Re-installing OS For A New Motherboard?
Oct 28, 2015
I've been planning on swapping out my motherboard for a new one. I've looked around and it has come to my attention that i would need to reinstall my Operating System. But it wasn't mine and i no longer have contact with the friend that let me use it. my question is, do I need the Disk that i used to install it? or any sort of key? and if so, are there any alternatives to get it cheaper? (my os is windows 10 and i used to have windows 7 before i upgraded)
View 1 Replies
Similar Messages:
Nov 21, 2015
So I am going to upgrade from an a8-7600 apu to possibly an AMD 6 core cpu which will require a new motherboard since its an am3+ Ok so since I need to change motherboards and on this current pc i am on i upgraded my windows 7 to windows 10 does that mean I cannot use this copy of windows 10 when i change my mobo and cpu? I would have to buy a new copy of windows basically?
View 1 Replies
Aug 9, 2015
I'm just wondering, once i upgrade my OS to windows 10, does that upgrade bind to my current motherboard and will only work with the motherboard it has been upgraded on only. I am asking this cause i am planning to upgrade these days, but i also have plans to upgrade my cpu during the next year which will ultimately require a new motherboard. So i just want to know if i can upgrade without worrying that once i change my motherboard that the OS will become invalid and that i will need a new one.
View 1 Replies
Sep 26, 2015
As the question says. I want to upgrade my motherboard & CPU. Recently I got windows 10 update for free. & I heard that significant hardware change can deactivate windows. I don't want to go back to windows 8...
View 1 Replies
Jan 10, 2016
So after some recent hardware problems I had to replace my mother board. I bought a different model than the one I had previously. I had previously installed a copy of Windows 7 and had it activated by a man on Craigslist who I assume had a membership or something because the key was legit. I later upgraded to Windows 10.
Now my computer is fixed and Windows 10 is installed but it will not activated because the OS considers this motherboard a "new device."Also, I do NOT have a key for any version of Windows and I would really rather not spend 100 dollars buying another copy.
View 1 Replies
Jan 6, 2016
I am building my first computer with windows 10 64-bit and I can't find the usb 3.0 drivers for my motherboard. Do the usb 3.0 drivers come with windows 10? here is my motherboard and the available drivers from asrock for my motherboard, I see everything except usb 3.0 drivers. URL...
View 1 Replies
Dec 30, 2015
I've clean installed windows, reinstalled all my drivers, and reset the bios but my computer is still performing slow. I went from a MSI FM2-A75MA-E35 motherboard to a MSI A55M-E35 one and from Corsair Vengeance 8 GB (2 x 4 GB) CMZ8GX3M2A1600C9 to Crucial Ballistix Sport 8GB (1 x 8 GB) BLS8G3D1609DS1S00. I don't believe there should have been much of a performance change because of the hardware so I'm thinking I probably did something wrong.
View 1 Replies
Oct 27, 2015
I don't really know whats going on but I wiped my old system, re installed win 7 and then upgraded to win 10 and now my oc motherboard bundle keeps failing. I can use the computer for 10 to 20 mins and then it powers itself down resets and comes up with a message saying the settings have failed, if I re load the profile and reboot the comp will work until I turn it off for the night and then the same problem following day.
The bundle worked fine since I purchased it at the beginning of the year and is oc through bios by overclockers uk so I thought it didn't make any difference what os I used....
breeze msi z97 intel i5 4690k @ 4.2 overclock bundle
16G Ram
Zotac 780ti sli
500gb Samsung ssd
win 10 64 bit
View 1 Replies
Feb 8, 2016
I currently have an MSI board with B150m chipset. I am changing it to Z170m from MSI. I have windows 10 and Ubuntu 15.10 installed in dual boot mode. If I change the board, would everything work fine? Would I need to do anything before?
View 1 Replies
Aug 9, 2015
For the last 2 months since I got my new PC, I have been using my TV as a monitor for my PC. I had a few issues with resolution due to my TV overscanning the display but I used the resize feature in the NVidia control panel. However, yesterday when I downloaded Windows 10, it installed fine but when my computer opened up again it was trying to use my TV's native resolution which was a problem because of the overscanning. So I went to the NVidia control panel, and when I clicked the resize button (before choosing the new resolution) the TV just said it was receiving no input. Whenever I then tried booting my PC, it would display to my TV until Windows had loaded, then it would say no input.
The same thing happened when I connected to the TV through my motherboard rather than my GPU. So I spent ages trying to get it to work and eventually connected it to an old monitor. However the monitor only has a DVI input slot, which my GPU doesn't have, so I had to connect it through my motherboard and it worked fine. I then uninstalled all NVidia stuff from my computer, including the gpu from my device manager, and manually installed the new GTX 970 windows 10 driver from their website.
When this was done, I connected my graphics card to the tv through the HDMI, keeping the computer connected to the monitor through the motherboard. Both displays then worked as a dual display setup. However, even now whenever I try booting up my PC with only my gpu connected to the TV the same thing happens that was happening before and the TV will only display through the GPU when the motherboard is also connected to the monitor. I have ordered a DVI to HDMI cable so I can attach my monitor directly to the GPU, which will hopefully work, and then I will stop using my TV, but I would rather fix this problem and carry on using the TV until I can buy a better monitor.
View 1 Replies
Sep 6, 2015
So apparently I need to update my chipset drivers because USBPORT.sys is causing DCP latency. How do I do this? Also is it risky like changing a bios? Will I need to backup/ reinstall?
View 1 Replies
Dec 6, 2015
I am currently running Windows 10 upgraded from Windows 8.1 Pro retail. Here's the deal: I am upgrading my system to Skylake, so obviously that means a new motherboard. I know if I want to directly install Win10, I have to get a new license ; but if I just reinstall my Win8.1, will I be able to perform the upgrade again ?
View 1 Replies
Aug 16, 2015
I have a strange issue where after a full shut down in Windows 10, the motherboard is still delivering power to my connected devices such as my headset, keyboard, mouse and monitors i.e. all the lights on these devices are still on, whereas previously in Win7 they would all turn off.
I did an in-place upgrade from Win7-Win10 and adjusted no motherboard BIOS settings.
I've looked through the Win10 power options and can;t see anything relating to keeping devices on after a shut down. I assume this is so USB devices like phones and tablets can charge from USB when the PC is off? However I don;t need this feature if that's the intention.
Is windows 10 (vs win7) sending a different command back to the MB on a shutdown?
Hardware:
MB: Asrock P67 Extreme 6
CPU: Intel 2600k
View 6 Replies
Sep 23, 2015
BIOS Version/Date Phoenix Technologies, LTD ASUS M2N-E SLI ACPI BIOS Revision 0801, 25/04/2007.This is an older MB and I have installed Windows 10 as a fresh install now and its running nicely.would I be able in the future to install windows via a USB Stick as there's no option in the BIOS as a first boot device.This is in case I ever have a situation where I can't get back into Windows and need to reinstall my OS.
View 2 Replies
Feb 20, 2016
I had a pc failure, so i upgraded my motherboard and chip, as expected windows still booted from start with no issues, restarted to install lan driver, and when it fired up again i had the activate windows bottom right of screen, how do i fix this, I upgraded from win7.
View 10 Replies
Oct 25, 2015
Just upgraded to an MSI 970 motherboard and now windows 10 pro is giving me an activation error code along with a water mark in the right corner. I did the free upgrade from windows 8.1 pro to windows 10 pro back in late August.
Do I have to revert back to 8.1 pro now? Thought windows 10 was free for a year.
View 1 Replies
Jul 29, 2015
Just installed windows 10. Everything is working good but there's problem with the sound. Sound driver is installed too but there's no sound output. I have installed the audio driver like 10 times and tried different versions as well but no result
View 1 Replies
Sep 13, 2015
So my original motherboard (a G45 express chipset from 2007~) doesn't support overclocking, only supports LGA 775, and has a maximum of 300W. It needs replacing pronto. The thing is, the windows is a OEM copy, so the key is bound to the motherboard. Now I heard that if you phone up Microsoft and tell them that the old motherboard broke, and you bought a new one and now windows wont work, they often just give you a new code and disable your old code?
Will this still work in the windows 10 era? As soon as the old windows key is disabled will my current windows install just break? URL... So I just read that you swap the boards, install windows, and wait until it asks for the key
View 1 Replies
Aug 27, 2015
I am gonna upgrade my pc very soon and I am gonna switch pretty much everything except my hard drive. I am aware that I will have to re-install windows so I am gonna buy windows 10 home 64bit.
is it possible to upgrade my windows so I will keep all my files. I already have windows 8.1 on it so why wouldn't it work?
View 1 Replies
Sep 5, 2015
Do I really need to re-install 8.1 to see if it's a software issue? Because before I went to 10, it worked fine. But now in speccy and OpenHardwareMonitor, I am unable to get a reading.
View 5 Replies
Jan 9, 2016
The PC freezes at random times. The GPU is EVGA GTX760 with i7-5930k CPU
View 7 Replies
Feb 23, 2016
I just switched to a new motherboard, its an ASRock H97M-ITX/ac. Before I turned off my pc with the old motherboard I uninstalled some devices like the IDE controllers, network adapters, and sound. Then I installed the new motherboard, turned on the pc and noticed right away it was very slow but after a few restarts and installing the new motherboard's drivers it was somewhat faster but I could tell that it still wasnt right. I ran a benchmark on my ssd and got what I think is a really bad result:
Sequential Read (Q= 32,T= 1) : 19.763 MB/s
Sequential Write (Q= 32,T= 1) : 12.059 MB/s
Random Read 4KiB (Q= 32,T= 1) : 6.253 MB/s [ 1526.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 5.544 MB/s [ 1353.5 IOPS]
Sequential Read (T= 1) : 17.194 MB/s
Sequential Write (T= 1) : 11.953 MB/s
Random Read 4KiB (Q= 1,T= 1) : 2.197 MB/s [ 536.4 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 3.296 MB/s [ 804.7 IOPS]
I'm pretty sure this is terrible for a SSD. So I guess I did something wrong. I'm prepared to reinstall Windows, but thought I'd check in here first because it would save some time if I could just fix my current Windows installation. Obviously a clean install would be best but the time involved in getting everything set up again!
View 3 Replies
Nov 6, 2015
I just put a new RAM, 2GB, on my computer, and when I turned it on, it worked nice for about 3 minutes. Then it suddenly froze compltely with nothing responding. First Firefox, then My Computer window, then everything, all this in about 10s. After another 20s, blue screen showing "critical process died" showed up. I managed to see that out of 4GB that I now had, 3,25 were usable (I thought W10 x32 supports 4GB?). I am uploading a report. I am almost aboslutely certain that this had something to do with the new RAM since before that it worked just fine, and now fine again after I removed the new one.
View 3 Replies
Jul 30, 2015
"What this error means is, your Windows 10 installation folder is unfinished and/or corrupted. Now, how do you fix that?
1. Go into "C:WindowsSoftwareDistributionDownload" and delete everything in that folder.
2. Now, run the command prompt as an administrator. Type in "wuauclt.exe /updatenow".
3. Go to your Control Panel > Windows Update and your Windows 10 should start re-downloading from scratch, hopefully without flaws this time.
I followed the steps exactly, twice and it still doesnt work.On another site they told me to go to URL... and download a program. Whenever i run the program it simply says "Something Happened" and closes.
View 1 Replies
Nov 14, 2015
After I installed TH2 on Thursday I decided to run a SFC check to see if I had errors and it came up with some that it said it couldn't correct. The assembly look at the attached file and tell me what I need to do.
Attached Files : CBS.zip 161.41KB
View 12 Replies
Jul 18, 2015
Is it at all possible to take the OS, already installed, from your PC and put it onto a USB? I plan on getting Windows 10, but want to be able to revert to Windows 7 if I don't like it. (I don't have the computers disks, as it was a hand-me-down birthday present from my older sister.)
View 1 Replies
