I completed upgrade from Win 7 to Win 10. So far everything seems to be working great. I have a Macrium image of my C drive with Win 7 on an external HD. Can I create a new partition on my C drive and restore my Win 7 image there? That way I can dual boot to either OS. I have done some research and it appears to be a relatively easy thing to do, even for a computer dummy like myself.
View 8 RepliesI tried one again to use Macrium to backup only C:, clean install then restore only C:.
Once again it did more that I asked it to and removed the 16MB partition created by the clean install.
After clean install I had this, 4 partitions on Disk 0 (SSD):
After restore I had this, 3 partitions o n Disk 0 (SSD):
I did not run the Macrium fix boot option after the restore so when I rebooted Win 10 ran Auto repair then the system booted up normally.
Why is Macrium doing this?
Guess I'll ask in the Macrium forum and see what I can find out.
The reason I'm doing this is is Shift Restart from Power is not working, it just boots normally.
I just redid the steps in Brink's tutorial to setup Recimage, then ran reagentc /setosimage /path "locationResetRecoveryImage" /index 1
I'll try Shift restart again now and see what happens.
Windows 10 Home.
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
Is it possible to restore a Windows 10 system image taken from a 60Gb SSD to a new 240gb SSD on the same computer?
I am thinking of using the windows 10 installation USB to boot then repair to recover the image onto the 240Gb SSD.
Would this work? Does partition size affect the new 240Gb SSD?
The system is already licenced for Windows 10 and nothing has changed other than the SSD volume size..
The VERY last resort is to install over again with all programs, tweaks, etc..but, I'd rather not.
How do I reinstall Windows 10 from a USB Disk Image
View 2 RepliesI have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
View 9 RepliesI Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 RepliesBecause of a problem with 10 a tech told me to revert to 10270. I backed up everything important to my D: drive first. I did a complete formatting of C:. Then upon installing 10270 onto C: I first blew away the partitions on D:, realizing what I had done just after hitting the keys.
I have run Easeus's free Partition Recovery software but it finds absolutely nothing, even in deep scan.
Is there another reliable method with which to attack the problem of restoring the partition tables for D:?
SP3 has been acting a bit funny lately and went to restore and it says the recover partition is missing. I am pretty sure I never deleted it.
View 3 RepliesI have an Asus UEFI mobo on my custom-built desktop, a few months old.
B150M-K D3
It has American Megatrends firmware
Today I restored my system from a macrium reflect system image. I went back only 2-3 hours in time. After rebooting, windows started up fine. But the bios reverted to its default settings, although I had previously tweaked it a bit.
What's more, I can't get to the bios menu at all. I mash the delete key at startup, and I just see a blank screen. Even an hour later, just a blank screen.
This happened to me not so long ago, but that time, the bios screen did eventually appear, and with a little patience I was able to tweak the bios again. But this time it is more stubborn.
I also feel that the boot process is slow. I see the asus advert, and it coughs a couple times and drags on until I get to the windows boot menu where I choose if I want windows 10 or macrium reflect recovery environment.
I very often restore from a system image, and every time, it makes a new bios boot entry. I have dozens of boot entries by now in the bios boot menu. Maybe that's causing a problem?
The fan is unusually loud, although cpu usage is low, just 0-2 %
I have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
Do i have to remove windows 7 from my computer before i can system image W10 ?
View 1 RepliesI have a Sandisk Cruzer 64GB USB 2.0 thumb drive and I was wondering if it's possible to create 2 disk partitions and install some boot menu to allow me to choose either the Win10 ISO partition or Surface Book Recovery Image when I boot to USB in UEFI?
View 9 RepliesQuestion; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 RepliesI have a DELL-XPS13 Laptop. After upgrading it from win8 to win10, i noticed a restore partition is getting showed up in explorer as Z drive.
When I open Disk Management, i do not see this Z drive assignment to the drive.
I do not know how I can hide this drive.
Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?
I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...
would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...
I had win7 and upgraded to win10. HOW do I go back to win7 ???
View 8 RepliesI installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point.
Source: %ProgramFiles%WindowsApps
Destination: Appxstaging
An unspecified error occurred during system restore. (0x80070057)
upgrading a Vista PC from a hard drive that came out of my Win7-Win10 laptop. (The laptop mobo-gpu burned up)
I want to upgrade the Vista PC to Win7-Win10 because apps I use run better on Win7-Win10. Also, MS will support Win7-Win10 longer into the future than Vista.
****************
The Vista PC is a Gateway DX4710-09
(about 5 years old, works great)
Vista Home Prem x64 SP2
586 gig hdd with 435 gig free
6 gig ram
Win7 Update Advisor says OK to upgrade.
*****************
The Win7-Win10 laptop HDD came from a Gateway NV7310u
(about 4 years old, the hdd works great, the laptop mobo-gpu burned out)
Win7 Home Prem x64 successfully upgraded to Win10 via the free upgrade
250 gig hdd with 125 gig free
******************
I made a DVD of Win7 sp1 x17-58997.iso
******************
I have a Sabrent USB-DSC9 hard drive adapter
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to me that I could do a System Restore to when the program was still on this laptop & all would be returned as it was.
The first 2 times I tried was a total fail for returning the program but when I went back to a week ago it was there. Something is missing & it errors asking for the old install software that doesn't exist anymore (the program was purchased it 2008).
I have recently had to re-install Windows 10 and had problems before so decided this time to do a clean install and then run the system image backup. This went well but when it came to the testing of the restore a problem arose. I was using the Repair Disc created after the system image backup completed and could not understand the source file indicated was not where I had put the backup.
The restore said the file was on the C: drive which was what I was trying to restore to.
I'm trying to rollback to Win7 after Win10 update. I've got some hardware that I want to use that's not compatible.
I've tried going to recovery and 'Go back to Win7' but it's telling me I need to delete the users I've created. The problem is that I removed the original user from Win7 so it wants me to delete the two users I created with Win10. Is there another way to uninstall? I know I won't be able to delete all users and I don't know how I can recreate the original account.
I do have a backup of my windows 7 install before I upgraded. Is my license still going to work or will it be inactive due to the upgrade?
Using an Asus CM8730 desktop with Win7. Purchased a Samsung Evo 850 SSD and used Samsung Migration software to move Win7 to the SSD from the HD that came from the computer. All went well, the computer boots very fast from the SSD. After about a month of use I decided to upgrade to Win10 but each time I've tried I got the same message: "Windows 10 couldn't be installed. We couldn't update the system reserved partition."
View 1 RepliesI installed Windows 10 dvd on an old notebook which was running vista(it means I cleaned the hard disk and installed Windows 10 dvd). However win 10 has a minor problems. I'm an insider, so I checked build 10240 and 10547(upgraded last week by windows update). When I checked with showkeyplus, it says "Windows 7 OEM marker present in firmware". I suspect it be embedded in SLIC, but I don't know how to get rid of the "marker".
View 9 Replies