Reboot Process For Latest Update Stuck At 40%
Nov 12, 2015
So after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
View 7 Replies
Similar Messages:
Aug 30, 2015
I've been trying to update my windows 8.1 to Windows 10 for at least 10 times now and it always stuck at around 60% It reboots itself a few times and it always comes back to the circle screen with the % progress but getting around 60% it reboots and it gets stuck there... black screen, no cursor, no sound.
I've tried to plug it into a secondary screen thru hdmi but nothings happens; also I've uninstalled my antivirus since I've read it might be the problem but it didn't work..
I've got a Dell Inspiron 7537 Windows 8.1 x64 Intel Core i7, 8gb ram, Intel HD Graphics 2gb + Nvidia Geforce
View 1 Replies
Aug 23, 2015
I recently received the Windows 10 download on a desktop PC. The installation seemed to be going swimmingly however desktop suddenly powered off. Upon reboot, I'm stuck in a vicious failure loop. I tried to restore to no avail and tried to boot Windows 7 from a physical disk, but no matter what I try it appears my desktop PC is history. It ran Windows 7 just fine. I really wish I hadn't pushed my luck with Windows 10.
View 1 Replies
Jun 19, 2015
I chose the "fast" ring update on the windows insider app in order to get the preview for windows 10 on my lumia 1520. It updated fine but since the migrating data process began, it has been stuck in a continuous reboot loop. The screen shows the nokia logo and the windows logo briefly, then shows the at&t logo (since I bought the phone in the US) with "not for resale" written in the bottom left corner. How can I fix this? I don't mind losing all my data.
View 3 Replies
Oct 10, 2015
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
View 1 Replies
Dec 8, 2015
I am one of pioneer users of windows 10. Now I was suggested to upgrade to PRO version. Trying to do so the process was very long and was stuck at 47% of it...after few hours switched off my PC. Lucky after 5 min computer managed to restore my last version....I didn't give up and after few hours tried again and reached same point of 47% done..
View 9 Replies
Nov 22, 2015
I recently did a reset on my Windows 10 laptop and it reset to version 10240. I am not being prompted to update to the latest version via Windows Update. How do I trigger the update to send TH2?
View 9 Replies
Jan 27, 2016
After installing the early January updates, I can no longer mount/linkto/attach my two NAS drives. They are connected through the same switch that my PC is on. I have updated the NAS firmware with reboot, and restarted the switch.
The Advanced Sharing Settings are set to "ON".
NB the volumes are mountable from my Mac under Yosemite.
View 2 Replies
Nov 17, 2015
My computer (a 2 in 1 HP) has been frozen over night at 40% during the latest update. What can I do?
View 2 Replies
Jul 12, 2015
I'm in a lurch on 10162. I haven't received an email to update to 66, and windows is telling I'm up to date. My friend got 10166 installed, and he's having an issue with resolutions, so I'm trying to install now.
View 1 Replies
Dec 28, 2015
After the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
View 5 Replies
Oct 26, 2015
The latest update changed a lot of my settings, like my mouse sensitivity, along with resetting my background to its default image and resetting my task bar to default. My biggest issue is that it deleted all my pictures in the "Pictures" folder. if they put them in the cloud? Or am I just fucked and have to go down to the head developers house and chuck eggs at it.
View 5 Replies
Nov 19, 2015
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
View 9 Replies
Nov 15, 2015
OK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
View 1 Replies
Jan 13, 2016
after applying the latest cumulative updates IE11 is now broken on my system (W10 pro X-64)..Often the Main (home page) of a site works but as soon as you link to other links in the site garbled text often appears.Here's an example from BBC website. Main news page opens but link to a story and One can partly fix by pressing F12 and setting IE compatibility to IE10 or IE9.
View 4 Replies
Oct 25, 2015
My laptop did an automatic Windows 10 update Friday and restarted but no program will open now and I have to hold the on key to restart it. I get about 15-30 second after it comes up to click on something and it might open but will stop responding shortly after. I have got task manger to open once and only AVG was running but it frozen before I could click on anything.
I started in safe mode and removed the last window updates only to had them reinstall when it restarted.
What at can I do? Is this a virus or malware or did the latest update do this?
View 5 Replies
Jan 21, 2016
Start > Power > Shutdown did not anymore shutdown the PC... I had to do reset and restart Window 10 again. What can be done ? Command mode shutdown ?
View 7 Replies
Nov 25, 2015
Updated to the latest 10 update last night and Edge is almost unuseable. Takes about 5-10 minutes for the computer (esp Edge) to unfreeze and start playing nice.
View 6 Replies
Aug 20, 2015
I have a Similar problem in which I cannot install the latest windows 10 update I get to 75 percent and then it says it can’t continue and resets.
My computer is a Windows 7 machine upgraded to Windows 10.
I have ran sacs scan and it found corrupt files. Done all the other scans that you have suggested and I did get that source/image is repairable.
Tried all the Command prompts DIM/Online and that would not work either.
Using Microsoft media creation I re download windows 10 Is Mounted it do a dad and pointed the DIM online source to F: it also says that source fills could not be found.
I have even tried to reset Windows 10 but that encounters problems as well
I have even tried to reset windows through ISO and that encounters problems as well.
View 1 Replies
Aug 11, 2015
During the installation in Windows 10 crashes 25% ( I have a PC with windows 7 and I have the upgrade to Windows 10 with a reservation ). It is already the third time that I try to update it always crashes on 25 % ..
View 1 Replies
Jul 30, 2015
I upgraded to win 10 today from 7. After rebooting my screen now shows windows wallpaper (one of their scenic view wallpaper) as I had a custom picture and it displays the date and time in the left corner. See attached picture. I have no cursor and the keyboard doesn't work. The keyboard and mouse light up like their connected properly but they don't work. Ctrl Alt Del does not work.
I've plugged them into other USB ports but I get the same result. I've booted into bios and the mouse and the keyboard work there. I've rebooted dozens of times to the same result. I also downloading the media creation tool to a USB drive and tried booting from that and repairing the OS but no result...
View 4 Replies
Dec 18, 2015
Exactly as it says on the title. When I power it on, the GPU fans go full blast, it stays that way for a little while and shuts down automatically. There's no splash screens or anything either so I can't go into safe mode. Sometimes it shuts down almost immediately and then starts up again by itself. Sometimes it seems to start fine, the fans spin at their usual speed, but nothing appears on the monitor and eventually it just shuts down again, it's not properly booting up though because my drawing tablet's lights don't go on when I plug it in.
All this after the latest update. I restarted the thing so it would install the updates, but it got stuck on "Restarting" screen with the dot things spinning. I left it for several hours until I forced the shutdown and it has done this stuff since. I do recall the task manager not starting up from the security screen though.
What I've attempted so far:
Taken the battery and power cable off and held the power button for atleast 2 minutes.
Taken the second graphics card off. And reset the battery again.
Left it overnight like that to see if it would actually do anything (As if).
Started it up without the battery.
Tried to get into safe mode, nope.
View 3 Replies
Nov 22, 2015
Ever since I installed the latest "service pack" of Windows 10, my start menu doesn't work and my battery doesn't charge. I've found work around for the start menu creating links on my desktop to my personal start menu and the all users start menu. For now, I just need to leave my computer plugged in. I've fixed the plugged in not charging in the past. But in the past, I've always had a laptop that has a removable battery. This laptop doesn't. But since all this is due to the major upgrade of 10, seems like there has to be a simple or common fix.
View 4 Replies
Oct 11, 2015
Issue:
Track Pad Fingers 2 fingers Scrolling issue after latest Win 10 Update.
Just after a Win 10 update for 'Asus Smart Gesture', the two finger scrolling is not working any more.
Event logs below:
Faulting application name: check_os.exe, version: 1.0.1.1, time stamp: 0x54c88609
Faulting module name: check_os.exe, version: 1.0.1.1, time stamp: 0x54c88609
Exception code: 0xc0000005
Fault offset: 0x0000108b
Faulting process ID: 0xde4
Faulting application start time: 0x01d10426346ae5df
Faulting application path: C:Program Files (x86)ASUSASUS Smart Gesturecheck_os.exe
Faulting module path: C:Program Files (x86)ASUSASUS Smart Gesturecheck_os.exe
Report ID: b8f66c9d-5d72-4531-9ed6-b508433d087b
Faulting package full name:
Faulting package-relative application ID:
Troubleshooting steps:
Uninstalled
Restarted the system
Fresh Installed latest version Asus Smart Gesture, but no go. Still exact same issue as above.
Expectation:
I am expecting to be able to have the two fingers scrolling running as before. More so that it was working and now not since last update from Windows 10 for Smart Gesture Asus. Not having the two fingers scrolling is really tough.
View 5 Replies
Oct 16, 2015
Windows sometimes update at inopportune or bad times.. Example: Today I was backing up files and the processed stopped for a noticeable time. I could not restart the process or shut the process down so I tried to restart the computer and that would not work so I had to turn off the computer to restart it. Problem was that the computer was in the middle of downloading and installing updates without my knowledge. It took awhile for the installing to complete. Is there a way to control this process.
View 2 Replies
Nov 6, 2015
I've been having this issue with Java Update Scheduler running on his own and ramming my CPU usage to 80%, 10 to 15 minutes every time after I boot the PC, and every time I need to manually close it. I've searched it up online and people recommended setting s manual task scheduler for it, I did, it didn't work .
Some people recommended disabling "check for updates" in the Java configure window but I didn't even have Java installed, where this came from and how that process starts and why. So I installed Java, disabled updates and I still get this issue every time I boot the PC, I officially give up since I don't know what to do anymore.
View 6 Replies
