The error code I received told to me to empty files and then "Run the command prompt as an administrator"? Then, type wuauclt.exe/update now??......I don't know what run the command prompt means. I have no skills.
View 2 Repliesi have to get windows 10 update in my PC update feature though my PC having all the needs to install it
View 2 RepliesUse of Opacity setting for Command Prompt on the Experimental tab?
I've tried it at many different settings and I just can't see a use for it.
Tapping F8 or spacebar doesn't do anything ?
I want to boot to command prompt only. I need to rename my user folder, in an attempt to get it named correctly, after the clean upgrade decided to drop the last character, which now gives me a girls name..
Doing it within Windows gives me an Access Denied.. Doing it as a local account, gives me an Access Denied.
Was going to give it a shot outside the OS. and at the recovery prompt, using just the REN command.
Then booting back in, (ignoring the plethora of errors) mess around a little in the registry, have my Microsoft account sync itself back to the correct path, then go for another clean install.
I can not open command prompt. Every time I open it I got error message come up.
The message is said [ The application is not start up right Press OK to close]
When I try to open a COmmand Prompt via
shortcut on task=bar
cmd.exe from Run
Command Prompt from Start menu
I get this:
whenever I try to open the Command Prompt in Win10 (cmd.exe) I get the following pop up: cmd.exe - Application Error The Application was unable to staart correctly (0XCoooo142). Click OK to close the application.
I should add this was an upgrade to Win10.
my Dell Latitude E6520 laptop, I can open command prompt (Normal and Admin), but can not close any of the CMD windows I open unless I go through the Task Manager and shut them down. I do not have that issue on my desktop, which is also running Windows 10 Pro. The laptop is the only Windows 10 device I've run across that has this issue. It is just incredibly aggrivating that I have to go through the Task Manager just to close the cmd windows
View 2 RepliesI have been unable to find a reference to describe all of the current commands supported by the Windows 10 Command Prompt. Is there someplace that this exists?
When trying to recover from a system crash the old commands to create a bootable hard drive to restore to are not there as far as I can tell, I found the DiskPart command and all of the supported commands for that on line but am struggling to understand what all is in the new Command Prompt.
So I attempted to remove the stupid passwords using the "Run" app and entering "netplwiz". I somehow managed to instead remove my admin options and the password is still in effect... I attempted to go back to the "Run" app but when it asks if I would like this app to make changes to my computer, the only option is "No". Yes is grayed out and there is no place to put a password.
I also tried the Command Prompt. I right click and choose "Run as Admin", it again asks if I would like to make changes and the only option is "No". So I tried typing "net user administrator /active:yes" I get access denied system error 5.
I have tried logging out of the current account, but it looks like the current account is the only account on the computer. I can't even run my virus protection because it asks to make changes to the computer and "No" is the only option. I tried Windows support but they referred me to technical support and the wait is over 3 hours.
For some reason I cannot open the command prompt in Windows 10. I could before, but for some reason this morning I could not.
View -1 RepliesIt is saying they are not recognized here is my path location
[URL]
Can you delete wake timers from the command prompt? I am thinking specifically of wake timers created by Update Orchestrator, which cannot be permanently disabled no matter how many settings you alter (and believe me, I have spent hours and days trying to permanently stop my machine being woken from sleep by this nonsense).
At the moment all I can do is run powercfg -waketimers from an admin prompt before every time I put the machine to sleep, and if I spot a wake timer I then have to rummage around in the task scheduler to find the offending timer and turn off waking yet again for the zillionth time. Ideally I would like to automate this so I can just put the machine to sleep at the touch of a button as if I were dealing with a user-friendly operating system.
This evening I tried to get into command prompt by right-click " run in administrator " This part had no problem but after this --it's not. What I am trying to fix MBR issue on my laptop. I found the link that I search on Google and tried it. Here is the link below:
How to fix MBR issues on Windows 10 Technical Preview Installation : Solved - TechDiscussion Community
Now when I type bootrec.exe /rebuildbcd and hit enter. Then I got the error message and look below:
bootrec is not recognized as an internal or external command, operable program or batch file.
So is Windows 10 not recognize with that word " bootrec " and what is the other word for this. How to fix MBR issue in Windows 10.
I have just used the SHIFT-Restart option to activate the Windows 10 Troubleshooting and tried to open a command prompt. It asked for a password. I entered my password but was told it was incorrect.
I booted normally using the PIN I normally use, and went through Settings | Accounts | Sign-in options | Change to change my password. In the 'Old password' box I used the same password that had just failed to get me into the boot command prompt and it allowed me to change the password. It said I had successfully changed my password.
If I use SHIFT-Restart again, I still cannot get into the command prompt using the new password.
Am I dealing with two separate passwords here? If so, how do I change the one associated with the boot command prompt?
Note that when trying to boot to the command prompt, the displayed use name appears to be correct - i.e. it is the same one listed when I use my PIN to boot normally.
so I bought and upgraded to windows 10 today. All day long, at random intervals, I have a CMD window opening up and closing itself almost instantly with about 6 lines of text.
Unfortunately it happens so fast that I can't catch a glimpse of what it's really doing. Are there any methods of disabling CMD from being launched(i doubt it but hey) or is there any way to figure out which process is causing this? any log file I can check?
It's incredibly frustrating because it minimizes whatever I'm doing.
SPECS: [URL]
I changed the attributes in c:users and now all the files are hidden. It also resulted in not being able to access the command prompt, making it impossible to change the attributes back.
View 12 RepliesIs there a way to use the Command Prompt on Windows Repair Disc without a working keyboard?
View 2 RepliesNoticed this A.M. just after my laptop boots up and I sign in,it loads my desktop and then a mysterious command prompt windows appeared for about 3 seconds (not long enough for me to see what it was) and then disappeared.
I've downloaded nothing on my machine,and I've done the SFC scan as well as the check disc scan and nothing was found. I've also run Defender and Malwarebytes and she's clean...
Would this event show up in the log files or event viewer ..Trouble?..and if so what might I look for?
My Windows 10 computer has been freezing/crashing frequently recently (HP Pavilion 500-123ea). I got some good advice to try running the sfc/scannow diagnostic process to try to resolve the problem. However it gets up to about 56% and I get an error message: 'Windows Resource Protection could not perform the requested operation'. And there's no elaboration beyond that, so I don't really know what's going on.
The computer is continuing to freeze/crash in Word alone (no Web) and while browsing eg on Yahoo, Yahoo Mail etc. I've run PC Health Advisor software which suggests it's not fragmentation, nor RAM, nor registry issues, and the monitor looks OK.
This might seem like an obscure problem, but I think if it could be resolved it might stop my system from crashing, so I don't know. I should add that I tried 'Dism' and that's OK.
My command prompt and batch files have stopped working, I'm a programmer, and testing some new things recently (requiring .bat files) ...
I've been testing the command prompt in various different ways, but only found one way of making it work, and that was in a very impractical way (Windows 10 advanced restart -> command prompt). This led me to think that it may be a virus, or some other program, executing at startup, but so far, I have not been able to find which it could be.
In terms as precise as I can give, the problem is : When activated, the window executing the command closes instantly, before running any command, or giving me a chance to enter input.
This problem does not occur however, when the command prompt is executed without any other programs. I have tried going through background processes, but I haven't located one yet in which malignant code may be in-bedded.
This problem began to occur when I had Windows 7 btw - if that is of any use.
Client of mine called me this morning concerned about waking up his computer and seeing a command prompt open with the following in it ...
Microsoft Windows [Version 10.0.10586]
© 2015 Microsoft Corporation. All rights reserved.
C:UsersNOTREALNAME>net use m: sclientstorage
System error 87 has occurred.
The parameter is incorrect.
C:UsersNOTREALNAME>copy /Y m:dinner.exe
The system cannot find the drive specified.Obviously I have not included the actually user account name. My client is a long-time subscriber to Norton, and I would imagine his system is as tight as Norton can make it.
This happened after the fall update. It's not a big deal as I can still read it, but it's annoying.
View 4 RepliesIs there a way to disable NFC, Bluetooth and GNSS under Settings >Network & Internet > Airplane Mode with the command prompt?
View 2 RepliesI changed Command Prompt on my Taskbar so when I click on it, it opens as Administrator. That sets the default directory as C:WINDOWSsystem32 which I don't like, since any files I create that do not have a path specified will be created there.
I want it to open in my user directory.
When I look at the properties I see Start in: %homedrive%%homepath% which converts to C:Usersmyaccountname yet when I launch the Command Prompt it still goes to C:WINDOWSsystem32.
I have been running Windows 10 Pro on my HP desktop for overa week with no problems. Over theweekend Windows attempted installing an upgrade; not sure when, but during theupgrade process I received a Critical Process Died BSOD with no error code. All system restarts result in the same error, and I havebeen unable to use Repair, Recovery Mode, or Safe mode to isolate theproblem.
The only usable option seems tobe to do a System Restore where I have the choice of losing all installed apps,or losing both all installed apps and files. Is there any way to roll back to the Windows 8.1 that isstill located in the Windows.old folder from the command prompt?