Possible To Safely Power Off Without Shutdown?
Sep 29, 2015
I'm using an Intel Compute Stick as a dedicated processor to remote-control some portable audio equipment. To assist portability, the power supplies for all the gear are to a single plug and it's all made to be turned off by simply "pulling the plug" (i.e. no shutdown process). The Compute Stick basically being a fully functional Windows 10 device, it is NOT made to be powered down by simply "pulling the plug."
It's somewhat annoying to have to reach in the rack to power up/down the Stick before I can move it, doubly annoying to have to sit there and wait for it to shutdown, especially if it *decides* it feels like doing some other kind of business before it gets around to my shutdown request. The annoyance factor is increased as there's no attached screen or HIDs to give confirmation that the shutdown request is pending.
So, my question is this: Is there any way to configure the Stick PC in a way that ensures it avoids the adverse effects of being powered down without a shutdown sequence?
View 1 Replies
Similar Messages:
Oct 5, 2015
few days ago I installed Windows 10 pro from Windows 7 ultimate. Since installation of Windows 10 my keyboard and mouse remain powered after shut down PC(lights on). I have never had this issue before on W7.
View 1 Replies
Sep 29, 2015
How to enable Sleep? Power only gives me Shutdown & Restart
View 7 Replies
Dec 24, 2015
Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.
Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.
This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.
View 9 Replies
Jan 28, 2016
I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:
Click Windows_Start_button > Power > Shutdown
The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.
I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.
View 4 Replies
Mar 15, 2016
There is no icon in the hidden icons area in Windows 10 that allows one to safely eject an SD drive. I have an SD drive inserted in my computer and have uploaded the files I want to upload and now I want to remove the SD card without corrupting or destroying the files on it. How does one do this safely?
View 4 Replies
Apr 14, 2016
Windows 10 OS using NVidia graphics and Realtek sound.This morning after a windows update ran , I have no sound. Troubleshooting shows that a solution maybe to reinstall 2 drivers from Realtek and NVidia. I tried the Auto fix solution but problem persists.On the Device Manager it is showing an orange warning triangle on both drivers, saying reinstall. Code 18. As I said the Auto update install does not rectify the problemCan I safely uninstall the drivers ? And then how do I reinstall them ?
View 4 Replies
Aug 20, 2015
Am I able to safely move my Windows 10 Install media to a different USB or do i have to download another copy of the installer
View 1 Replies
Aug 8, 2015
I have set my external hard drives to performance mode, and recognize the warning that I won't be able to simply unplug them. Basically, I have to use the little green safely remove hardware icon. Nothing new. In Windows 10 however, when an external drive is attached, and I go to eject it using the safely remove hardware, they are always grayed out and I'm unable to do so. Is there another setting I need to do, or is Windows 10 saying that even with the performance boxes checked, I can still remove drives without "safely removing them."
View 1 Replies
Aug 31, 2015
My account is 'Lenovo' all the others i never use, they're all empty.
I noticed the folders 'default.migrated' and 'UpdatusUser', i've never seen them before how do i remove them?
I'd also like to remove public and the hidden 'default' folder if it's possible?
Is it normal for it to say 'windows 8' when i have 10 installed?
View 7 Replies
Jan 10, 2016
Since going to Windows 10 my caps lock notification does not appear. I found this feature very useful and would like it back
View 2 Replies
Apr 5, 2016
I've only noticed it 'missing' in the last few days. How to get it back?
View 1 Replies
Jan 2, 2016
I have created Eject "N", etc for each drive letter from G-Z and they all work. They will safely remove my external HDDs. I have also created a context menu entry for Safely Remove > and it has a string value for subcommands, none of which will show when hovered upon. I need to move all of my Eject entries under the Safely Remove in order to keep my context menu clutter free.how to do this?
View 3 Replies
Jun 5, 2015
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
View 9 Replies
Feb 10, 2016
My taskbar shows that I can "Safely Remove Hardware and Eject Media". I don't have anything plugged in. Selecting the message tells me that I can "Eject Nvidia GTX 970". Wouldn't that be odd? It's the friggin' video card! I'm partly ready to select that option, just to see what the computer would do. Oh, that's right: without a video card, I wouldn't be able to see what the computer is doing..Why does Windows 10 think that my PCIe card, the only one that's been in this machine, the one that's been there BEFORE W10 came along, why does W10 want to eject my card?
View 3 Replies
Nov 15, 2015
I just upgraded to Windows 10 1511 (November Update), and saw the new (modernized) Safely Remove icon in the system tray - and the problem, it's not working properly.(I know, it's a Windows 7 Screenshot, I found it online, it's just for reference).As we can see from the comparison, mine only shows the second row, that being the device description (Name and drive letter), and no longer shows "Eject Storage Device".
So the safely remove icon in the system tray is now practically useless. I search over, and found no one with the same issue, nor did I find any direct fix. I shutdown and reboot a couple of times, tried different USB devices and ports, I also did try a couple of related tweaks, like changing the removal policy, and scan for hardware changes, etc - but still, no luck.Though note, the eject function is still available through file explorer:
View 1 Replies
Oct 8, 2015
Any way to hide it for good? Not disabling it, because that could cause some trouble, just that doesn't show in the tray? A .reg file would be awesome.
I want this for 2 reasons: First, I don't use it, I use USB Disk Ejector; and second because it's wasting space. And don't worry, everything in there has a purpose, as myself installed everyone of them.
View 5 Replies
Feb 10, 2016
I followed Brink's tutorial here: Shut Down Computer in Windows 10 And I saw that there are 2 ways to fully shutdown Windows through cmd: /s and /p. What is the difference between these 2, if both of them are said to perform a full shutdown?
View 3 Replies
Nov 28, 2015
I just received my MSI laptop with Windows 10 and I'm still feeling around on how to use the new OS (upgraded from Windows 7). I plugged in my ext. HDD and something popped up asking something along the lines of "What do you want to do with this?". I was like "Okay, everything's going fine so far."
The problem came when I wanted to eject my HDD though. I couldn't find the icon in the little notifications area with the arrow. I couldn't eject the HDD from "This PC" either. In the end, I just unplugged it, since there wasn't anything too important on it.
I've tried enabling "Quick Removal" in the device manager, but that checkbox doesn't even show up. Instead, it's replaced with the "Write-caching policy" options. I've also tried turning the notifications on in the taskbar, but that doesn't work either. I turned on task manager, safely eject..., and location, but none of them show up. I've restarted my computer as well.
View 7 Replies
Oct 6, 2015
Even without any flash drives connected to my PC, it still displays this. Didn't happen when I was back in Windows 7.
View 9 Replies
Nov 5, 2015
When I use the Safely Remove Hardware to remove, for example a USB flash drive, I do not get the notification that the device can be removed. I used to get this in Win 8.1 and I still get it in Win 7.
Is there a way to enable the message? (I know a lot of people don't want the message but I do).
View 3 Replies
Aug 18, 2015
Windows 10. I can't find the eject hardware icon anywhere. Under windows 7 it was in the system tray at bottom right.
1. So where is that eject hardware icon?
2. I'm assuming that mice and keyboards can be removed at any time safely as there is no data transfer. Is that correct?
View 7 Replies
Sep 11, 2015
This is something that recently just started happening. I click on the start button and click Shutdown and everything seems to go normally and the monitor goes black but the computer will not shutdown. The activity light continues to flash and after a few mins my PC just boots back up, almost like it was doing a reboot.
View 1 Replies
Aug 26, 2015
I am in a similar situation. Upgraded a self build PC from Windows 7 to 10. Now, I am unable to shutdown. I have turned off the Fast Startup, but it still reboots when I hit 'Shutdown'
View 2 Replies
Jan 31, 2016
when I shutdown win 10 it goes through the shutdown process the screen goes off but the PC keeps running for 3 to 5 minutes it didn't do this before it has just started in the last week.
View 2 Replies
Aug 19, 2015
Upgraded from Win 7 which ran as normal. But now under Win 10 Pro, both "Restart" and "Shutdown" produce a restart.I have reflashed to the last BIOS just in case but to no avail.
View 3 Replies
