I have a new installed Win 10. I wish to be able to connect remotely to my computer via VPN.
I created vpn connection in Win 10, but it will refuse connection with the following error message:
"The remote connection was not made because the attempted VPN tunnels failed. The VPN server might be unreachable...." etc.
What are the required steps to enable my computer be reached remotely via VPN?
Once in a while it seems my computer just freezes an then I get a message pop up an says my remote call procedure failed.
View 5 RepliesUsing Windows 10 on both PC's.
I have managed to get PC 'A' to remotely connect to PC 'B' but cannot connect 'B' to 'A'.
Both PC's allow remote access.
I used the Win 10 Remote Desktop App.
Since I upgraded to 10, I can not connect to my virtualbox remote consoles like in win 7/8.1. Have Win 10 on two system and they act the same. I can rdp from Win 7 to the Win 10.
View -1 Repliesdisconnect 1-2 min say "login another user"
i have win 10 pro im change remote resvices session time limit and another method but not solved...
If remote computer has user password all works well,but if no user password can't log on. In windows 7 this was not a problem,is there a work around so if two windows10 computers have no user passwords you can connect?. This is on a private home network. Don't want to use third party software for this process.
View 2 RepliesI'm getting this error: ... when I try to open any picture (jpeg, gif).
I have followed different forum topics for solutions and so far I:
- Double checked that RPC service is running & on automatic. RPC Locator is not started & on manual
- Previously had some issues with opencl.dll being corrupted, but following Kyhi's suggestions here: Error DISM restorehealth - Windows 10 Forums
.. I managed to fix it (as you can see from the screenshot, the sfc shows no errors anymore)
In the event viewer I get these:
Activation of app Microsoft.Windows.Photos_8wekyb3d8bbwe!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational log for additional information.
[Code] ...
... when I try to open a jpeg file.
I installed windows 10 about a week back and although its been having a lot of freezes, its otherwise run pretty smoothly, except for today. I haven't had this issue before today but now whenever I go to open a photo using the normal windows photo app i get an error saying "the remote procedure call failed" and it won't open.
View 10 Repliesmy remote desktop connection has suddenly stopped working on windows 10.
1) how does one uninstall and reinstall it in windows 10? I've searched on google but can't find a solution (that works) anywhere.
2) are there any (free) alternatives to windows' own remote desktop connection?
When I opened up System and Security>System>Remote settings the remote tab only display the 'allow remote assistance' box and I do not see 'allow remote desktop' box.
I think someone is trying to get onto my PC and I cannot stop it.
I bought a new laptop with windows 10 mainly for remote desk top connection. When I connect to the server remotely the icons and letters are very tiny.
Is there any new app other than microsoft remote desktop connection?
after recently downgrading and then upgrading back up to Windows 10 I experienced yet another problem. Now I have no remote access connection manager service. This was discovered by a technician via live support trying to create a VPN connection.
The other problem I have is installing virtual machines. Here are a couple of screen captures with the error messages here:
I don't want to resort to doing a complete clean re-installation of Windows just yet. Furthermore I also did come across [URL] and was wondering if that would bring me back to a normal functioning Windows 7 as even downgrading from Windows 10 in the past seemed to have caused some problems.
I never had this problem on Windows 7. But when I remote to a Win 10 PC, start a process, let's say copying files, when I close the connection (via the X at the top...NOT disconnect from start menu), it closes the copy process.
Are there some new settings or something that I need to change to correct this?
I have noticed since upgrading to Windows 10 I am unable to Log into my work network which uses Server 2008. It keeps giving me the following error. I have added it to the compatibility mode settings but still get the same error. This is the following error I am getting " The wizard cannot configure Remote Desktop Connection settings. Make sure that the client version of Remote Desktop Protocol (RDP) 6.0 or later is installed on this computer"...
I have attatched a screen shot also.
I currently use custom "wide" size live tiles as game shortcuts, and I would like to be able to make my "games" group wider or, ideally, turn off grouping altogether because I only have games pinned. Are either of these things possible?
View 6 RepliesEverytime I wake up my desktop from sleep, I get the BSOD with the message - Attempted Write To Readonly Memory, and the system restarts. I have this problem for a few months now, since I was on Windows 7. I thought the problem might go away after upgrading to Windows 10. But even after the upgrade, the issue still remains. It is pretty annoying as I can't leave my system idle for a few minutes. I'm attaching recent dumps and msinfo file ....
View 1 RepliesAny open or minimized applications/folders etc are made smaller and pushed into the top left corner when I switch sources on my amplifier to go from watching the PC to any other source and then back again to the PC.
I've just switched sources now and Chrome, which was maximised is still maximised, but a random open folder which was maximised is now 1/8th of the size of the screen and pushed all the way into the top left corner.
If utorrent is maximised, nothing happens, if it is anything but maximised it gets crushed into the top left corner.
I'm using a Samsung tv and Sony amp, but I don't think it has anything to do with them.
So today I tried to update to windows 10 from windows 7 through the "get windows 10" app on my desktop. Everything went well until reboots started. When my computer attempted to reboot it stuck at start up screen where you are supposed to either go to boot menu by pressing f12 or let your system boot like it should.
View 1 RepliesAfter upgrading from Windows 7 to Windows 10… The 1st time it got me to the welcome screen with my name and asked for my password. Typing in password made it unresponsive, all I could do was move the Mouse around. Searching the Internet for a solution on another computer, I unplugged my Wi-Fi adapter and rebooted. I was able to log into Windows 10 and everything seemed okay.
I plugged the Wi-Fi adapter back in and rebooted, it got to a screen with the date and a picture of a beach. From there I couldn't do anything. The only thing on the screen was the Internet icon in the lower right-hand side of the screen. There was nothing to click, I tried clicking all over the screen, nothing. I unplugged the Wi-Fi adapter and rebooted. It got to the same screen, only difference was it indicated no Internet connection available. Nothing to click on, clicking on blank space, the date, the Internet icon, All did nothing.
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
Bought a new HP Desktop computer and made a mistake when setting up my Microsoft account with my email. Can't seem to get in to edit the "administrator's" password.
View 3 RepliesI use Acer PC with specifications:-Windows 10 Pro; Pentium (R) Dual-Core; CPU E5200@2.50 GHz; Installed Ram: 5.00GB (2.97 usable); System 32-bit operating system, 64-based processor
My computer makes humming noise and then crashes with blue screen and the message Attempted execute of non execute memory.I have to restart my PC and sometimes with difficulty. I have tried to update my processor driver but no success.There may be other softwares needed to be updated. I can't set my recovery point either.
Win 10 computer can see the XP machine and access shared files, like wise from the XP machine. I can remote control the XP computer using Desktop Connection, it works great. What I cannot do is remote control the Win 10 computer from the XP. File sharing and network discovery is setup on both. The network was established before Win 10, as the group is WORKGROUP. Too many devices to go through and change over to HomeGroup.
The XP computer is the professional version with Remote Desktop installed. I do not get any numerical error msgs to track down the problem. I have tried using the IP address and computer name but neither work.
I have a windows 8 computer plugged in my tv and it has a microsoft account.I try to connect remotely from a windows 10 machine. I cant seem to enter the right user name. I have set up the tv computer to allow remote desktop and it works great with the local user i created, but with it doesn't work with the microsoft account.The name of the pc plugged into the tv is called TV.I also added the user into the remote settings.
Weird is that it works with the local account. How to do this with a microsoft account?
I am currently using Windows 10 Pro. My query is, when during the remote access session, why the background screen goes black?
View 1 RepliesI am looking for a Remote viewer application that i can use to look at my other Windows 10 box from my windows 7 desktop. I can use RDP but i want something i can use to just view the desktop, i have dameware but does not work with Windows 10. any application that free out there. ive also tried Push vnc doesnt work either.
View 9 Replies