Reinstall After Disabling Raid 0
Jul 31, 2015
I currently have Windows 10 installed on a Raid 0 of Two Samsung 840 Evo's. Because of a change in the way I am using the PC I need to disable the raid and leave them as separate drives.
The reason I am concerned is that windows 10 is bound to your Hardware, not you. So for me to reinstall windows after disabling raid would I need a new copy or would just installing windows 10 again work?
Alternately if I was to re-install windows 8.1 on my machine after disabling raid. Would I then be able to do the upgrade again and get windows 10 that way?
View 1 Replies
Similar Messages:
Jan 25, 2016
Okay. I have been doing a lot of cloning and migrating an OS before but I haven't done cloning or migrating an OS from dual drives in RAID 0 mode.
It's not my PC. Is it a different approach or is it just like working on a single drive? Can Macrium handle this?
Btw, I know clean install is the best way to go, but I was told by the PC owner that she can't afford to install all her programs back due to time issues, etc.
View 9 Replies
Dec 19, 2015
I have an ssd and I want to get another to configure it in raid zero for faster pc but I have already installed windows 10 on one, is there a way I can configure it in raid zero without having to reinstall windows?
View 5 Replies
Oct 17, 2015
I for one have had no trouble with windows 10. One thing I did do before I upgraded was ran antimalware, updated my driver, cleaned out all the rubbish shortcuts that did not work.
Then ran all updates then upgraded. All I had to do was update one driver, then let windows 10 put in the updates it wanted. Then uninstalled IE11 and only using Edge,.
As you can see it is no where in the file system, If just disabled it would show up.
View 19 Replies
Mar 20, 2016
I bought two new SSDs to be used in a RAID 0 configuration with a Dell 9020 under Windows 10.
Before the drives I arrived I configured two old HDDs in RAID 0 and installed Windows 10 as a clean install. This worked perfectly.
Once the new SSDs arrived I configured these in RAID 0 and started a clean install. Windows correctly identified the disk with the correct capacity and the install completed without issue.
When the computer restarts I got a "A disk read error occurred" error.
If I boot from the installation media to a command prompt I can see that the Windows files have been correctly installed to the C drive of the RAID 0 array.
I also tried loading the RAID drive during Windows install but this made no difference, and if it was the driver causing the issue it would not have worked with my old HDDs.
If I open diskpart I see that the drive is not marked as boot, which it is when I check these details on the old HDDs in RAID0.
View 1 Replies
Feb 23, 2016
I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?
View 5 Replies
Aug 13, 2015
I honestly don't use OneDrive and I just see it as bloatware. Anyways to remove it? I tried looking in the Windows built in uninstaller but I don't see it there.
View 1 Replies
Mar 8, 2016
I detest them. And on this particular cheapo keyboard, they're in a *particularly* annoying location for me. So what I want to do is to turn them OFF! Preferably permanently, altho in Win 10...this might be impossible. (A hint in DosBox suggested deleting certain junk keyboard devices...but Windows 10 put them back in when I rebooted. NO!! But Windows is the god of the computer, so YES.) Still, as long as I have SOME method to turn these buttons off, that would be a huge improvement.
This is a generic keyboard, using the default Windows 10 driver.
View 1 Replies
Dec 30, 2015
I would like to disable caps lock on my keyboard having previously done it but itsa not working now.
I have tried this:
[URL] ...
...but the scancode binary number mentioned isn't there in my registry.
View 1 Replies
Jul 29, 2015
will one have installing Windows-10 on a machine now running Windows-7 64-bit with an older BIOS? In particular, the BIOS setup area has no references to UEFI. So, references to "disabling Secure Boot" don't make sense. (I have a DELL Vostro 1500, bought in March 2008, which is still very functional.)
View 4 Replies
Nov 13, 2015
So I know very little about raid configurations and how to set them up. I have just finished building my pc and everything is working great, however what about the raid configuration my 500gb ssd and 1 tb hdd have been set up in.
I am therefore wondering a) how to find how my storage has been set up, b) which raid configuration to go for and c) how to set it up.
I was thinking of having the ssd and hdd already installed acting as two different drives. i have put windows 10 and all the programmes on to the ssd and would like the hdd to be seen as if it were a usb stick (I think that is what it is at the moment as under this pc the ssd and hdd show as different drives). Then have those two drives mirrored to a single 2 tb hdd.
I have heard about raid 5 but from what i have read this spreads the data across multiple drives and the drives used have to be the same size and so wont work how I would like them to.
View 1 Replies
Sep 6, 2015
I have 2 ssd drives and one mechanical for back up.
Currently I have windows 10 installed on one SSD and nothing on the second. I have cloned the SSD with OS onto the mechanical and I am trying to boot to it and format both SSD drives so I can pool them into a single storage drive with the new windows 10 utility.
I have changed my boot order in the bios to boot from the mechanical drive but windows will not let me delete/format the SSD that I originally installed the OS onto.
View 1 Replies
Feb 19, 2016
I was recently reading this article on ShieldsUp [URL] .... about disabling the client for Microsoft networks.Are there any real security benefits for doing this and if so what would happen if I did? e.g. would I still be able to receive updates from Windows? I've already unchecked file and printer sharing and not bothered about any file sharing.
I'm using Win 10 btw ..
View 1 Replies
Aug 19, 2015
I'm on a Samsung laptop that came with Windows 8, I downloaded Windows 10 ISO and wanted to install fresh from the USB, then this happened:
1. The USB drive won't show up on the boot menu if I don't disable FastBoot in the BIOS.
2. The USB won't boot if I don't disable secure boot in the BIOS.
So I do disabled FastBoot and SecureBoot and the USB drive boots up normally and Windows 10 gets installed.
One problem that I found is that if I enable SecureBoot back again after having installed Windows 10 it won't boot anymore until I disable SecureBoot.
My question is, is it possible to install it without disabling secure boot? (I tried Windows 7 USB DVD Download Tool and Rufus 2.2 to create the bootable USB). And if not am I really missing something by keeping SecureBoot off on the BIOS?
View 1 Replies
Aug 12, 2015
I recently installed Windows 10. But the drivers for my VIA soundchip which came with the motherboard don't work with it. I am able to install it but when I try to run HDVdeck it doesn't open. It did work in W8.1. Any fix?? Or can I disable front jack detection any other way??
View 1 Replies
Jan 30, 2016
I have Windows 10 Pro installed on an SSD in AHCI mode.
I would like to add a RAID 1 array to this system for storage but I understand some registry tweaks must be made before I can change my BIOS from AHCI to RAID mode or I'll end up hosing Windows.
I've read that the edits for older Windows at [URL] do not apply to Windows 10. know the registry edits that work for Windows 10?
View 3 Replies
Feb 10, 2016
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
View 5 Replies
Oct 19, 2015
I have a PC with Asus Z97-Pro mb. OS (W10) is on SSD. Two SATA HDD's (each 1 TB) contain dissimilar data. Can I add a third SATA drive (1TB) and create a RAID-1 configuration with only one of the two existing drives? The mb manual says that when SATA ports are set to RAID mode, all SATA ports run at RAID mode together. Does this mean that I cannot do what I am asking?
View 1 Replies
Mar 27, 2016
Windows in general and I know that Win 10 has many of the things win 8 and 7 had so here goes. It might be worth mentioning that I have win 10, pro, fully updated and patched.
1. How do I disable the password screen when windows boots ? It's very annoying. I tried the netplwiz thing and didn't work. When I did that, another account would appear in the login list called other.
2. My laptop's speakers (lifebook 1780) are muffled and quiet to about 50% of the volume they should have. All volume is turned up, drivers are updated, all sound and device settings are calibrated and set accordingly to the highest quality. Should I try rolling back the driver ? It worked for some I think. It's worth mentioning that if I reduce the quality of the sound to less 41hz or whatever, the speakers increase slightly in volume.
View 1 Replies
Sep 22, 2015
My current hard drive is failing and, since I have two brand new identical hard drives lying around, I decided to do a RAID 0 set-up. I went into the BIOS and set SATA 1-4 as RAID and 5-6 as IDE. I left the Raid ROM as Legacy. I then went into the RAID set-up and turned both hdds into a RAID 0. I then inserted my usb stick with Windows 10 and started the installation process. The installer saw the raid without any issues, installed windows, and then rebooted. Unfortunately, it was at this time the error in the title appeared. No matter what I did, it would not stop producing the error. Even attempting to boot to my previous hdd (which was not included in the raid set), would produce the same error. The only way to stop it was to turn off the raid and completely remove all of the raid set partitions. This allowed me to boot into my old drive at least.
Specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-812034 °C Zambezi 32nm Technology
RAM 32.0GB Dual-Channel DDR3 @ 2400MHz (11-11-11-28)
Motherboard ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)28 °C
Graphics G276HL (1920x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA)28 °C
Storage
465GB Seagate ST9500325AS (SATA)26 °C
1397GB Western Digital WDC WD15EARS-00Z5B1 (SATA)33 °C
465GB Seagate ST9500325AS (SATA)24 °C
298GB Seagate ST3320620AS (SATA)32 °C
232GB Maxtor 6L250S0 (SATA)35 °C
7GB Memorex TRAVELDRIVE 005B USB Device (USB)
Optical Drives HL-DT-ST BD-RE WH12LS30
View 1 Replies
Aug 6, 2015
A small server setup by a linux programmer who is no longer available and support is non-existant failed after an automatic update left the machine unreachable from the LAN. Samba crashed and I now have 2 RAID arrays formatted NTFS that have thousands of files. I am going to install Windows 10 Pro on it. Will I be able to recover the data on the two RAID arrays?
View 1 Replies
Dec 8, 2015
When I go to Start -> Power -> Shut down, it displays the "Shutting down..." window, then the screen goes black, but the laptop won't shut down completely. That is, the WiFi, Bluetooth and Power (light bulb) indicators are still on (and the battery indicator too if plugged), and I have to force (power button long press) the laptop to shut down. I can also shutdown the WiFi and Bluetooth devices using the keyboard at this stage (with FN button). And if I keep the laptop this way long enough (unplugged), my battery will be completely drained.
I recently disabled Hibernation (cmd admin -> powercfg/h off) so I suspected it to be the culprit. So I enabled hibernation again (cmd admin -> powercfg/h off) and my laptop was shutting down as it should. I then disabled hibernation again and the problem came back. I also figured it might be something to do with my power plan so I reset it (Power options -> Change plan settings -> Restore default settings for this plan),
View 8 Replies
Aug 23, 2015
I recently upgraded to Windows 10 and now find that I can not disable the touch pad as I did in Windows 8. I have found I can disable it except for the buttons but when the computer starts again I have to disable it again.
View 2 Replies
Jul 22, 2015
I followed this guide and rebooted but I still get the login screen where I have to enter a password before logging in to Windows 10.
View 1 Replies
Oct 8, 2015
I am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
View 9 Replies
Aug 20, 2015
When I built my PC I only got a 250gb ssd, figuring that it would be enough for the time being. I have been having issues with what to keep and what to get rid of on there.Is there a way to convert my (C drive to raid 0 keeping everything installed or will I have to format and reinstall everything. Also, could I do the same with my 1Tb secondary drive so I won't have to re-download everything as I have a slow internet connection.
View 1 Replies
