SFC File Corruption And DISM 0x800f081f Error
Aug 15, 2015
I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
View 8 Replies
Similar Messages:
Aug 12, 2015
I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them.
Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:SourcesInstall.esd:1 /limitaccess both came up with the error 0x800F081F.
Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.
View 3 Replies
Nov 16, 2015
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 Replies
Aug 10, 2015
After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
View 3 Replies
Nov 9, 2015
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
View 5 Replies
Aug 29, 2015
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
View 14 Replies
Nov 9, 2015
Trying to fix this error I am getting it says the procedure called failed everytime i try to open my file explorer on windows 10 so i ran some of these cmd prompts that someone suggested an this is what it is telling me the source file cannot be found error 0x800f081f. here is the log file that cmd saved for me. I even did a computer reset that did not work the error came back again.
Attached Files : dism.log 214.54KB
View 3 Replies
Aug 8, 2015
I have this BSOD while playing youtube.
crash dump file: C:WINDOWSmemory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x109 (0xA3A01F5A6788B6B1, 0x0, 0x4CA3D042862E2DA4, 0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
KELVIN-PC-Sun_09_08_2015_113755_86.zip
View 1 Replies
Aug 3, 2015
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
View 2 Replies
Dec 24, 2015
I've been trying to use DISM /Online /Cleanup-Image /Restorehealth on my Windows 10 Home, but it keeps telling me that it does not support servicing Windows PE with the /Online option. Of course I'm not running WinPE 10.
View 9 Replies
Feb 3, 2016
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
View 9 Replies
Jul 29, 2015
So I just updated to ten, and have all the updates, but whenever I try to run a .exe file, it gives me the error "|:
File System Error (-1073741819)
View 1 Replies
Aug 15, 2015
I tried everything that can be found on the internet, i tried to download from microsoft website, no luck, tried the offline install with the win 10 installer, nothing worked.
View 9 Replies
Aug 6, 2015
When I am doing something that is moving on the screen, including moving the mouse,having a loading bar move or a blinking cursor, my screen is fine. However, once nothing on the screen is moving for about 2-3 seconds, the screen becomes corrupted and a graphical mush. Once I move something again, like my mouse, the screen goes black for a second then returns to normal, as if nothing has happened. The display will not update itself out of this issue if a key is pressed on the keyboard, unless that prompts another screen, like ctrl+alt+delete.
View 2 Replies
Apr 14, 2016
I have upgraded directly from a Windows Ten Pro ISO downloaded directly from Microsoft, but both sfc /scannow and Dism "restore heallth" run from an elevated prompt report that they cannot repair the image errors. Windows support simply says to "reset" from Update and Security from the Settings menu, but this machine was running CLEAN Windows 8.1 (sfc /scannow or DISM commands reported no errors) and resetting as they suggest will (at a minimum) mean that all of my installed software will be entirely lost.
I am desperate for a person proficient in restoring the integrity of a Windows Ten Pro image (have tried BOTH reinstalling directly from the downloaded ISO (multiple times and from re-downloaded ISO's and doing in-place upgrades). Both methods report the same errors upon reinstallation or in-place upgrade methods.
The running image is corrupt, corrupt, corrupt. What are the command(s) to restore it to health, as was the case with the previous clean 8.1 that was running before the upgrade???
Both Sfc /scannow and DISM restorehealth report that the image is repairable, but it is beyond my understanding how to do do.
View 9 Replies
Mar 7, 2016
I decided to upgrade my laptop to Windows 10 today. After a few minutes, my mom came in and started pressing the power button. Now the screen is all black. I restart it, and I could hear the start up sound and everything, but I can't see anything besides blackness. I believe my laptop is corrupt but I don't really know.
View 1 Replies
Aug 23, 2015
After installing Windows 10, I reopened some Word documents that have been an ongoing project for the past 8 years. They are long and complex documents including images, artwork and Chinese characters. I found that the formatting of these documents has been completely ruined! Everything has been moved around, some characters have been layered onto of one another and to top it off, the two fonts used for the entirety of the documents have been changed to another plainer font.
After checking the Word fonts, lots of them have disappeared, including the ones I use, and when I tried to import one of the old fonts in from a back up file, Word simply did not recognise it! Does Windows 10 automatically update to a newer version of Word when you install it? Is there any way to revert back to the way these documents were before the update? Manually reformatting them will take an estimated 1-2 years of work I tried looking at doing a system restore but there are no pre-saved restore points so haven't had any luck there, don't even know if it would work anyway..
View 4 Replies
Dec 17, 2015
I was getting a random reboot about once every 36 hours, this is the 1st time I got a BSOD before rebooting
All I was doing when the BSOD hit was listening to music using Spotify
I've replaced the power supply and reinstalled windows. I also ran Memtest86+ no issues reported
DESKTOP-K4P77GV-Thu_12_17_2015__14648_04.zip
View 9 Replies
Aug 26, 2015
My computer was working fine with Windows 10... but has developed a BSOD issue. I can't think of any changes I've made/programs installed etc, though this is likely the cause. I've run SFC /Scannow along with dism.exe /online /cleanup-image /scanhealth &dism.exe /online /cleanup-image /restorehealth
Everything says it's fine... but I'm still crashing. I've attached a copy of the file created as requested... but I'm very much at my wits end.
WINNIPEG-26_08_2015_190423_22.zip
When first running Scannow, it showed an issue with this file: MicrosoftEdgeSquare44x44.scale-125_contrast-white.png, which I have replaced with another version.
View 5 Replies
Sep 8, 2015
If I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in
View 4 Replies
Mar 3, 2016
I have an issue with my sfc and dism, as stated above. The issue started when i went to add windows features i get nothing but a blank box. Thinking there was some kind of corrupted file I ran a sfc scan only to get this, Beginning system scan. This process will take some time.
View 1 Replies
Jul 12, 2015
I just downloaded windows 10 while ago but when I ever wanna open a program i got this problem [URL] ....
View 9 Replies
Dec 1, 2015
I am using incredimail and keep getting a message "ima file is not associated with incredimail do you wish to associate it YES NO" neither make any difference .It seems to have come and gone with different builds.
View 2 Replies
Nov 15, 2015
I have a very old laptop, but despite the age it has worked relatively fine for my needs with just an HDD change. I bought this at the very end of Vista lifespan with an almost immediate Win7 upgrade offered. I then skipped Win 8 totally, but rolled a Win 10 when it came, and it has been working well. But you get the picture. This machine is old.
Onto the point: I'm getting an occasional fan rev up, with the CPU at 100%. The process is Service Host: Local System (Network Restricted). Recently, I also lost all sound on the computer, which chkdsk /f /r was able to salvage. I have a feeling these might relate to a same problem.
I researched, and found out that sfc /scannow will work. OK. It starts the verification process, but fails at 18% saying corrupt files exist. When I export the sfcdetails.txt from the log, it does not really report which files are corrupt so as to replace them. 00000e22 [SR] Beginning Verify and Repair transaction and then the logfile ends.
Because I cannot complete SFC, I'm told to run DISM, and that is how I ended up here. When I run Dism /Online /Cleanup-Image /RestoreHealth
Image version 10.0.10240.16384
At 20% an error 1726 with remote procedure call failed.
So I go to dowload the ISO and mount it. It will then give me the .esd
So I'm having my fingers crossed while running Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:SourcesInstall.esd:1 /limitaccess
View 1 Replies
Sep 11, 2015
I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.
I have the factory setup disks for only 7 and 8.
I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?
My next step is to use the log files, and attempt to find which files are corrupted.
View 9 Replies
Jan 5, 2016
Ever since downloading Windows 10, I have been unable to upload PDFs to a couple of different websites, namely dropbox and an online file converter (smallpdf.com). It either says there was an error or says its uploading but never does after a long time (hours). I have also been having similar issues uploading .PNG files to facebook messenger as well, I assume the issue is related to that of the PDFs. I've already tried resetting my web browser (Firefox), re-downloading the files, re-starting my computer and uploading files from different file locations. The issue persists when on different wifi networks.
View 1 Replies