RAID 0 SSDs Won't Boot
Mar 20, 2016
I bought two new SSDs to be used in a RAID 0 configuration with a Dell 9020 under Windows 10.
Before the drives I arrived I configured two old HDDs in RAID 0 and installed Windows 10 as a clean install. This worked perfectly.
Once the new SSDs arrived I configured these in RAID 0 and started a clean install. Windows correctly identified the disk with the correct capacity and the install completed without issue.
When the computer restarts I got a "A disk read error occurred" error.
If I boot from the installation media to a command prompt I can see that the Windows files have been correctly installed to the C drive of the RAID 0 array.
I also tried loading the RAID drive during Windows install but this made no difference, and if it was the driver causing the issue it would not have worked with my old HDDs.
If I open diskpart I see that the drive is not marked as boot, which it is when I check these details on the old HDDs in RAID0.
View 1 Replies
Similar Messages:
May 26, 2015
I want to purchase a copy of Windows 10 Pro. I currently own Windows 7 Ultimate. I do not want to lose Windows 7 Ultimate because I have games and other files that I am concerned will be incompatible with Windows 10 in the same way that they are incompatible with Windows 8.
My system specs:
Intel Core i7-4790K
Asus ROG Maximus VII HERO
Club3D R9 290
Samsung 840 EVO 250GB SSD
Western Digital Black 1TB WD1003FZEX
Asus DRW-24B1ST DVD-RW
G.Skill Trident X DDR3-1600 CL7
The 840 EVO has Windows 7 Ultimate installed on it. There are many basic programs installed to this drive, such as Microsoft Office, my Daemon Tools, Fraps, and other "mission-critical" things that I want to access quickly and reliably.
My mass storage drive is the Western Digital Black drive. All my games are stored there, as Steam has a folder it reads most of its games from. A few other large programs are stored there. It only has one partition.
What I've been thinking of doing is when Windows 10 comes out, I want to grab a 256GB Samsung SM951 M.2 drive for my Maximus VII Hero and install Windows 10 onto that. I'm hoping that way, I can access my games via either Windows 7 or Windows 10, so that if there's compatibility issues, I can boot to either Windows 7 or Windows 10 and not have to worry about being able to play my games. I don't really want to do the free upgrade path because I'm concerned that it will replace Windows 7. I don't want that.
I'm also wondering if I can still run the games on the WD Black from Windows 10 using Steam launching from the SM951, as I currently do with Windows 7 on the 840 EVO.
I'm pretty certain that I won't be able to access Microsoft Office, which is on the 840 EVO imbedded into Windows 7's Program files. Or will I?
View 1 Replies
Sep 6, 2015
I have 2 ssd drives and one mechanical for back up.
Currently I have windows 10 installed on one SSD and nothing on the second. I have cloned the SSD with OS onto the mechanical and I am trying to boot to it and format both SSD drives so I can pool them into a single storage drive with the new windows 10 utility.
I have changed my boot order in the bios to boot from the mechanical drive but windows will not let me delete/format the SSD that I originally installed the OS onto.
View 1 Replies
Sep 22, 2015
My current hard drive is failing and, since I have two brand new identical hard drives lying around, I decided to do a RAID 0 set-up. I went into the BIOS and set SATA 1-4 as RAID and 5-6 as IDE. I left the Raid ROM as Legacy. I then went into the RAID set-up and turned both hdds into a RAID 0. I then inserted my usb stick with Windows 10 and started the installation process. The installer saw the raid without any issues, installed windows, and then rebooted. Unfortunately, it was at this time the error in the title appeared. No matter what I did, it would not stop producing the error. Even attempting to boot to my previous hdd (which was not included in the raid set), would produce the same error. The only way to stop it was to turn off the raid and completely remove all of the raid set partitions. This allowed me to boot into my old drive at least.
Specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-812034 °C Zambezi 32nm Technology
RAM 32.0GB Dual-Channel DDR3 @ 2400MHz (11-11-11-28)
Motherboard ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)28 °C
Graphics G276HL (1920x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA)28 °C
Storage
465GB Seagate ST9500325AS (SATA)26 °C
1397GB Western Digital WDC WD15EARS-00Z5B1 (SATA)33 °C
465GB Seagate ST9500325AS (SATA)24 °C
298GB Seagate ST3320620AS (SATA)32 °C
232GB Maxtor 6L250S0 (SATA)35 °C
7GB Memorex TRAVELDRIVE 005B USB Device (USB)
Optical Drives HL-DT-ST BD-RE WH12LS30
View 1 Replies
Oct 8, 2015
I am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
View 9 Replies
Dec 2, 2015
So at first, I was trying to resolve an issue with my BD-ROM drive described here: XPS 8700 - BD-ROM (HL-DT-ST DVDRW/BDROM CH20N) Not Recognized Windows 10 - Disk Drives (HDD, CD/DVD, Blu-ray) Forum - Disk Drives - Dell Community
However, when attempting to try different things, I am now in a position where I can no longer boot to Windows 10. More specifically, when I turn on my computer, I get an error saying no bootable drives found and it just lists my SATA 1, 2, 3, etc. drives with an option to restart or go to BIOS setup. In other words, I don't even see Windows anymore existing.
My basic computer specs:
Dell XPS 8700 SE
Intel Core i7-4700
Windows 10 with 1511 update
2TB hdd with 32GB mSATA SSD cache drive
16GB RAM
BD-ROM
I need to get Windows working again, and hopefully, get back my data. Here's what I did to cause the problems:
1) I went to Dell UEFI BIOS setup, and changed the SATA mode from "RAID" to "AHCI". Saved and exited BIOS.
2) After rebooting, Windows failed to load, had a consistent blue screen with the sad smiley face with error "IO1_INITIALIZATION_FAILED", automatic repair also failed.
3) I tried reverting back to "RAID" in SATA mode in BIOS, but it failed to change anything. Windows still wouldn't boot
4) I then entered into the special BIOS menu showing devices which listed my mSATA cache drive and hard drive and RAID settings. Since it showed that the cache drive was "Disabled", I thought I could fix my issues by re-creating the RAID array.
5) I tried to delete the current RAID setup shown in that BIOS menu, then chose the option to recreate the RAID0 array by selecting the option to create a "Striped Disk Array".
6) Once I did the above, Windows itself disappeared, and trying to undo the RAID0 option did not fix anything
So now I am no longer seeing Windows, not sure if my data on the hard drive still exists, and my cache drive (obviously) is not working.
doing a clean reinstall and losing all my previous data in Windows?
View 9 Replies
Sep 17, 2015
I have recently purchased a new laptop, one that houses a rather small SSD. As well, it comes with Win 8.1 and I am quite eager to migrate to Win 10 as soon as I can (or at least as soon as the first Service Pack is released). A new SSD has been purchased and is intended to be installed right away.
From what I gather on the forums, would the following be the best way to upgrade to Win 10 on my new SSD?:
1. Launch the brand new laptop and immediately begin cloning the old SSD onto the new SSD using Win 8.1.
2. Install the new SSD, which now has Win 8.1.
3. Upgrade to Win 10 with the new SSD.
I'll then go about doing a clean install.
View 1 Replies
Sep 1, 2015
I am building a new PC with no internal storage. I am installing a 2.5" SATA dock in one 3.5" bay and one 3.5" SATA dock in a second 5.25" bay.
My intention is to have one SSD for my work PC on Windows 10, one SSD for my son for his gaming on Windows 7 (some of his games are not Win 10 compatible yet), and perhaps a third SSD for playing around with Linux installs, etc.
The 3.5" dock will have a 1TB HDD for backup.
From what I have read, since these drives will not technically be external. (plugged into the SATA on the mainboard through the dock, and not via USB or e-sata.), that their creation and use could be problematic if I use the UEFI boot system, or secure boot for that matter.
So.... I am looking for a methodology which I should use to setup these boot SSDs which will give me the least problems and management issues.
A side related question. I have a boot SSD with Win 7 home premium that is eligible for Win 10 upgrade. It currently resides in my Dell Alienware x-51 R1 system, but I want to move it to the new system as the drive my son will be using.
Will there be any issues in moving the drive to a new system architecture?If/when he can upgrade to Win 10, will there be any issues with that since the architecture has changed from the system of origin?Do I need to backup/reformat/restore the drive in order to get it to boot properly in the above mentioned docking bay system?Since only one drive could be used at any one time. In your opinion, do you think I need multiple Windows Licenses?
View 2 Replies
Jan 25, 2016
Okay. I have been doing a lot of cloning and migrating an OS before but I haven't done cloning or migrating an OS from dual drives in RAID 0 mode.
It's not my PC. Is it a different approach or is it just like working on a single drive? Can Macrium handle this?
Btw, I know clean install is the best way to go, but I was told by the PC owner that she can't afford to install all her programs back due to time issues, etc.
View 9 Replies
Dec 19, 2015
I have an ssd and I want to get another to configure it in raid zero for faster pc but I have already installed windows 10 on one, is there a way I can configure it in raid zero without having to reinstall windows?
View 5 Replies
Jul 31, 2015
I currently have Windows 10 installed on a Raid 0 of Two Samsung 840 Evo's. Because of a change in the way I am using the PC I need to disable the raid and leave them as separate drives.
The reason I am concerned is that windows 10 is bound to your Hardware, not you. So for me to reinstall windows after disabling raid would I need a new copy or would just installing windows 10 again work?
Alternately if I was to re-install windows 8.1 on my machine after disabling raid. Would I then be able to do the upgrade again and get windows 10 that way?
View 1 Replies
Nov 13, 2015
So I know very little about raid configurations and how to set them up. I have just finished building my pc and everything is working great, however what about the raid configuration my 500gb ssd and 1 tb hdd have been set up in.
I am therefore wondering a) how to find how my storage has been set up, b) which raid configuration to go for and c) how to set it up.
I was thinking of having the ssd and hdd already installed acting as two different drives. i have put windows 10 and all the programmes on to the ssd and would like the hdd to be seen as if it were a usb stick (I think that is what it is at the moment as under this pc the ssd and hdd show as different drives). Then have those two drives mirrored to a single 2 tb hdd.
I have heard about raid 5 but from what i have read this spreads the data across multiple drives and the drives used have to be the same size and so wont work how I would like them to.
View 1 Replies
Jan 30, 2016
I have Windows 10 Pro installed on an SSD in AHCI mode.
I would like to add a RAID 1 array to this system for storage but I understand some registry tweaks must be made before I can change my BIOS from AHCI to RAID mode or I'll end up hosing Windows.
I've read that the edits for older Windows at [URL] do not apply to Windows 10. know the registry edits that work for Windows 10?
View 3 Replies
Feb 10, 2016
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
View 5 Replies
Oct 19, 2015
I have a PC with Asus Z97-Pro mb. OS (W10) is on SSD. Two SATA HDD's (each 1 TB) contain dissimilar data. Can I add a third SATA drive (1TB) and create a RAID-1 configuration with only one of the two existing drives? The mb manual says that when SATA ports are set to RAID mode, all SATA ports run at RAID mode together. Does this mean that I cannot do what I am asking?
View 1 Replies
Aug 6, 2015
A small server setup by a linux programmer who is no longer available and support is non-existant failed after an automatic update left the machine unreachable from the LAN. Samba crashed and I now have 2 RAID arrays formatted NTFS that have thousands of files. I am going to install Windows 10 Pro on it. Will I be able to recover the data on the two RAID arrays?
View 1 Replies
Aug 20, 2015
When I built my PC I only got a 250gb ssd, figuring that it would be enough for the time being. I have been having issues with what to keep and what to get rid of on there.Is there a way to convert my (C drive to raid 0 keeping everything installed or will I have to format and reinstall everything. Also, could I do the same with my 1Tb secondary drive so I won't have to re-download everything as I have a slow internet connection.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Jul 30, 2015
I have a PC with Asus P9X79 Deluxe motherboard. It has Intel chipset and Intel BIOS RAID (RSTe) and 6 SATA ports connected to it. The chipset IDE controller lists in Linux as:
Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06),
and the PCI ID is:
0104: 8086:2826 (rev 06).
My RAID configuration is 2xOCZ-VERTEX4 256GB SSD's in RAID0, as boot drive (C: drive), and 2 (quite old) WDC WD2500KS 250GB disks in RAID0 for extra storage (games, movies etc) (J: drive).
So yesterday I decided to upgrade my Windows 7 Ultimate to Windows 10 Pro. All seemingly went well during the upgrade process, and the system booted fine, and most stuff seemed to work as it should. But after a while when I accessed files on the J: drive I started experiencing random (temporary) freezes.
Then after a while it got more serious and the whole system froze, I had to hit the reset button.
So I rebooted and looked in the event log, I get see tons of errors there saying that the disk has a bad sector.
Then I try using the J-drive again, by viewing some videos there, and it works fine, but after a while there are some freezes and then I see in the event log, that the drive was reset. After this it works again for a while but then another of those resets comes, and freezes everything for a short while (like 30 seconds).
But when I try to copy some large files off the J-drive, another reset comes, and then the event log starts showing a lot of the error messages from before, with "the disk has an bad sector". (I will post screenshots of these errors after I reboot back into Windows).
After this I can't access the J-drive at all, and Windows gives me error messages when I try to.
So, I figure that I might have just got unlucky and the old WDC drive actually developed read errors, although it's strange that it happens exactly when I install Windows 10 (these drives are something like 7 years old).
Well I can't copy the contents off the disk from Windows since it keeps failing as described above, so I boot into Ubuntu Linux from a USB stick, so I can use ntfsclone to image the J-drive to another disk. I start it running expecting that I'll start seeing read errors, but to my surprise there are NONE. It also copies all files off the J-drive without any problems from inside Linux!
So it was after all not the old drive that had failed, but instead Windows 10/Intel had failed me in a big way.
I trawled the web for updated Intel chipset drivers and installed those from the Asus site, but it made no difference at all. I couldn't find any other Intel drivers and when I searched for the RST drivers on Intel's own site, I could only find ones for Windows XP upto Windows 8.1, but none for Windows 10.
For now I'm left with a PC that I can't use, because I can't go back to Windows 7 and Windows 10 is not working with my RAID arrays. I got some spare 2TB disks, and I'm right now copying all the data from the old J-drive (the RAID1 about 500GB) over to this, hopefully I can then work in Win 10, but I am VERY concerned because the same RAID and drivers are used for my master boot drive with the two OCZ SSD's.
View 9 Replies
Feb 10, 2016
Trying to restore an image on to a RAID 0 SSD from stand alone version.
After loading the RAID driver Macrium SEES all the HDD's and can select images etc.
However when TARGET destination is chosen No HDD's are seen. !!!
Need fixing this --otherwise this backup software becomes USELESS !!!!.
Macrium --latest version.
View 5 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Nov 10, 2015
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
View 1 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Feb 2, 2016
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
View 3 Replies
Apr 29, 2015
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
View 9 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
