My system: Win 10 64 bit Retail, MSI B150M Mortar, Intel i5-6500, Samsung 512GB SSD, Corsair 2 x 4 GB Memory, etc.
Although my keyboard and mouse are allowed to wake the PC from sleep (in Device Manager), they don't wake the PC. Interestingly, pressing the "Power Button" on my Fractal R5 case does wake it up from sleep.
After Windows 10 install, there is no "sleep" option on the "shut down" button or in the "power options". Any way that will enable my sleep options?
View 14 RepliesJust installed my Win 10 from Microsoft. All went well on the Venue 8 pro. Win 10 worked well with the Dell VN8P but if you put it to sleep by pressing the power button or it enters sleep itself after the time you set, it WILL NOT start back up when you press the power button. LED back light on but screen remains black.
You need to hold down the power button > 10 sec to shut down completely. The you can reboot and all works fine.
This was unacceptable for my use so for now I back out of Win 10 to Win 8.1 which works fine. Tried all kinds of Windows power settings and options. Nothing works.
My Dell desktop PC has been running Windows 10 since last Fall. About two weeks ago it began to have difficulty waking from sleep. Pressing the power button or a key on the keyboard causes the fan to come on and the hard drive to spin up, but the screen remains dark and in low-power mode. When I press a key the Caps Lock indicator lights up briefly.
I have to shut the PC down by a long press on the power button. When I reboot it, it starts up OK and in fact the previous set of running programs is reopened. I think this might be due to hybrid sleep: when I force a restart Windows reloads state from the hibernation file.
I've tried a couple of suggestions I found online, such as using System Restore to roll back. No improvement. Others have suggested changing the version of a device driver, such as the graphics driver, but my graphics driver is the same version it has been since installing W10.
Noticed a change in the behaviour of sleep in the last couple of weeks? I'm wondering if this is due to some update pushed by Windows Update.
I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:
Click Windows_Start_button > Power > Shutdown
The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.
I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.
So as the title says, every now and then Windows 10 randomly decides to wake itself up from sleep. It doesn't happen at any consistent time, some days it stays asleep until I actually turn the PC back on. Using powercfg /lastwake just gives me a wake history count and doesn't provide any information.
I can't figure out why this is happening. I've tried googling it and have found similar complaints but no real solution. It's not hardware that is waking it up and I have already disabled the "allow wake" setting for my network adapters in device manager.
i don't want my mouse or touch-pad to wake my laptop from sleep when it gets triggered, I have been to 'mouse settings' & unchecked the part about waking up PC' & i hit apply & OK but no good. Now the touch-pad wont wake it up but my bluetooth mouse still does it. I'm at a lost as to what other settings i missed or if its a bug somewhere.
View 3 RepliesUpgraded to Windows 10 and now the computer wakes itself from the sleep. I have already disabled network adapter, mouse and keyboard from waking the pc. I have also disabled scheduled tasks from being able to wake the computer.
View 1 RepliesPost W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
I've searched the board and found many similar problems to mine, but nothing exactly like it, and as such I haven't been able to fix it.
When put in sleep mode, my computer automatically wakes up at a set time.
I have disabled wake timers in the power menu, I have clicked of "allow [this device] to wake up the computer" on every applicable device (mouse, keyboard, HID-compliant device, NIC...)
Here's what the CMD-prompt says about armed devices:
As for the wake timers themselves:
since this a Windows process I can't just shut it down.I can't seem to find it in the Task scheduler though...
I did the w10 update fairly quickly when it was available. upgraded from windows 7 using their program. not fresh install. perhaps this is reason for weirdness.
My computer seems to be waking very often at odd times. using powercfg /lastwake i see one reason is:
"owner supplied reason: .../Media Center/mcupdate_scheduled"
My question: If media center was removed in w10 why does it still have a folder, and why are its pointless scheduled tasks still running? How do I remove these and other waking scheduled tasks?
Each morning when I wake up, my computer is on, rather than in sleep mode, as I left it. I have disabled the power of the mouse to wake it.
View 9 RepliesI installed Windows 10 right after it came out and have had very few problems but in just the last few days it stopped waking from sleep. The power light used to flash and it would wake from a mouse or keyboard button press but no longer. The system power will come on from a press of the power button but the screen remains blank. If I remove power from the system and then repower it and turn it on it will start the BIOS and re-boot to the state that it was in when I put it into sleep mode. Clearly the hibernate process is working but something is haywire with the wake process. How to troubleshoot?
View 2 RepliesSo I just installed a security program, and my windows 10 pc oddly goes to sleep and wakes back up instantly, twice. It seems like it stopped, but I would like to know if this should sound an alarm for any malicious activity.
View 5 RepliesI am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
I had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
View 3 RepliesTitle says it all. After waking from sleep mode the computer disconnects from the internet and I have to reboot to get a connection. Makes the whole point of having a "sleep" mode useless. This is annoying because often I go away from m y computer for a few hours during the day and don't want to have to reboot to get back onto my computer. Rebooting wears out the components and is uneccessary when it should simply wake from sleep mode with no hassles. I have a wired connection via ethernet cable. My router is always switched on.
View 4 RepliesWe have been using at home wireless logitech keyboard and mouse K270 and M505 respectively. All have worked great and have been using the unifying software. Since upgrading to Windows 10, I have been losing the pointer when my computer wakes from sleep or is unused for a length of time. Whilst I agree this definately looks like a window glitch. I have done all the usual things like refreshing drivers, new batteries etc.
View 1 RepliesMy motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.
I did the windows 10 upgrade, and all seems well, except waking from Standby.
If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.
But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.
I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.
Here is some investigating I did, hopefully it works:
Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?
I'm running my audio via HDMI from my graphics card and it plays through the speakers built into my monitor.
When I first did the Win 10 update I had no audio whatsoever, and followed some suggestions on online forums that lead me to disable the Realtek High Definition Audio which I did and upon a reboot- my HDMI audio was working.
But then I had another weird issue. My PC is set to never sleep as I use it as a media server, but my screens turn off automatically after 10 minutes. What im finding is that when I wake up my monitors the audio stops. When I view playback devices I can't do any tests because "the device is already in use by another application"
(note: I have the checkbox for allowing an application to take exclusive control of a device un-checked).
So far there are only 2 ways to restore audio. 1) restart the PC. 2) go into device manager > Sound, video and game controllers > AMD High Definition Audio Device > Disable... wait a few moments > Enable.
When I press the power button the pc won't shutdown.
By energy on configuration screen every thing stay good
I have a simple, generic keyboard that has Power / Sleep / Wake Up buttons right above Print Screen / Scroll Lock / Pause.
I want to disable them because I always shut down my computer accidentally and lose all my work.
All solutions I found are for windows 7 and are about tweaking in the Control PanelHardware and SoundPower OptionsEdit Plan Settings, where I can edit Advanced Power Settings.
However, that's the wrong thing to do because the "Power button and lid" section is not only for keyboard, it disables the computer case buttons as well which I normally use to shut down the PC. How I can disable those keyboard buttons in Win10?
Sometimes when I close my PC using the Windows 10 home menu the PC shuts down but when I later come back to open it I see that the physical power button is blinking as if it had only been sleeping and when I open the PC it goes straight to the login skipping the normal startup stuff.
View 1 RepliesI upgraded to Windows 10 from 7. Since the update I've run into an issue where, after I've been using my computer for a while and have done a few sleep/wake cycles, I won't be able to put my computer to sleep with the physical power button. It wakes up just fine with the power button. Restarting my computer temporarily resolves the issue.
View 9 RepliesIs there some way to create a power plan toggle similar to the brightness toggle when clicking on the battery in the notification area? My googling doesn't seem to come up with anything.
View 3 Replies
