I use a 2 drive set up, a small solid state for my operating system and whatever game I'm currently into, and a 2TB storage drive.
My storage drive (D:) bombed and I took it in for data recovery. The tech saved about 1.3TB of 1.6 used. He put the image onto my new drive and got it going again. However when I try to access explorer or anything pertaining to D: it hangs for about 45 seconds before giving me access. I ran CCleaner first off to knock out registry entries that lost their home but haven't seen any improvement.
What else should I do to get this thing back in order? I'm on Windows 10.
There was a folder titled Windows.000 that was created after my previous upgrade to windows 10. This folder had all of my data on it and now it has completely disappeared. It feels like somebody has physically come into my home and gutted my hard drive. My C: properties say 1.9GB Free out of 2... WTF??
So when I decided to build this pc, i wanted it to have Win7. When i booted it up, i kept getting the message asking if i wanted to upgrade to Win10. so i thought "hey, i paid 50 dollars for win7, so why don't i upgrade to win10 for free instead of paying 100 dollars," so i did. and all of my downloads and files, everything, saved so i didn't have to download everything again. but turns out i don't like win10. so if i go back to win7, will everything stay on my hard drive?
I just bought a new computer and it comes with Win 10. I need to plug in my old hard drive with all my installed programs and data (Win 7) and moved them to that new drive (Win 10). Is there a software that you would recommend for this and what should be done? Clone or image? I am lost in terminology!
Since upgrading to Windows 10 from 8.1, I've seen the following message several times.
Display Driver stopped responding and has recovered Display driver Intel HD Graphics Drivers for Windows 8(R) stopped responding and has successfully recovered.
When it happens, my laptop screen goes black for a few seconds, except for the taskbar and toast notification. I also have an external monitor that doesn't seem affected at all.
I can reproduce the error pretty consistently if I rapidly switch a Flash video back and forth between full-screen and embedded, but that's not the only time I've seen the problem.
As far as I can tell, everything continues running. Even the full-screen video continues running after the screen isn't black any more.
The weird thing is that the driver name it shows isn't the driver I'm using. I've already upgraded my display drivers to the latest available from Intel's site.
Some things I've observed:
The information presented by Windows in Settings -> Display -> Advanced display settings shows the driver for Windows 10 that I downloaded from Intel.The "Intel HD Graphics Control Center" that was installed along with the driver shows the latest driver version that I downloaded from Intel.In Settings -> Apps & Features there's only one "Intel(R) Processor Graphics Driver" listed.Event viewer shows very little useful information:
General Display driver igfx stopped responding and has successfully recovered.Details (XML View): - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Display" /> <EventID Qualifiers="0">4101</EventID>
[Code] ....
It's conceivable that Intel updated the driver, but forgot to change the string somewhere so the error is actually for the Windows 10 driver. I don't know how to find out exactly what failed or why. It's getting that string from somewhere.
My computer (Asus transformer Aio) is very slow, it takes long to open a window or browse internet, or wake up from the screen saver. The hard disk is working non stop, the light is on all the time and I can hear it.
I tried to clean it with windows tools (defrag), and ran CCleaner and Malwarebytes Anti-Malware but they didn't find anything wrong. I just launched the Windows Defender complete analysis. The basic one says nothing wrong as well.
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
What is the MapData folder which has recently appeared on my D drive? (This is the drive containing all my user folders with the exception of Pictures.) It contains subfolders diskcache, mapscache and files overrides.json, updater.nma
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
One of my WD Green 2tb drives has become raw and can't be used. Windows will not complete a format of it. Shows up in my computer. Is there any way of saving this drive?
I am currently trying to convert my mSATA SSD from MBR to GPT. I have downloaded EaseUS partition master and can see that I can convert the disk using the software. My question is however if this is possible to do with my mSATA drive that my PC boots from and has Windows 10 installed or does it have to be a drive that is not booted from. I know there are lots of threads on this however none specify of this is possible using the drive you are booted from.
I have noticed a bug in windows 10 home.Copying any file from/to a pen drive connected to my windows 10 PC is very slow. Transfer speed is 5mbps maximum.Same file is transferring at normal speed(20-25mbps) when I transfer it within local drives(i.e. D drive to E drive) Hence I can say, transfer is slow in case of PC and Pen drive ONLY.
P.S: 1) Same pen drive is working perfectly in another PC having windows 8.1 running. 2) Drivers are up to date. 3) I upgraded(not done clean install) from Windows 10 insider preview to Windows 10 home.
Since I Upgraded my Laptop from windows 8.1. File transferring from Pc to any USB drive becomes very slow. Like in windows 8.1 the speed was 25 Mb/s to 70Mb/s, but in windows 10 it never gone above 15 Mb/s.
I have had windows 10 since the beta and I recently bought a kingston 120gb ssd I want to do this by reinstalling but since I got windows 10 during the beta with no install disk I have no ability to simply reinstall but how to transfer my license.
I just recovered my pc due to a wdf_violation from the win10 iso on a usb. I did a recovery where my personal files would not be deleted. I left the computer to sit as it recovered and came back to a black screen. I've restarted the computer several times and nothing appears to be happening as the monitors stay black, but the pc is running.
I have two hard drive on my PC, as SSD for the OS and a HDD for all my storage.I seem to have a problem with search, that it will only find stuff that is stored on the SDD.To get it to look for other files on the HD, I have to click search my stuff, and even then it still doesn't work.Is there a way to fix this? As most of my stuff is on HD and click search my stuff is a bit annoying.Also when I click rebuild index, nothing happens. I get a dialogue box saying it will take a long time, but then it doest say its indexing
My old computer was a windows 8 that was upgraded to windows 10. I just ordered a new i5 6600 which comes with windows 10, a 250G SSD and 1 TB hard drive.. My old hard drive appears to be a Seagate Barracuda 1TB SATA which seems to be the same as the one in my new Vanquish. My old hard drive is 2/3 full and is backed up often. My question is can I move this old hard drive to my new computer as a separate drive without formatting it and use the data on it (or transfer my data) or does it need to be formatted (thus giving me roughly 2 TB of space with the 1 TB provided with the computer). It was my C: drive in the old computer.
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.