Response following sfc scan, windows resource protection found corrupt files, but was unable to fix some of them. I have the CBS log, but don't understand any of it.. I looked at an article that said replace files with a new copy, and I didn't understand that!
Attached Files
sfcdetails.txt 222.12KB
dism.log 348.56KB
After scannow, i have : Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogsCBSCBS.log.....
what should I do with this ?
just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?
I looked up the log on my system but it's just a really big lump of text.
Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.
CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)
[code]...
Does SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.
View 2 RepliesI have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC. The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found. I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
CBS Extract.txt 27.04KB
I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 Replieshave tried a number of commands and started all of my services.
View 9 RepliesI ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
Program files (.exe) which are not installed (and so don't have a shortcut) are not being found by Windows search. Shortcuts, folders etc with the same name all show up.
Indexing is complete and .exe is defined (as default) in indexing options to Index Properties Only using the File Properties Filter. If I open up the old Windows 8 fly-out style search then .exe are found so they must be in the index.
I found this thread which is the same [URL] .... but the HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFolderTypes registry key doesn't exist in 10.
How to make this work in the normal Windows search? (I'm not interested in any third party search tool).
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
View 1 RepliesI connected the printer to my computer and I'm able to print pages from a browser, my problem is I'm unable to access the printer directly to scan files. I've tried deleting and re installing that didn't work. The printer is an HP Deskjet 3050 ...
View 3 RepliesAfter almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 RepliesI've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.
I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.
As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.
View 4 RepliesI ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
can some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...
Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
I am currently using Windows 10 Pro 64 Bit. Is Windows Defender enough for my PC protection, or would I have to install any other one? I regularly take all the upgrades Microsoft provide me for the PC.
View 1 RepliesI keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
Microsoft windows system protection setting won't let me click on yes. Only the no button light up.
View 1 RepliesIn Windows 10 v1511, I noticed that if I disable the real-time protection of Windows Defender, when I reboot the system, this protection comes back on automatically.
View 6 RepliesI updated to windows 10 and I couldn't find any of my files. Eventually found them moved in a folder. Once I restarted my computer, all of the files were gone and I had more storage on my computer. These are files as in music, movies, and pictures. They are NO WHERE to be found.
View 2 RepliesI believe it's called adding it to the context menu.. I saw a registry hack for Windows 8 but i'm not sure how to do it in Windows 10.. I got used to using MSE in Windows 7 so now i'm lost not being able to right click a file to scan it immediately.. how to enable this in W10 Defender?
or should I just dump Defender totally for another Free antivirus? I was using Avast for awhile but MSE was less heavy on the resources so I went with that..
I run a scan but as soon as I have rebooted and within an hour or so it asks me again? I receive the notification in the taskbar and Windows Defender turns orange and states I am unprotected. So far I have completed 3 clean scans today but after a reboot it is as if it does not remember that I have run a scan. I am running the latest Windows 10 pro.
View 4 RepliesI'm presently using (running) Avast Pro and Malwarebytes Anti-Exploit-Free, with weekly running of CCleaner, Malwarebytes Anti-Malware, and AdwCleaner. I do a lot of browsing and haven't had any problems with this approach. However, I got the hankering to also keep Windows Defender up-to-date and to occasionally run its scan just to see see if anything comes up.
So, I go to WD with the expectation that it is turned off and find that it may not be. I would go to update&security>windows defender and find, to my surprise, that real-time protection and cloud based protection are turned on, but grayed out. Furthermore, when scrolling to the bottom of the screen and clicking Open Windows Defender, I get the message that "WD is turned off and not monitoring the computer." I then went to Brink's WD tutorial (Windows Defender - Turn On or Off in Windows 10 - Windows 10 Forums)
