I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10
It' s a custom built pc with:
i7 4770k
GeForce GTX 770 2GB
8gb RAM
230 gb of SSD (primary drive) with still 70gb of free space
1 Terabyte of Hard disk (secondary drive)
230 gb of external TrekStore drive (NFTS formatted)
I currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
I wanted to make an image of my machine since upgrading to Windows 10 and saw it kept on including my secondary drive (which has over 600 gigs of movies). I am not able to uncheck it.
I figured what the hell and disconnected the drive.My box will not boot without the drive!
I just built this machine back in December and I used a 500GB SSD for my main drive, while I have 2 regular HDD's for storage and movies.
I turned off, "hide protected operating system files" and found the folders "Boot, Recovery, System Volume information and $Recycle Bin" all showing up!
how this drive got dragged into the install, but I certainly do not want my main drive depending on it to boot.
I don't want to change ownership of the files and delete then manually either since I have a strong feeling it will kill my system.
how to go about "unlinking" these 2 drives?
Windows recognizes my secondary drive, a Western Digital, SATA WD5000AAKS 500 gig. However, anytime I access it the system lags, files freeze and it acts like it's being re-cataloged. I never had this problem prior to Windows 10, and my other computers have no problem accessing the secondary drive through the Home Group.
View 2 RepliesMy PC has three hard drives. A Samsung solid state drive (840 series) that has windows and all games / programs on it, and two older Samsung HDD's (HD753LJ, about 7 years old) that I use to store videos, photos, music etc. It had been working fine in this configuration with Windows 7 for years.
I recently upgraded to windows 10 (in place upgrade, not a clean install) which worked OK except one of the two HDD's was not found by Windows 10. After a couple of turn off / turn back on cycles it found it and was OK for a little while. However it stopped finding it again and now hasn't worked for a few weeks.
If I boot into BIOS it lists all three hard drives as boot options, but only two come up in disk manager / device manager / my computer within Windows 10. Is this a Windows 10 problem or is the hard drive dying? (The timing would be very coincidental if it's not a windows problem).
I just upgraded to an SSD and installed a fresh copy of windows onto it. I would like to delete windows off of my old hard drive and delete the old drivers off of it as well. I have a bunch of games on it that I'd rather not have to re-download so is there any way of doing this without formatting the drive?
View 1 RepliesI set the Storage option for Windows Store to start installing apps too my D:/ Because of that, it created a folder called WindowsApps.Now it's time that I want to delete that folder, and all access is denied.
I tried changing the permissions to my admin account and all, but I'm still not able to remove it.
Is there any way for me to remove this folder without having to reformat the drive?
I have two hard drives in my pc. One is a small ssd for windows and the other is a large HDD for all of my programs and games.
I want office to be installed on my HDD. I bought office and downloaded the setup file but when I run it, I get no options or anything.
As soon as I open it it installs office to my ssd but I want it on the HDD. How do I install it on my HDD?
is there a way to move the browsing cache from Microsoft Edge to a secondary drive?
View 3 RepliesI just built a new PC:
MSI X99A Sli Plus
PSU Cooler Master V550
5820K
DDR4 32GB
Nvidia Quadro K2200
Samsung SM951 256 GB M.2 boot drive
I installed Windows 10 PRO, and played with it for some hours with no problems. I also run Intel XTU to stress it and all is good.
Now I want to connect the hard drives from my old PC but I have this problem: after a few minutes into windows or even at boot, the PC freezes with machine_check_exception blue screen - no numeric code at all.
I tried to connect an old WD 1TB disk, an old Maxtor 1TB disk and also with a brand new Samsung 850 EVO 1TB, these drives connected to different SATA ports each time.
When I detach all the drives apart of course the boot drive, the PC will start normally.
Later I tried to connect the new SSD (one SSD is M.2 boot disk, the other is SATA data disk) and I got into Windows, had the time to format the SSD data disk but then on the next boot I got the same problem.
Could it be some UEFI settings?
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 RepliesMy laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
Why does my wifi disconnect when computer not in use?
View 2 RepliesMy Lenovo Yoga 3 14 running Windows 10 x64 is disconnecting from the wifi for some reason. It will randomly disconnect from my wireless internet. None of my other devices are having this issue and my roomate's computer is fine as well.
View 1 RepliesMy question is in regards to shared folders. I run a desktop and laptop connected by ethernet, through a router. Both machines run Windows 10 Pro. Both machines have static IP addresses setup in the router. I do not use a software firewall and both computers are allowed onto the network.
I share folders on both machines in order to run client software on the laptop which connects to the flight simulator on the desktop. All of the shared folders have full control setup for everyone in both security settings and the shared folders tab.
There are HomeGroups set up on both machines with the correct information.
The problem (finally you say) is that occasionally, one computer cannot open the shared folders on the other over the network. This doesn't happen all the time, nor is the solution consistent. Sometimes closing and reopening the network folder fixes it. Sometimes just waiting does it. Other times, I have to reboot the computer(s). This creates issues with my client software trying to connect to the desktop. The error is: 0x80070035 Windows cannot find.....(to paraphrase).
I should point out that the other machine shows up in the network folder. I just can't access it when this happens. This happens mainly on the laptop attempting to connect to the desktop, although once in awhile the desktop cannot find the laptop.
I have checked and rechecked settings, deleted and rebult the HomeGroup, ensured password protected sharing is off, network discovery is on; amongst other things. I read about changing the shared computer name to its IP address. I also read somewhere about changing a number of registry entries that would force a change in Windows network behaviour.
I am being troubled by repeated occurrences of the Disconnect and Connected sounds. I am trying to identify what is causing these and thought there might be a clue in the event logs. Does these events are logged?
View 9 RepliesI had to reinstall from scratch Windows 10 Enterprise 32-bit on my Dell Venue 8 Pro 32 GB tablet. After the first installation, the Bluetooth keyboard and mouse (both work fine under Windows 8.1), disconnected after 10-12 seconds. However, probably after one of the automatic updates, they started working normally (it took about a day or so).
Now, after the 2nd Windows 10 installation, the problem with Bluetooth keyboard and mouse reappeared. I forced the Windows updates, but no luck.
It's curious because, if I keep the Settings window active, on the Bluetooth page, both the keyboard and the mouse work. If I minimize the Settings window, after about 30 seconds, both devices stop working. If I close the Settings window, or move to a different settings page, both devices stop working immediately.
I have changed the Bluetooth Support Service from Manual to Automatic, but it did not work. Running the Hardware and Devices Troubleshooter did not work either.
I have recently bought a dell xps 8700 and it worked great for about 3 days then the wifi would disconnect and not recognize any connections even though every other device in our house works perfectly. I am 100% certain it is an issue with the computer itself and not the wifi network i had to return the computer for a new one twice already and the issue has happened with every single one. i have tried updating the network and chipset drivers witch resolves the issue for about 2-3 days. what would cause the exact same issue to re appear on 3 separate products is beyond me. i am also aware of the issue with old vpn software from windows 8 but the computer came with windows 10.
View -1 RepliesI seem to be having a weird thing where my computer makes the dis/connect sound randomly but especially when I am gaming. There doesn't seem to be a loss in connectivity of my keyboard or mouse as I can still move around in the game.
I'm running a wireless mouse and separate wireless keyboard (i.e there are two receivers connected to my pc)
Also something else that is weird and may be to do with it, my gpu (970) is showing up in the "safely disconnect" menu in the bottom right of my taskbar.
Title says it all. After waking from sleep mode the computer disconnects from the internet and I have to reboot to get a connection. Makes the whole point of having a "sleep" mode useless. This is annoying because often I go away from m y computer for a few hours during the day and don't want to have to reboot to get back onto my computer. Rebooting wears out the components and is uneccessary when it should simply wake from sleep mode with no hassles. I have a wired connection via ethernet cable. My router is always switched on.
View 4 Replies