Recover Data After Deleting Partition And Creating New One?
Dec 18, 2015
while trying to troubleshoot a lousy 1.5TB WD drive I had accidentally deleted and recreated the partition on a different USB drive without noticing.What are my options? I don't have a spare drive to restore to. The drive was only using 350GB of 900gb, but it has been filled and erased several times without defragmenting. I have it unplugged now.
It's not entirely a disaster; aside from my (dubiously obtained) movie collection there's nothing really that I need and can't redownload or have on my SSD.
View 3 Replies
Similar Messages:
Oct 6, 2015
I was running win 7 with 4 partitions , thought to upgrade to win 10. While installing it didn't allowed me to install. I thought i can run diskpart clean on one partition, selected one volume and ran clean command, but it still cleaned all the partitions. Long story short, I cannot boot my OS until I install OS on freshly created single partition. I was told to use partition recovery apps like partition and mount software, Do I have to install OS on it anyways and once OS is installed, instal the partition and mount software for the recovery?
View 8 Replies
Aug 17, 2015
Then I used that to connect the onedrive. Then when I rebooted, I realised I had forgotten to write down the password. This means I cannot log into windows with my user id. I've tried calling, and the automated password reset website, but because I hadn't actually sent any emails or created any folders, I cannot recover my login. I'm losing 5 years of personal pictures, wedding pictures, music, podcasts, books... it is terrible and I haven't been able to sleep since I did it.
View 6 Replies
Nov 13, 2015
Is it enough to make image from windows location (c: ) Or is necessary to make image from 100 mb windows hidden drive in addition? I want to create an image from my laptop to recover windows when it's corrupt.
View 4 Replies
Nov 27, 2015
I had Windows 10 Enterprise on a ssd 480gb sandisk ultra II but It's corrupted, I can't even launch Windows or repair tools.
I've managed to run repair tools and get a command prompt, as diskpart says, my disk is on a raw partition now, and it shows the following:
Total space on disk: 448gb
Space available on disk: 448gb
I've read something that on raw filesystem Windows can't see the drive then I'm wondering, if diskparts says that the space available is the same tan total disk, does it mean that I've lost all my data? Is really important for me to recover the data.
I've installed Windows 10 on another drive, but the drive isn't recognized, not in diskpart, not in Windows explorer, and tried about 5-6 programs for recover data on raw disk/partition and none of them saw my disk.
The main question is if I lost all my data, because if not, I will give it to the shop for repair it.
View 3 Replies
Feb 10, 2016
My laptop running Windows 10 updated to the latest build and would not boot. I kept getting Missing boot manager missing. Eventually I removed the drive and replaced it with my backup clone but that backup is missing a week of a lot of work so I was hooked the original laptop drive to my pc.
Short story, I confused the laptop drive with another disc I a, working on and went into admin tools, storage, and deleted the three partitions on the laptop drive. Since I have tried to recover the partitions with Acronis Disc Manager but the volumes it identifies do not fit. There are three partitions. The primary, the HP recovery and the HP Tools. Total disc is 465GB. The primary partition is 452.
The results I get have seven or eight partitions sizing various sizes between 190 - 350 GB. They all seem to intersect.
i them tried the free EaseUS app which lists multiple versions of every file ever deleted. Is there any easy way to do this?
View 4 Replies
Mar 14, 2016
I've upgraded from win 8.1 to 10. after upgrade all my files were in local disk user and in the folders but were not in library folders e.g pics were in local disk user pictures but not in file explorer pictures. so i moved every thing to the folders and after restarting my laptop everything was gone... what can i do to recover my data.
View 1 Replies
Nov 28, 2015
I installed Windows 10 on a new PC, with OS on Samsung 950 PRO. For data disk, at this stage, I use a Samsung 840 PRO which I transferred from my old 8.1 PC.
The data disk now shows in diskmanagment 351MB unallocated space, and 119 GB NTFS Healthy (Primary Partition).
How can I reclaim the 351MB unallocated to get maximum capacity of the data disk?
Maybe this a standard case of repartitioning, but I am not familiar with that and do not know how to do it.
View 6 Replies
Oct 1, 2015
I need to install Linux for school and therefore was partitioning my windows. I created a 60GB and 1GB swap ext3 partitions using easus partition master and now I am getting a blue screen with that code. Note; I haven't tried to install Linux yet.
I used repair in windows usb media which couldn't find anything, then I tried the following:
photos uploaded upsidedown and in REVERSE ORDER
View 9 Replies
Aug 6, 2015
I DO NOT have two OS's installed just one.
However after installing it says that both my HDD and SSD are both system, boot, hibernate.
I can not format or delete my HDD it says that it can not do so because the empty, blank HDD is a "Healthy, hibernate, boot, system drive"
How do I go about deleting this.
View 5 Replies
Aug 15, 2015
How do I create a system reserved partition on my SSD C: drive. I have 3 other drives installed and all have reserved system partitions.
View 5 Replies
Aug 26, 2015
I just upgraded my laptop from windows 8 to win 10. The free upgrade of course did not delete my files from window 8 so I went ahead and installed windows 10 on to my USB and booted from it for a clean install. While installing win 10 however I managed to do it on my C drive. I believe my previous OS was on D drive as when I go into my system properties now, C drive = 373 GB free from 393 GB which has the windows icon over it to show that OS is inside it and the 'D' drive has only 43 GB free from 393 GB capacity.
I would like to free up my D drive and delete all previous files and maybe also remove partition and only have one storage which is C drive. How to do it? Do I just go into my D drive and delete all the files inside it? such program files x86 etc? while running window 8 I managed to get a lot of spyware, adware etc on my system and hence why I preferred a clean install of windows 10.
View 1 Replies
Jul 30, 2015
So when I built my pc I didn't get an ssd, now I got one since windows 10 is out and I want to install the upgrade on an ssd, how could i go about putting the os on the ssd without deleting all of my files on my terabyte hdd?
View 1 Replies
Feb 7, 2016
Anyway, a while ago, I was playing with booting installations from a HDD, which worked, but now it seems I'm stuck with the partition I used to store the installation on.
So I have two questions:
1. To delete the H partition, I need to first set the C one to active, correct?
2. Is it even safe to delete the partition since it's a "system" partition?
The H partition is empty as far as general files go, but since it's bootale, it always shows up as a boot option, which is mildly annoying.
Image: [URL] ....
View 1 Replies
Jun 29, 2015
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
View 1 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Jan 10, 2016
While re-installing Windows 10 on my Samsung ativ book 9 (15" core i7), I had two partitions (256 gb ssd) half capacity each one, one holds the os, and the other my data.
when selecting the partition where to install windows 10, it tolds me that I cannot so i googled it, i figured out that i have to clean the partition and then convert it to gpt using diskpart.
so i did but instead of cleaning the system partition it deleted all the disk data in a second.
I have now one unallocated partition (256 gb), i created 3 partition afterwars, 500mb efi, primary for os, and third for my data. windows 10 installated successfully, but my data all gone.
I tried every single data recovery app, but all of them just recover some folders that doesn't have any value like desktop.ini. (by the way, i tried in the days after this data earthquake not to have new data to avoid overwriting the old precious data).
View 2 Replies
Aug 28, 2015
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10
View 8 Replies
Jan 21, 2016
I have been unable to create new folders in File Explorer. When I click on a new folder icon, I get the "not responding" message and have to exit the application. This began happening several weeks ago and is now happening whenever I try to create a new folder.
View 2 Replies
Dec 21, 2015
I downloaded ProduKey and it produced my OS key. Here is the link;
[URL]
Of course this will do you no good if you are not up and running so if you lost your key run this and write the key down and put it in a safe place.
View 2 Replies
Sep 1, 2015
Right click on Desktop > Personalize > Themes > Desktop Icon Settings > Add This PC...
This will make a "This PC" shortcut on desktop, which if you right click on, and choose Properties, will open up "System Details Window" rather than just showing a simple Properties window.
I want to automate the creation of this shortcut by a .reg or a .bat file somehow, Please note, just .rar or .bat automation.
View 9 Replies
Aug 29, 2015
Going from Windows 7 to Windows 10 I don't know how to create & save a document.
View 4 Replies
Jul 31, 2015
Is there a way to create boot media on windows 10 for use in another pc? Customer tried to install w/o a backup & hosed the system, now black screen with mouse arrow & that's it.
View 1 Replies
Sep 4, 2015
I realise this problem would be similar regardless of which Windows being used. I partitioned my HD and moved documents to new partition. Mistakenly removed the partition without restoring files. Is there any way of recovering the lost files?
View 8 Replies
Oct 25, 2015
My kids computer is all screw up he cant turn it off or reboot because he forgot his windows 10 password to log on he has all his games this and that on there what software tool would we use to get his password recovered? I know it can be done just don't know what to use i was thinking that jellybean key finder or is that only for serials.
View 5 Replies
Jan 5, 2016
So in like 2014 I used to play a game and now I am playing it , I would like to get those 2014 files to get the older version of the game as in the file there will be a .fp file. I would like to get that .fp file of 2014 , Today I have the latest updated files of the game , Is there somehow I can get a very old version of the file so I can get that file to get the older version of the game? I tried right click on the .fp and click properties and prevous versions but i am only getting the game old file of 2015's summer. I really want that 2014 .fp file to play an older version of the game.
View 6 Replies
