Performance :: System Drive In Optimize Drivers Always Stays At 4%
Mar 5, 2016
My computer was running fine until January but suddenly I open optimisation tool to check if everything is all right but i find out that it stays on 4% whenever I open the optimisation tool and when I click on analyse then it says 9% fragmented but when I click on optimise it stays at 4%. I also had ISO file problem but i solved that and now today, I opened optimise tool and it now shows 9%.
When I go to Defrag it will say I need to optimize my c drive, but when I do this it keeps coming back as 31% fragmented, I have 98.2 gb free of 192gb. It worked o.k. on W7 but will not work on W10.
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Shadow Copy Storage association For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
I run uninstall a program and the program disappears from the Uninstall or Change A Program menu but the program is still on the system and operates perfectly.
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
So overall, I was having a issue with creating a system image. It would state that "The specified backup storage location has the shadow copy storage on another volume (0x80780038)"
After reading several forums I found that if you delete the restore points you are able to create a system image.
During my troubleshooting, I was attempting to backup to a 64GBthumb drive (this worked in win8 and win7)..
As I was trying to use the thumb drive, I ran into the following issue..
First it says it needs to be formatted to NTFS. Once I format it to NTFS, it says "The drive is not a valid backup location"
Images I found - [URL] ....
I do not want to use any 3rd party software to accomplish this.
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
I was trying to do a system backup on an external hard drive in windows 10 and once it started i noticed that it was creating a backup for my old Windows 7 64 operating system. How do I get it to back up my current Windows 10 system and all of my files on the C: drive.?
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10 It' s a custom built pc with: i7 4770k GeForce GTX 770 2GB 8gb RAM 230 gb of SSD (primary drive) with still 70gb of free space 1 Terabyte of Hard disk (secondary drive) 230 gb of external TrekStore drive (NFTS formatted)
On my laptop I have a 1 TB HDD and on that drive the usable space was formatted into 2 separate partitions. This doesn't work well for me and I would prefer to have just one partition with all of the usable space. So I've tried everything I can think of and for some reason I just can't get the partitions to merge or even delete the secondary partition and expand the one I want to use. I have some pictures below to show what's going on.
This one shows the two partitions that I want merged.
This next one shows that I cannot extend the partition even if the other partition was deleted and is unpartitioned space
This last one shows that even with a 3rd party software I get the same result as EaseUS Partition Master doesn't give me the option to merge or move/re-size the partition
So at this point I'm stumped and I don't understand why this won't work as I've done the same thing with many other computers easily in disk management.
Recently upgraded to Win10 pro 64bit. I have an ASUS HD7770-1GD5 video card running both a 26in HD wide monitor as well as a 17in square non HD monitor. Duplicating the screen content on both is what I need. Somehow I had this working great in Win 7, but I must have something set wrong, as the content on both monitors now is indeed the same, but the square screen displays in landscape mode which makes it difficult to see. The clarity of the wide screen monitor is much less than optimal as well. What are the correct settings for this type of setup? I have the widescreen connected via HDMI cable and the older square LCD monitor is connected from the DVI output to a VGA adapter for the monitor.
I found out that the hard disk is 100% utilized. In Task Manager, the process that utilizes the disk the most is ESET Service. If I open Resource Monitor there are many instances of the System process that are reading the disk, not writing it. I have two partitions on my disk - one for the system and the other one for data; the extensive disk reading is done for Pictures (I assigned a folder with pictures, about 140 GB in size, to the system My Pictures folder) on the data partition.
I am not running any tests in the ESET Endpoint Antivirus software and it seems to me that the high disk activity starts when I do not do anything and just e.g. browse Internet or look at something. So, it feels like Windows is doing something, but what it is and how I can influence it. If it were disk optimizations I think I should see also disk writes, not only reads. Could it be that Windows is doing something automatic with Pictures, Documents, etc.?
I wonder what is going on - I dislike the fact that something is going on with the hard disk, making is 100% utilized and making other work very slow and non-responsive.
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
I've discovered one useful feature of Edge is the ability to cast video to my Sony TV. However, the playback is sometimes jerky. Is there a way optimising the playback settings when casting videos via Edge?
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
I recently installed an SSD and I found out while running Samsung's OS Optimization disk that it has turned off System Restore by default. I of course can turn it back on, but I wanted to get feedback on turning on System Restore on an solid state drive.
This morning I turned on my HP All In One and the screen stays black. I had 10220 loaded but I don't know what happened until I went to this forum on my other system and discovered 10240 was released.
My usb fan i bought that sits under the labtop to keep it cool don,t go off now all the sudden since i had to change the bios setting to allow usb devices to wake computer.because i changed that setting so i would not haft to keep pushing the power button to make it go to sleep an since then now my power to the fan won,t go off.
I have multiple PC's running W10 v1511. For some reason at least one of them and I suspect more than one will automatically restart after it has been shutdown. The restart does not occur immediately, in fact, it is several hours before the magic happens! The reason I know it's happening is the system will be in a sleep state when I check it in the morning after I know I shut it down the night before. The PC in question is the one that I have described in my system specs. I know all about the "Wake On" settings in the in the Intel network controller. I have them all turned off (unchecked) but that only effects the system when in sleep mode? Is there some other setting that could be causing the system to refuse to stay shutdown?
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.