I'm getting an alert saying that I need to repair or replace my hard disk and back up my laptop. I've already backed it up. My computer has been having some issues. I thouoght it was something I could fix myself. I had gotten a kernal_data_inpage_error a few time and I thought chkdsk had repaired it then I started to get the hard disk error. Sometimes my computer works fine and sometimes it's practically useless it goes so slow. Since I started getting the hard disk issue my computer has been running smoothly. Smoother then it usually does. What's up with that? I need this for work. Will it hurt anything if I keep using it as long as it's still running and then when it finally does just replace the hard drive? I was thinking about replacing the hard drive anyways to have more space on my computer. Also, could the warning be a false alarm and I might could fix it myself? My laptop is made very weird and the whole stinking paptop has to disassembled to swap out the hard drive unlike my old laptop where you can just unscrew the bottom and bam everything is.
I'm getting an alert saying that I need to repair or replace my hard disk and back up my laptop. I've already backed it up. My computer has been having some issues. I thought it was something I could fix myself. I had gotten a kernal_data_inpage_error a few times and I thought chkdsk had repaired it then I started to get the hard disk error. Sometimes my computer works fine and sometimes it's practically useless it goes so slow. Since I started getting the hard disk issue my computer has been running smoothly. Smoother then it usually does. I need this for work. Will it hurt anything if I keep using it as long as it's still running and then when it finally dies just replace the hard drive? I was thinking about replacing the hard drive anyways to have more space on my computer. Also, could the warning be a false alarm and I might could fix it myself?
I can not install programs or do Windows 10 updates because the Windows 10 Installer is damage. When attempting to install a program or do Windows 10 updates, the installer stops and the progress bar shows no progression of installation. I have the computer during the installation process and come back to the computer an hour later and the progress bar shows no indication of progress of installation. What I can do to try to fix the Windows installer?
I just started using the fast build of the windows 10 mobile of my Lumia 1520. I want to set the text message alert to a custom ringtone but i can't find anywhere to change it.
Every time I boot up my pc I get a black screen with 2 lines of text "disk i/o error, replace the disk and then press any key". After I press any key pc boots up fine. Lenovo pc with Windows 10.
When I built my desktop I plugged a wd green 1tb hard drive so I can copy all of the data from it to my 2 tb green wd
Now I want to unplug that 1tb green hard drive and replace it with a new one? Will that cause system slow? Because windows may thing the drive is still there? No need to clean install again?
I upgraded my Win 7 X64 Ultimate to Win 10 Pro X64 for free of course. I created a Windows 10 repair disk under Backup/Restore. I did the same when I first got Windows 7 years ago. Under Windows 7, I was able to boot the repair disk and easily restore a system image that I take nightly (overkill I know), over the years I used it several times without a problem when my system got screwed up.
I can boot the Windows 10 repair disk BUT it gets to choose a keyboard and I can't choose a keyboard because mouse/keyboard do NOT respond at all. It just basically freezes on that screen.
So I ask a few questions:
- Is there a better Windows 10 system repair disk I can download from somewhere to restore a Win 10 system image that I create nightly?
-- I tried a 3rd party Backup/Recovery product EaseUS Todo Backup, my Dell hard drive has 2 partitions (a dell MBR partition and the actual C drive), it backed up both partitions but that recovery disk didn't show both partitions to recover, only the MBR partition which was useless to me of course.
Is there a Simple backup software just to copy the C drive 1 partition where my windows system resides, have a recovery boot disk that boots (EaseUS boot disks booted by the way) and to restore just the C drive partition that works under Windows 10?
Windows 10 Disk Usage is 100% Its so slow that its unusable for me. I tried startup repair with and without the CD and it fails with the Log saying its due to an incompatible OS. Note: I can only use my PC in safe mode and I just recently upgraded from Windows 7 a few months ago.
I've been having problems recently with my laptop (Samsung 7 series) freezing. I then get a pop up saying "windows has stopped working", and it either unfreeze after a few minutes or I need to force close it.
This happened again yesterday, and wouldn't unfreeze so I force turned it off. Upon restarting, I got a BSOD with the message "critical_process_died", and the laptop restarted itself, only to BSOD again. Now when I turn it on it goes straight into disk repair for C:, saying it is scanning for and repairing errors. However, even after running overnight it never progressed beyond 9% on this, and now I cannot exit the loop without force closing the laptop - but when I reboot it goes straight back into disk checking.
A recent AVG scan was clean, and I cannot recall an update that happened yesterday. Unfortunately. Unfortunately I cannot load up the laptop to even check anything. Hopefully this is a software issue and I can get it fixed at a tech store, but I'm worried it could be a hardware problem (Internet suggested there was some memory corruption?).
Although not a specifically Win10 message the regularity with which the message appears since updating to Win10 is beginning to annoy me. My set up has a small allocation to a recovery drive for the PC, a relic from a prior setup. I could probably delete the partition and merge it with another but for now it doesn't use up much space and happy to leave it except... Every so often I get a system message that says I have low disc space on this drive (in fact no space at all) and I want to stop the message from appearing, I know it is low on disc space and don't need to be told every half hour. how to stop it?
Also I do need to get into the depths of the OpSystem to start to understand privileges etc
I could not load a disk with OS software and received this error message. "Disk has MBR Partition Table. On EFI Systems, Windows Can Only Be Installed On GPT Disks".
Since upgrading to W10, My puter will no longer load when I have my external hard-drive attached. When I switch on my puter, I get a black screen with the message 'Non-System disk or disk error, Replace and strike any key when ready'.
When I reboot with the ext HD disconnected the reboot is fine and W10 loads no problem. If I reconnect the Ext HD while the puter is up and running, no problem, and both the computer and now attached external hard drive function perfectly.
I have tried reformatting the external hard drive but I still have the same start-up problem when the ext HD is attached on start-up.
I upgraded from Win7 to Win10 when 10 was made available. I run 4GB RAM, A core2 6700 2.66 cpu, 64 bit, Comodo Firewall, spyware & antivirus. I did not notice this constant running of the HD using Win 7 with the same software.It seems something is demanding constant harddrive use at or near 100% much of the time. Some of the time there is such a demand the HD seems to be screaming for mercy.
I have checked for viruses, trojans, spyware and disk errors with nothing foundI use both online and offline malware check systems... nothing is ever found. I like the layout of the new Windows but I do not like all the demands it makes on the HD & CPU when I am trying to use it. Task MGR indicates CPU and HD usage is high usually above 30 percent for CPU & above 90% for HD.
I need to replace my failed system disk with a new one and wonder how I can go about installing a new win 10 bought and downloaded from Microsoft. I imagine the process would be the same as for a new custom built computer. I miss being able to buy a Windows on a DVD.
Since upgrading to Windows 10, I have been having issues with constant high disk usage, I've googled and not really found any solution, I have disabled some features but hasn't made any difference.
I do run McAfee and I cannot end its processes to see if that is causing the problem but I think it is something else. Unless it is something within mcafee causing it I am unable to stop most of the processes.
THis issue is causing computer to be sluggish.
System is Intel Core i5-4440 3.10Ghz 8GB Ram 1GB NVIDIA Graphics 1TB Hard Disk
So I have a 200 GB Hard Drive on my computer. A couple of days ago I got a notification mentioning there was not ten GB of space left. I was surprised, but I assumed I just had more on it than I thought. However, since then I have re-installed Windows for my own reasons and was surprised to find despite removing all documents and applications in the re-installation, I only had 90 GB free. This leaves 110 taken up by an unknown cause. I could not find many large files in file explorer when I searched for large files (file:gigantic).
I am trying to delete a folder on an external hard disk that was created on another computer. First it tells me that I need administrator permissions to modify it, which I grant. Then it tells me that I need permission from dougal obert to do so, dougal obert being my own user account on the machine I am using. I have given full control in the security settings both to administrators and myself, but nothing will enable me to delete this folder.
My computer (Asus transformer Aio) is very slow, it takes long to open a window or browse internet, or wake up from the screen saver. The hard disk is working non stop, the light is on all the time and I can hear it.
I tried to clean it with windows tools (defrag), and ran CCleaner and Malwarebytes Anti-Malware but they didn't find anything wrong. I just launched the Windows Defender complete analysis. The basic one says nothing wrong as well.
Two nights ago, I had a brief power outage at my house. Since then, my Windows 10 preview installation will not boot. It keeps giving a boot disk error. I first tried booting from my Build 10166 disc created from ISO and running the startup repair. I've seen errors using this tool on previous Windows versions, but the computer quickly rebooted, so I thought it was successful without errors. Nope, I still get the boot disk error message.
I booted again with my installation disc and tried running the "Refresh" option. This time, I get a message that the drive containing my Windows installation is locked and that I should unlock it before trying again. How I can unlock the drive? Unless I figure that out, it sounds like I will have to perform a clean installation.of Windows 10, which I don't really want to have to do again.
My old Windows XP Desktop stopped running 2 weeks ago, with a No OS Found error. Since then I've taken the hard drive out and connected it to my new Windows 10 desktop with a USB 2.0 to SATA Adapter. It does not show up in "My Computer", but is detected in Computer Management.
The drive's an old Western Digital WD2000 one, and started clicking (for a few seconds) as soon as I attached it to the PC w/the USB Adapter. The clicking stopped after that.
It shows up as "Disk 1, Unknown, with the amount of data on it (186.31 GB [out of 200]), and is Unallocated. I've already tried numerous utility and Data Recovery programs, such as Recuva, MiniTool Partition Wizard, EaseUS Data/Partition Recovery. No luck with these.
They were either not detected, or didn't find anything. MiniTool Partition Wizard said it's a "Bad Disk" I
Partition Find and Mount is still conducting a scan which has been going for the past 7 hours (35%).
BTW - I really can't leave the hard drive on for the night to conduct a long scan. It's been overheating, and I already have a large fan next to it to cool it down. It's not safe to leave this on for an extended period of time.
Only to find out I bought a USB 3.0 Adapter instead of a 2.0 my old XP supported when It still ran.
I saw threads about people complaining that their audio and mouse is lagging, but in my case, it happens when I download something with bittorrent or when I'm installing something.
on Win 8.1 and Win 7 I have no problems playing games while something is downloading in the background, now on Win 10 64bit I can't even normally play music either on youtube or on windows media player.
Hard disk usage is hardly 40% and starts cutting, and cpu is not more than 60%.. But when I download something from Bittorrent or when i'm installing, a process named "System Interrupted" pops up in Task Manager and consumes CPU(10%-20%).
My audio is realtek, and it is updated (22-09-2015) and so is my graphic card and everything else. I saw that process "System Interrupted" is usually visible when there is a driver problem.
I have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
I have a laptop that came with Windows 8.1. The hard drive failed and has been replaced with a new hard drive. If I want to install Windows 10 on this laptop, do I first need to install Windows 8.1. and then perform the upgrade to Windows 10, or can I just install Windows 10? Will Windows 10 use the Windows 8.1 license key in the BIOS to activate? Or will this not work unless I first install Windows 8.1. and then upgrade to Windows 10?
This computer has never had Windows 10 on it.
The computer has a new unformatted hard disk that has never had Windows 8.1. installed.
Is it permitted to install the backup image of Windows 10 to a New bigger hard disk in the same PC. After that I will use the new hard disk only and format the old one.
