is speed locked to 1.19 Ghz.
Dell Latitude E4310 Core i5 540M @ 2.53 Ghz, Turbo to 3.06 Ghz 8GB RAM 180 GB Intel 330 Series SSD Windows 10 Professional
Those are the specs. This happens even right after a clean install with absolutely nothing else on it except for what comes with Windows. Ive looked into the BIOS to make sure those settings are valid and Ive looked into the power options under windows to make sure something isn't weird there.
I need diagnosing why my system disk is running at 100% without anything actually running.
My Anti Virus is not doing anything, windows update is not doing anything, and my disk is not defraging.
I would have never noticed this happening if it wasn't for long load times and reduced FPS in anything 3D. My mouse and keyboard even are lagging and hanging.
My system disk is at 100% and a constant write speed of 1-2 MB/s and a constant read speed of about 200KB/s.
How to diagnose what is using my disk 100% of the time?
Basically I noticed that my PC has a lot of RAM used but no program is using the RAM - see attached screenshots. Obviously it doesnt really affect me until I launch a game: eg GTA 5 which before ran happily at 60 and is now stuck on less than 1 FPS when I get into the game (even after spending like 20 minutes in lag hell to try to reduce all the settings to the lowest).
However Rainbow Six Siege runs at 120 FPS with no issues, so GTA may be an isolated incident.
(Also important to note I only have 8Gb of RAM, even though it says */16.0GB for the committed memory)
Since I upgraded to Windows 10 from Windows 8.1 (who knows when, within the week of first release) I've had a plethora of issues, and recently I found the source of the problem. My computer spikes to 100% disk usage randomly, even with nothing open and will suspend all applications on the computer. A couple of random things can set it off (sometimes when I open the "Search the web and Windows", open an application, Ctrl+Alt+Del, and ALWAYS when I boot my computer)
I've tried every. single. thing. that I have seen on the internet including but not limited to: superfetch, registry stuff, Unistack thing in task manager, Windows defender, uninstalling programs, defragmenting my 1TB Western Digital HDD even though it says 0% fragmented, cleaning up my HDD, checking if my HDD died which it hasn't, and updating my drivers, stopping all startup programs, disabling unused Windows apps, though nothing has seemed to fix the problem permanently. I also used to get this "Display driver AMD has stopped responding but has recovered" though I edited something in the registry and it doesn't show this anymore but I still experience the same problem. I'm quite fed up with this, and I'm thinking about buying Windows 7 in an attempt to downgrade.
For some reason, my disk, when i open my computer and at some other point, always spikes up to 100% for a few minutes.
This happens when :
at the start, Something called System and compressed memory always make my pc go to 100% disk usage. Later on, there are all those Service Host going up to 100% and something called RzStatsManager
When i open norton or when i download something new it also goes to 100%, each time I open google chrome too and Steam make the disk go to 100% at the start and every time i open it it goes to 20% and the system memory goes to 80%...
All these times, the disk spiked at 100% for a few minutes.
I disabled all my notification, each time i open my PC i disable Windows search and superfetch but it spikes up every time. What can I do?
I have this issue where windows seems to hang/get stuck every 5 to 10 seconds for about 2 seconds, like right now while I am typing. I type the words and about three words types out and then hangs for 2 seconds and the rest I typed while stuck gets lost and I have to backspace and restart again.... Same happens with mouse clicks, sometimes when I click it does not register (I presume it is right in that 2 sec delay sweet spot) but the mouse cursor movement is smooth and does not get stuck.
SO I checked my Task Manager and found that RAM,CPU and Network are all low in the 10% - 20%, but my HDD Runs at like 80% -100% all the time. See Screenshots of Task Manager and Resource monitor. The disk keeps getting used full load every 5 to 10 sec.
I have tried disabling Disk Defragment service in the Task Scheduler and several other tips I found on the net but no luck.
I have recently noticed a bit of a performance issue on my HP laptop running Windows 10 Home.
What happens is, if I am not doing anything on the laptop, but am not putting it to sleep (i.e. idling), it stays at a low CPU usage. However, after a while (usually about a minute?), the CPU usage rockets up, and also affects my CPU temperatures (goes up from ~35'C to ~50'C).
The processes that are the culprit, as defined by the detailed tab of Task manager, are either "svchost.exe" or "System" - the latter is described as "NT Kernel and System" and is linked to ntoskrnl.exe.
The laptop came preinstalled with Windows 10 and doesn't have many programs installed.
I have found that my CPU usage is running at 30%, due to Service Host: Local System (15). I have the list of the 15 processes, but how do I find which one is using all the power.
I started experiencing this after my brother installed some malware on my pc while playing CS GO. I have removed all the malware i could find and have ran memory and disk tests which have shown me nothing but positive results, but when i run furmark the disk usage climbs to 100%. I also have noticed my nothbridge overheating which might be the issue. I also have a shady 600W psu that needs changing because it is old and I don't trust it.
I have
CPU: intel i5 3330 GPU: Nvidia gforce gtx680 refrence RAM: 8GB kingston value ram PSU: 600W super cheap generic psu that came with the case HDD: wdc wd5000aakx-001ca0 500GB that needs changing MOBO: msi MSI H61MA-E35 (B3)
[code]...
Edit:I found out the reason for my hdd stopping while under load was that one of my 6 pins was a 2molex to 6pin adapter and one of the molex cables was also the one powering my hdd through a sata power cable.So i plugged in a different one and now it's fine.
So up until this morning my Windows 10 desktop has been performing really well. When the machine is idle the CPU use is only in the 1-3% range.
For some reason my idle CPU use is now CONSTANTLY 30-40% (even after a reboot)! Task manager says its "Service Host: Local System (15)". If I expand this process in task manager it lists:
Why is this happening all of a sudden? I have all Windows Updates installed and I run an i7-3770 CPU.
My machine is now slow/sluggish with 30-40% being hogged by these services!
I don't have any Malware installed as I run Malwarebytes Premium and the scan comes back clean. Some goes for a full anti virus scan.
After installing Windows 10, I have consistently been getting high memory and cpu usage by both the System and Service Host: Local System processes. Usually the usage keeps rising from 1GB to sometimes 8GB. I left my comp on while I was at the gym today and came home to it prompting me with a low memory available message. This must have shut down some processes because now my pc is running at 13% memory and 2% cpu. I have searched for this issue and found similar threads, but none of the solution work for me.
I've had this problem where my disk usage would spike to 100% before going back down to like 2%. I looked at countless forum posts and different sites and I found something which was a temporary fix, which was turning off tips about windows...
That worked for a while, and it just makes the intervals in-between the spikes longer, and now my memory has started to spike pretty high to about 99%, and wont come back down. When it does this I have to do a hard shut down as my pc just slows to unusable...
I also tried disabling ndu.sys in the registry, which didn't work either.
I have this problem where after some hours of use (~3, for example) the windows explorer takes up 40-50% of the CPU causing major performance loss. I do not know what is causing this problem, as it does have to do with my activity, since when this happens I am not using the explorer in the means of opening a file or moving data.
- HP Pavilion g4 - Intel Core i3 2.2 GHz - Radeon 6470m (but somehow got 7400 driver and worked) plus Intel HD 3000 - Windows 10 of course - 2 gigs ram - And latest drivers, checked with Uniblue's driverscanner and link on other subforum stickies.
It's high memory usage of this process, it starts with ~7mb then grows up to ~200mb on heavy use. This happen with recently windows 10 update.
What I have done is, I do a restart every time I made these changes:
- SFC /scannow - Update driver (again) - Turn windows 10 tips off - Try disable Superfetch - Malwarebytes scan - Disabling High Definition Audio driver drops the process usage to normal 28kb, but this somehow rise again to ~100mb.
I just upgraded to TH2 from Win 10 Pro. I noticed that my disk usage is near 99% for the past 20 mins. It keeps fluctuatiing between 10 to 99. Normally my disk usage stays at 0. May be this might be Windows settling in after the upgrade? There was high disk usage the first time around when i upgraded from Win7.
