I have tried out a few different monitors recently, but I just settled on the one I want to use. All was going well but after it wakes from "sleeping", the windows are being resized and moved. Perhaps there is some issue with drivers from the other monitors messing things up?
View 1 RepliesSystem: Intel NUC 54250WYKH
Monitor: Acer T232HL (1920x1080)
OS: Windows 10 Pro (clean install)
When my NUC wakes from sleep mode, existing windows are sized and positioned as if the display resolution had changed to a much lower value (e.g. 1024x768) during sleep but was restored to 1920x1080 after waking. The windows are smaller and positioned in the upper-left corner of the display. This happens with any program I have running when the system goes to sleep (e.g. File Explorer, Visual Studio 2015, etc.).
This problem didn't happen with Win8 on the same computer.
I did a fresh install on a SSD not to long ago. The computer is running very smoothly for the most part. However, sometimes when I open the lid to my laptop, it is temporarily unresponsive for a minute or so when resuming from sleep mode. It's pretty annoying. I think it has something to do with my USB settings because it only seems to do it when something is plugged in there. For example, thumb drive, external hard drive.
I tried playing with the settings in power settings. I have turn off hard disk set to never. USB selective suspend set to disabled.
I upgraded from Windows 7 "Starter Edition" (32-bit) on an ASUS Eee PC 1005PE (2GB RAM) to Windows 10 32-bit. This mostly seemed to work, however I can no longer resume from either sleep or hibernate. In either case, I get a blank screen. The other problem I notice is that the task bar separator (with a scroll bar type widget) between the active tasks and the notification icons seems to disappear and the active task icons seem to get mistakenly hidden from view. This is a minor annoyance and something I can live with, simply by switching periodically to the "Task View". But I would really like resolving the wakeup from sleep problem. So far I have tried updating the video adapter driver (which was already "up to date"), and I checked that I have the latest BIOS firmware.
View 3 RepliesI have 3 monitors connected to dual NVIDIA GeForce GT640 video cards.
The MB is ASRock Z77 Professional-M with Intel i3-3220 @3.3ghz
Windows 10 Professional 64.
When I manually put the system to sleep and come back later in the day and tap the spacebar to start the system back up again, the system spins up but I have no display. It seems the only way to get it back is to power down and back up again.
Since upgrading from Windows 7 x64 to Windows 10, my monitor/display on my desktop will no longer go to sleep/turn off after the scheduled 5 minutes. I had no issues with this in Windows 7. I have updated the BIOS, video drivers, USB wireless mouse driver and anything that could be related and no change. All i want is for the monitor to turn off after the set time. I don't use a screensaver. There is no driver update for the monitor (Viewsonic VX2450). I've also tried uninstalling the monitor driving and reinstalling but no change. Seems like the system also will not sleep when set to sleep.
View 3 RepliesAs the title states, my computer will turn off the display or go to sleep (not sure of correct terminology) when I go idle for a short period of time. For instance, I get up to get a glass of water and when I come back, the screensaver is up and I need to re-enter my password. This problem arose immediately after the installing of windows 10 on my PC (upgraded from Windows 8.1).
I have already gone to control panel ~> power options but the thing is, even though I've already done that and set the options to "Never turn off display", "Never go to sleep" as shown in the screenshot, my PC still turns off display/sleeps after a short amount of time.
Ever since the newest major update, my PC has stopped resuming from sleep. It'll boot up (I think) with the keyboard and mouse lit up but the screen always stays black. Takes a hard reset to get it running at which point the sleep data is gone and wasted. I've had allow hybrid sleep on or off, had USB suspend enabled and disabled, disabled fast boot and hardware fast boot. I changed a lot of settings I thought would be related and nothing. Nothing makes the slightest difference.
View 9 RepliesWhen I resume from hibernation. It goes thru screens asking if I like this one.
View 1 RepliesMy laptop acer4750 resume very slow after hibernate, it keep showing windows's logo and not run to log-in screen anymore. Then i need hard-reset every time
View 2 RepliesI use desktop PC x64 based amd motherboard.Upgraded from windows 7 -takes longer than usual but sucessfully.My boy was happy because nothing changed in programs and games he use to play.All fine few days than once in the morning found a massage on start up "Resume from hibernation" I was waiting for resume for a while than hour than day and nothin happen.
Next day have to do some tries to fix.Looks on forums for similar problems...someone mantioned about ram slots to clean from dust and i tried that but still the same.In opened PC i tried ti figure out what else could be if everything in hardware is just fine.Than look for graphic card -pull it out and again in.And still nothing happened.Than found some older graphic card with lower values and restarted.On restart it appears on blank screen that graphic card is beiing updated and than bingo! windows continue to install updates and after several restarts it was all done.Got it back and problem solved.
Tried to disable automatic updates on settings but read about that windows 10 does not have option to disable that,rather only ask user to automatically or not to install updates.I do that what i could.Still that not convince me to keep win10 rather to roll out to previous version-but my boy was yelling on me to not to lose all stages in games and OK.
nEXT morning same.resume from hibernation.ok i said now i know what to do-removed graphic and put older one.And this time there were no update for graphic just continue to resume from hibernation Now i removed that older one with better one from my other pc with higher value graphic card--and after restart there were also no updates in bios and continue to "resume from hibernation" than i tried something else.Assuming that is windows placed on hard disc -remove that hard disc and plug it new one.
That for god sake it still resuming in light blue screen from hibernation.I mean which part remember that process if not hard disc. To not talk about that dvd disc rom is disabled and bios is disabled and only keys works on keyboard is ctrl+alt +del to restart.And that was the time was my pc was virtually died allthough each peace of hardware is 100% healthy.Last thing i remove all pieces from its slots and motherboard too.Leave it through the night and again in the morning plug it all.And again technically works fine but message still resuming from hibernate.
I have bought a Lenovo yoga 2 pro 2 weeks ago and upgraded win 8 to win 10 almost immediately. I have had this issue for some time, when I install some software. Some buttons are blocked or the text is too small. I have been having resolution problems as well which I solved by adjusting it but this issue doesn't go with changing it.
Here what it looks like .....
So i just upgraded from Windows 7 to Win10 a week ago and everything went smooth as silk. I will said this is the first time i can remember doing an in place upgrade, I always format and do a clean install about once a year but ive been busy so i took the lazy route.
Issue is i have my power settings set to None and my power options set to turn the monitors off after 10 minutes. I have it set to Never sleep. After the 10 minutes passes the monitors power off as expected but when i move the mouse or hit keys on my keyboard it takes at least 10-15 seconds to initiate the monitor power on. This was 1-2 seconds in Windows 7. Its pretty minor but its irritating as hell.
I have been using Win10 since July. It has been working fine. Just recently I noticed a blue screen at boot up stating, "resume from hibernation". I have never used hibernation in my life. Sleep mode, yes. Hibernation, no. But I have an SSD and don't use sleep anymore. I do a full shutdown every time. I noticed the same issue on my Dad's Win10 computer.
The reason I am asking is I want to boot from a USB flash drive, but "resume from hibernation" will not allow that.
I went to see my daughter and after she resumed her computer from hibernate (it had been off for about 2 days) a message popped up saying its ip address had been detected in use by another computer.
I suspect it was my cell phone that when in range asked for an ip address and the router, thinking the hibernated laptop wasn't using that ip address any longer gave it to my cell phone. Then after her system resumed from hibernate, it continued to use the ip address it had when it hibernated.
Does windows renew its dhcp ip lease on resume? Can it tell if the lease expired?
When searching for settings from either the control panel or the settings app, nothing appears. See attached image.
View 3 RepliesIf I use the Window 10 Upgrade System Tray Icon to do the download then it will auto-resume with no data loss if the internet connection fails. If I try to download Win 10 Upgrade some other way then it does not have auto-resume and I'll lose the data and have to start over.
I have 3G cellular internet here in India. It is unreliable and slow and often drops out. So auto-resume is an absolute necessity if I want to successfully upgrade to Win10.
I'm running Win10 Home on an i5 5th gen laptop. I'm trying to download the big new Win10 update but I live in India and my internet is unreliable. Does the Win10 download auto-resume? I can't tell. Does the download pick up from where it left off if the internet fails? So far I can't tell one way or the other.
View 3 RepliesMy plan is soon after I get the Win 8.1 laptop to download and install Win10. Here 3G cellular internet is slow and unreliable. I'm scared that if I try to download Win10 it will fail and I'll have to start the download from the beginning.
Someone told me that the Win10 download includes the ability to auto-resume so that if a download fails it can re-start from where it left off once the internet comes back. Is that true? I need to get confirmation on this before I get my new Win8.1 laptop.
If Win10 download really does have auto-resume capability then I can do the Win10 download and resume as needed if the download fails. without losing data.
How to confirm that Win10 download has auto-resume capability so downloaded data is not lost.
I get this error on a Surface Pro 3 which I have updated to Windows 10. It normally occurs when playing Minecraft, anywhere from 5 minutes to 1 hour after opening. I have attempted to update the drivers, but it says that the drivers are up to date (which is odd as I am using Windows 8 drivers on a Windows 10 machine).
View 1 RepliesI'm having this issue for a few months already. But today I probably made it even worse.
Here is what happens:Until yesterday I had Windows 8.1, and sometimes (One day every 1 or 2 months) I would get a BSOD when trying to play some games. I would get an error on the BSOD saying: "Your PC ran into a problem and needs restart. We're just collecting some error info, and then we'll restart for you."... "If you'd like to know more, you can search online later for this error: VIDEO_TDR_FAILURE(nvlddmkm.sys)"
After that BSOD, my PC would restart. And then I would not be able to start any game. The screen would froze, the game would close, and I'd get the following error: "Display driver NVIDIA Windows Kernel Mode Driver, Version 350.12 stopped responding and has successfully recovered".
By that point I would not be able to play anything else. After getting that problem for the first time (A lot of months ago), I discovered that the only way to "fix" it was to do a System restore to a few days back. By doing that, everything would go back to normal for a few weeks, maybe a month... and then it would happen again (BSOD, followed by restart, followed by games not opening, followed by a system restore...)
Well.. today I experienced the same thing.. BSOD.. restart.. error... tried to do a system restore, and this time it didn't work... So I decided to try something different and updated my Windows 8.1 to Windows 10, hoping it would fix everything..As soon as Windows finished upgrading, I got a BSOD, a restart, and after that I can't open any games... Now I get the same message as before, but with a different driver version (When windows upgraded, it installed the most updated driver I believe)... I had an old version on windows 8.1 because that fixed the problem a few months back...
Well.. right now I'm experiencing the error: "Display driver NVIDIA Windows Kernel Mode Driver, Version 353.54 stopped responding and has successfully recovered".And since I just upgraded to windows 10, I can't really do a System Restore anymore...
Windows 10. NVIDIA GEFORCE GTX 860M
This issue's surfaced for me since this morning. Whenever I put Windows to sleep, either manually or closing my lid, it shuts down the instant I start it back up.
View 4 RepliesI had problem dual booting win7 and win10. After many attempts I was able to dual boot.
But in the process, I deleted "system reserved" partition. So windows want start. I performed start up repair and it solved the problem. After that I reinstalled win7 ultimate which create "system reserved" partition again.
But the problem is hardware wan't shut down, hibernate or sleep. Windows shut down properly, but hardware remains active. I have to hard shut down it by pressing button.
Laptop model: HCL ME ICON L 1015
System Event log:
critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
a few days ago I updated my 64 bit windows 7 ultimate to windows 10 pro, and ever since then whenever I put the PC to sleep and try to wake it the PC tries to start but the screen remains black and after a while a BSOD will appear (now with a sad face on it... amusing...) stating driver_power_state_failure, it happens consistently and only under those circumstances (at least for now) I tried running the driver verifier (as explained on other posts BSOD on sleep, DRIVER_POWER_STATE_FAILURE - Windows 10 Forums) and followed the tenforums tutorial, but nothing in particular happened
I use the sleep function a lot and I cant have it like this.
I had installed Windows 10 for over a week now. The issue of windows not sleeping after sleeping once after startup from a shutdown has been going on for a couple of days.
I've been through many of the power options that deal with what devices wake up the computer, and I have turned them all off at one point which did not work, Windows 10 still refused to sleep properly after sleeping once.
I've went to power options and made sure that the sleep button makes the computer sleep, but it still refuses to sleep after it slept once. I'm really unsure where to solve this, and I don't think this issue has been addressed with Windows 10 yet. Perhaps this is a bug?
A few days ago I updated my HP Envy laptop from Windows 8 to Windows 10. I used to be able to close the lid and the computer would enter sleep mode, and come out of it when I opened the lid. After updating, it now goes into hibernation mode when I close the lid. In the Sleep and Power Settings, the only options available for me to choose for when I close the laptop lid are "Do Nothing," "Hibernate," and "Shut Down."
Following recommendations for similar issues, I updated the driver for my display adapter. Unfortunately, this hasn't changed anything. I've noticed, however, that in the Device Manager, the symbol next to the Intel(R) HD Graphics Family has a little exclamation point in a yellow triangle. Under the display adapter Device status it reads "Windows has stopped this device because it has reported problems. (Code 43)"
In addition to finding no mention of sleep mode anywhere on my computer, I'm now unable to change the screen brightness by any means. I read somewhere that I can allow sleep mode by changing something related to the BIOS? This sounds complicated.