Every time I fire up my laptop without exception I cannot connect to the internet via WiFi.
Power settings are High Performance and the operating system doesn't switch off anything to save power. I never hibernate or allow sleep. It's either on or off.
The device and its drivers appear to be good, a list of nearby networks are displayed for me to connect to. On attempting to manually connect I get a message "Cannot Connect at this time"
If I then reboot the laptop it successfully connects to my WiFi network automatically without delay or errors and continues to maintain a connection.
When I shutdown the laptop I have the same problem when it is started, I have to restart it.
This same problem occurs with three different wireless networks I have access to.
Switching off the wireless adapter and back on again doesn't work. Switching off the router and back on again doesn't work, I have to reboot the laptop every time.
On all three routers the routers give the laptop a static IP address. The routers give me a different IP address though.
HP Pavilion laptop, Windows 10 Pro Intel i5, 2.60 GHz 8 GB Ram.
I was on 8.1 but did a clean install following the guides on the forums and it worked great. Only issue I had was with the Synaptics settings that keeps resseting after reboot but sorted that out.
Now for some reason 90% of the time my laptop goes to sleep I can only get it to work again by rebooting via power button. I have tried various guides on the forum (disabled fast boot, hybernation, etc) but nothing seems to work. If it does work, it only last a couple of hours at best. I have also noticed that the laptop does not always shut down fully...
I have just done a reset again (did a clean install yesterday) and left the laptop on for about 30-45 minutes and it goes to sleep and I can't wake it. I left everything default to rule out any possible changes I could have made to the settings.I am wondering if it's the iso I got from Microsoft website when I did the install...
I've just updated to 10 after getting my computer back up after moving, and for the most part have really been liking it. Here are a couple of the more annoying issues I've been having:
1) Every time I restart/shut down/reboot my computer, upon logging into windows my Wi-Fi has 'limited' connectivity to my router. I use a belkin USB wi-fi adapter, and have been for years with no issues like this. Windows 10 is the only new guy to the party. The only way I'm able to get it to work is to click disconnect, wait a few seconds, then click connect.
2) I can only run my Outlook 10 as administrator, which you can't do from icons on the task bar, and which also blocks some functionality within the program. When I try to run it w/out administrator it says I don't have permission to access one of my email addresses' .pst folder (yahoo). No error when I run as administrator, though.
The computer goes to sleep after a period of inactivity, when mouse or keyboard is used the tower starts up but the monitor won't. I've gone into Device Manager and made sure mouse and keyboard will wake machine, but alas, no monitor. Must reboot every time.
After installing windows 10 build, I see a boot selection menu each time I reboot your PC. When I get to this screen, if I do nothing it will automatically boot to the Windows 10 Technical Preview within 30 seconds by default. Why is it happening.
My computer (XPS 13) came with Windows 10 installed. It's very finicky about wifi. The computer thinks it doesn't have a wifi adapter at times. Drivers are current, and the adapter came brand new in the brand new computer from Dell, so you'd think it would work.
At home, it often takes at least one reboot to get a good connection. And often it will drop the connection after a while anyway. We even got a new router to see if a more modern system would work... not much.
At work, it connects and stays, but doesn't remember the connection so I have to tell it to connect on most days.
When traveling, it often won't connect to wifi no matter what I do. If it looks connected, it only says "limited" and no amount of forgetting the network and rebooting the computer changes that.
I have a Seagate SATA 500GB HD as a second HD. Windows 10 deletes the letter of the drive every time I reboot/turn off my PC, and I have to reassign the drive letter. Why is this happening and how to fix it?
Yesterday I installed Windows 10 Professional on my Acer Aspire V5-573G laptop. I installed the English (US) version even though I live in the Netherlands. When I corrected the time I have set it to the correct timezone (see screenshot) but it has the wrong time connected to it. As seen on the screenshot the time displayed is 21:49 even though when I took it, it was actually 13:49. Off course I could manually change the time, but I was wondering if maybe this is part of some bigger problem and if there is a better way to fix it.
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Just downloaded windows 10 and it freezes or reboots every time I try and login in for the first time, if u click on anything else on this screen like this isn't me it freezes as well, any work around this to maybe login or revert back to windows 7 without being able to log on?
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
This has never happened to me before upgrading to windows 10. 2-3 times a day my internet connection simply turns off for no reason. If I unplug the ethernet cable and plug it back again it works fine like normal again. This seems pretty weird and I don't know why is it happening.
PS: I have a laptop and my internet actually works fine on my brother's windows 7 laptop even when it turns off for me, so it's windows 10 problem.
Upgraded to windows 10 from windows 8.1 on July 31st, for the first 20 days there were no problems, now my PC will randomly reboot. The event log only shows that the system unexpectedly shut down, no errors. I read that changing when the computer sleeps from never to a set time has solved the problem for some. I tried this and the random reboot didn't happen for a few days, then a update happened on the 28th of August and now the problem is back.
When I reboot and go to enter my login PIN the numlock is off and I have to turn it on. I can't seem to find a solution to make it stay on on reboot, except turning off fast boot. Windows 10?
I was using a machine with Windows 7 Ultimate 64bit, and it was working perfect till the day I upgraded to Windows 10. First, I had a few problems during the update, probably due to the not updated (with the last drivers) nVidia card.
My specs: -SSD hard drive as boot -MOBO is Gigabyte GA-768XP-UD3P updated with the lastest BIOS from 2013, UEFI. -a few other hard drives -nVidia GTX 980 graphic card
Well, I finally was able to install the Windows system, but after the shut down and boot, I couldn't enter it. The computer started to reboot after a few seconds, sometimes I'm able to see the BIOS screen (but pressing any button doesn't work) and then it boots again in a few seconds.
After some search online, I understood it could be a problem of the BIOS that was corrupted (why if it worked till the day before??). I used a very strange system to press the power on button and put down and up the PSU for 3 times, then when I rebooted again I saw the screen with "The main BIOS is corrupted and we have to recover it from a backup".
The setup of the BIOS from backup worked, but with "load optimized default" I then got a Windows 10 blue screen error " :-( INNACCESSIBLE_BOOT_DEVICE"
I then entered again the BIOS and changed some info like AHCI, UEFI only, etc.
Then, after a reboot it worked and I could enter WINDOWS 10 finally.
I thought I was OK, then I tried a reboot and it worked. BUT, when I tried to first shutdown and then boot, again I went inside the BIOS reboot loop!!
Since upgrading to Win 10 anytime that I reboot my machine I get a screen where I have so many seconds to accept either Windows 7 or Windows 7 recovered. I let the timer run down or I hit enter which would load the Windows 7 OS. However Windows ten loads.
I have recently been trying to upgrade to windows 10 on a used alienware aurora r3 pc. I got my reservation, checked the windows 10 app every day, and finally, I was ready to get the upgrade, but I'm having issues installing it. After windows update downloads everything and I get to the installation proper, it takes like 4 hours for it to get to about 30% and then finally reboots. I'm taken to a windows ten loading screen, but each time I get to this point, the loading circle freezes. If I turn the pc off at this point and back on again, it reinstalls my normal windows 7 and I'm able to get back to my files and everything, but I still really want to get 10. Solved Build 10041: Freeze on Restart - Windows 10 Forums My issues seem to be similar to what is described in this article, and it may have something to do with it setting "fast reboot" on by default. What do I need to do to resolve these issues?
I am experiencing a consistent issue with Windows 10 where the computer runs okay, but then it suddenly freezes where I cannot do a thing. So I am not able to save my work or project I am working and lose all my data that I was working on. I then have to reboot the system to get Windows operational once again.
My wife and I both have exactly the same computer - HP Touchsmart 620 - upgraded from Win 7. Our preferences include hiding the Language/Keyboard icon by customising the Taskbar & Start Menu options, and also turning off the touch screen function which now in Win 10 we can only do by disabling HID Compliant Touch Screen through device manager. Here's the thing, my customisations stay, but my wife's default back to showing the language bar and activating the touch screen after every reboot, even though the HID Compliant Touch Screen is still disabled in Device Manager.
Was away for two weeks. Upon return, could not find main user name or files. Tried to do a recovery to the last date it worked. I get a WDF VIOLATION and reboot. Cannot recover.
When I turn on my PC, it starts up but I just get a black screen with the circular arrow. It adds one dot about every 15 minutes. I select start>power>re-start and everything comes up fine. It is slower than Windows 7, which is annoying, but not nearly as much as having to reboot every time.
Bought new motherboard, a new PSU tried loading win10 umpteen times from ISO ( same with win 8 + gen key ) I get this far all the time every time. Just won't go into Windows proper. All the fixes like restore/reset don't work.
I can get the command prompt > but don't have the expertise to know what I could type to understand why I can't progress into any windows OS
tried partition magic + hirens boots to completely wipe the drive then clean install windows have run memtest86, HDD tools, no bad sectors, oh mouse/keyboard are new too . Its only the CPU I haven't changed and that is nicely set at low temp, as in BIOS I've upped the fan to keep it cool.
So I have recently had my Windows 10 laptop take longer than usual to boot up. When everything finally loads up, I check the disk used and it's always at 95-100% for about ten minutes, even though no particular program/process is running high. I've tried a couple recommended tricks (uncheck tips about Windows, disabled superfetch, turn off cloud-based protection in defender) and nothing as worked thus far. The computer itself is less than a year old, and I have plenty of hard drive space and RAM. I've scanned for disk errors, I've done a disk clean-up - and nothing has worked.