Repair Error - USB Boot From BIOS?
Oct 25, 2015
I turned on my PC and got a Windows 10 error saying my PC needed to be repaired. I can go into the BIOS menu but I don't know what option to choose to reinstall Windows 10. I have it downloaded from the official website on a memory stick but I am thinking of buying Windows 8.1 from Amazon cause I do not like Windows 10 and want the full version. I would go with Windows 7 but I don't know what is and isn't legit on Amazon. I do not want an OEM version since I may be upgrading my PC and will want to reinstall Windows if I have to once again.
View 1 Replies
Similar Messages:
Oct 1, 2015
Every time I boot up my computer it does a repair on my computer then shows a error. The error says "automatic repair couldn't repaiclr your pc. Log file:EWindowsLogFilessrtSrtTrail.txt. I have windows 10
View 1 Replies
Feb 26, 2016
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
View 1 Replies
Dec 8, 2015
I was trying to play a game the other day after not playing for a long time. I hadn't restarted the computer in days. The game wasn't loading properly so someone suggested restarting the computer. I decided to restart my PC. Waiting for it to restart i was met with a Windows failed to start or something like that. I clicked advanced options i first clicked System Restore and of course all the restore points i set every month were somehow gone. Because i waited and waited and waited and suddenly it told me there was no restore points found. I then tried opening up the command prompt and switching to the D: drive because for some reason my HDD becomes D in the automatic repair. But anyways i punched in chkdsk /f. I was surprised at how much it found. I then thought it might actually start now! I restart. It doesn't work. I turned off the computer last night and haven't touched it since.
P.S. I also tried Resetting. That failed too.
View 4 Replies
Feb 7, 2016
I found my laptop was stuck in some loop, it wasn't able to boot up and offered me to automatically repair it, however it doesn't solve anything and I've tried doing a full system reset to it however the same problem occurs still, it just doesn't boot and offers to restart and try to repair again or more options. I have tried different commands such as the SFC, CHKDSK, but got no where.
Laptop is Windows 10, Asus k501-U, i7 6500u, 12gb Ram, HDD 1tb + 16 gb SSD ...
When I do start up repair I got this message a few times: 'Start up repair couldn't repair your PC...
Log file: C:WINDOWSsytem32LogfilesSrtSrtTrail.txt
And when you do CHKDSK (I think) end error message is 'Failed to transfer logged messages to the event log with status 50'.
View 14 Replies
Oct 30, 2015
I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
View 9 Replies
Aug 27, 2015
Yesterday my computer started up the automatic repair service when i turned it on. It attempts to diagnose the problem and fails. I've run chkdsk on both the boot and regular partitions of my install drive. I tried to repair using an install disk but it says it cant because my install drive is locked. I also tried resetting from within the recovery environment. When I did it got to 8% and then said it couldn't reset the os as it encounter a problem during the reset. I'm running Windows 10 off an SSD.
View 3 Replies
Nov 21, 2015
Windows won't boot, and it also won't repair install, refresh, reinstall (Windows 10), chkdsk, boot repair etc. I have tried all these so unless anyone can think of anything else I will have to do a clean install and upgrade. I suspect the hard drive has failed though.
View 2 Replies
Sep 8, 2015
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
View 1 Replies
Mar 26, 2016
I have an i7 build, asus z97a mobo i upgraded my graphics card from an nvidia 970 to a 980. When i powered up system went to bios, i cant get windows to boot. I reinstalled the 970, still no windows, then tried onboard graphics, took out mobo battery and jumper on board to reset, still cant get windows
View 1 Replies
Aug 19, 2015
My problem is that I can't access UEFI Firmware settings or Boot from USB/DVD in the Advanced startup. They are missing. What can I do? I want to go back to windows 8.1 (Don't have windows.old folder), but it gives me an error when I install it when windows is running. That's why I want to boot from DVD, but I can't.
View 9 Replies
Sep 14, 2015
I was playing with disc partitions and i accidentally deleted something... The problem is, that when i start my computer, Windows boot manager error appears (with no options, nothing, just some text about how should i reinstall / repair...), but when i start my computer, i have no way to access BIOS (I know how to access bios in my pc, I was accessing it like 20 times during last few days while installing various OSs... always with F2).
So actually I am stuck in a loop: start pc - cant access bios - windows boot manager error- restart - cant access bios - win boot manager error - restart....
With windows, i had problems with accessing bios before, but it could be solved by some kind of "absolute shutdown" of a system - holding shift while clicking "Shut down" - then i could easily enter bios with F2 during start.
View 9 Replies
Sep 5, 2015
Have a Dell XPS 8300 which came with Win7 Home Premium. 10-12 days ago, finally got my system upgraded to Win10... but, after completing the password, all I get is a black screen.
FINALLY figured out it's because this motherboard came with an on-board VGA and delivered with an add-on VGA/HDMI board... It's truly annoying... but tapping Window-P (keys) gets me to where I can choose "which screen"... biggest rub being I'm doing it in the blind.
Soooo... I want to get into my PC's BIOS to disable the on-board video... at other times, I'd like to be able to change other BIOS stuff like Boot Sequence, etc. HOWEVER... Win10 seems to have disabled the keyboard (no F2, F12, etc) until Win10 takes control and intercepts. Googled and found several "fixes" but none work.
how I can boot this system... and get into it's BIOS... PREFERABLY directly at startup?
Also, why does SHUTDOWN NOT totally power this machine off?? Hate internal lights being on... keep seeing my Ethernet lights blink... and getting tired of pulling the cord?
View 9 Replies
Aug 24, 2015
I have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then made sure drivers were updated. However, I did not upgrade my BIOs, from the information I had seen from MSFT. Didn't think twice, since they said if you were upgrading from 8 or 8.1 that should not be an issue. The system was running stable, after I did those fixes.
About 1 week ago, after a MSFT Windows automatic patch push, My monitor started not to respond during boot up. Ran some basic troubleshooting for the monitor (Ie: check plugs, check cables, check Video card). They all seemed to work fine and my system booted up normal.
The very next day, cold booted again and monitor did same thing, it was not getting any signal from the computer. Went through the checks, after a little bit of a delay the system finally booted. I checked my BIOs settings, which were all set up normally. I locked my computer after that and did not turn off the system, the next morning, my monitor was unresponsive.
I re-checked monitor, cables and even replaced the video card. Everything is good except no signal to my monitor. I disconnected all hardware except the video card and motherboard, to see if it was an issue with my power. I took out out the CMOS battery and also disconnected power to the motherboard for about 2 hours, to try and reset the BIOs to factory. No luck.
This leaves me with 2 things left:
a) Corrupted BIOs, not loading my drivers, or
b) motherboard went bad.
Going to try a bootable USB BIOs next.
View 4 Replies
Jan 26, 2016
I just got a new gpu put into my computer. A few things were changed around in the settings. It boots fine and everything is good. Except my number lock key use to light up during boot and I would just keep hitting delete which is my mobos command to enter bios and it would go in. Now when booting the numberlock key doesn't go on and just pressing delete doesn't work. It just goes straight into my windows login.
My computer works %100 fine and I just need to change 1 thing in the bios but I can't get into the setup. How to get my numberlock on during boot or to get into my bios? I don't even see "hit del to enter bios" at the bottom of the screen anymore. And my numberlock key doesn't even go on during start up until the windows login. I went into my settings and unchecked the fast boot up option in the power settings menu. Nothing has worked yet.
View 1 Replies
Sep 10, 2015
I have upgraded Win 8.1 Ent into Win 10 Enterprise. While upgrading I had an older version of BIOS. Since then I have upgraded to the latest BIOS version available for my MOBO. My MOBO is ASUS's P8H77.
I can not boot or restart into BIOS from Win 10. I have googled the problem and it was mentioned something about new UEFI method of OS installation. When I am trying to restart/boot using the Advanced Boot option my OS is missing the "UEFI Firmware Settings" option, therefore I can't get into my BIOS.
My questions are:
- All this is happening because I had an old version of BIOS and when I upgraded something got screwed up?
- Does my motherboard support Win 10 UEFI option at all?
- Do I need to do clean install? Is it possible to avoid such option?
Reason for all these trouble: My PC freezes when I leave it working overnight. I do not know how to troubleshoot it because no reason for the freeze is indicated in the Even Viewer. Why the heck my PC freezes? I do not get any BSOD or errors, just a freeze and the only way to reset the PC is to hold down the power button.
View 1 Replies
Nov 24, 2015
Blue screen and error 0xc000021a and the continuous repair loop
DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip
systeminfo.txt
View 9 Replies
Oct 18, 2015
I recently bought a MSI laptop, and decided to update the BIOS.
However after the update my laptop just doesn't boot anything, no USB, no hard drive, nothing.
I already enabled/disabled secure boot, used UEFI etc. and tried to flash the BIOS again, but nothing worked.
View 9 Replies
Sep 28, 2015
i had secure boot up and running on my windows 8.1 machine after a clean install, but now since Microsoft upgraded me to windows 10 it seems as my secure boot is off again, but it's enabled in my bios is so weird, it's enabled in bios but off in windows 10? Is not much of a big deal to me in a since but just wondering why it still shows as on in bios but off in windows 10.
View 9 Replies
Jan 7, 2016
I have a Linx 8 tablet running Windows 10, and despite several hours of web/forum trawling I cannot access my BIOS settings to view my boot manager, either through the Settings/Restart method, or in Safe Mode. I can get to a screen that lets me choose between either UEFI Settings or Boot Manager (by holding the power and the volume up buttons together at start up). Selecting the UEFI option takes me to the expected prompt, but choosing Boot Manager just starts Windows as normal. I simply cannot access my Boot Manager; I have disabled Fast Boot.
View 9 Replies
Jan 6, 2016
I was given an error message on reboot and followed a guide to editing the registry to restart the download. The download did not restart however, and my windows 10 is stuck in an endless loop of rebooting. I have downloaded a copy of windows 10 and put it onto a USB, but when I try to boot from USB it takes me back to the BIOS. The BIOS are 'Aptio Setup Utility 2011', and don't seem to allow me to change from UEFI boot to LEGACY boot, although the option is apparently there. Why the USB boot is not working correctly and how to make it do so, I am more than happy to reformat the computer but at this moment in time it's useless. The computer is an Alienware x51 from 2011. As previously mentioned the operating system the PC is trying to boot (or install) is windows 10.
View 4 Replies
Sep 8, 2015
I finally got around to building a computer and it was working fine until a few days ago I turned it on and something strange happened. Directly after the msi dragon bios prompt screen, when it should be booting Windows, the screen starts flashing white with two black squares on it. It only seems to happen after it has been off for some time, like over night, and after turning restarting it a few times it eventually works. For some reason invidia driver 355.82 does not like Windows 10 try darkbreeze's solution and install driver 355.60.Here is a parts list
i7 4790k
msi Z97-G45
msi gtx960 4gb
evga supernova 550 g2
G. skill Ripjaws 2x8 ddr3
Samsung 850 evo 250gb ssd
View 1 Replies
May 30, 2015
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
View 9 Replies
Aug 29, 2015
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
View 14 Replies
Sep 23, 2015
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
View 8 Replies
Sep 3, 2015
My situation is that after a recent issue with my user profile going "missing" (I think) I thought do, do you know what I'll just reset my system and start over. But windows 10 would not reset. Instead I grabbed the windows 7 disk to reset that later hoping to install windows 10.
I was having problems with my Kingston SSD so I installed it onto my HDD and later on tried to clone the HDD to the SSD and then format the HDD so the OS ran off the SSD. I have clone the 2 drives but haven't formatted the HDD. I tried booting the SSD but it comes up with the BOOTMGR IS MISSING! I find a solution which is to reset the bootmgr using the code "Bootrec.exe /rebuildcd" but I can type the command in due to not being able to access the system repair.
This system repair issue says that the disk is not compatible meaning I cannot enter to the other options to get to the Command Prompt.
View 1 Replies
