I created a bootable Windows 10 installation USB drive on a 32GB flash drive. I was wondering it was safe to add a folder on there that would contain backups of my Favorites folder, any drivers I need for my hardware as well as other files? Or is it best just to leave it as a clean Windows install drive?
O/S-windows10 v1511 ... following the update to version 1511,I discovered .mui files and L10n files(.dlls) in my program folder. Can these files be deleted without causing problems or do they have to be transferred to the system32 folder ?
It's not even a week when I upgraded to wds 10 ..Now It won't let me roll back.When I fo to Recovery and click roll back ..START .. It keeps showing wds can not find the files to go back even if WINDOW OLD still in drive C "main" drive.The only way to roll back is to restore factory settings ..
I have Windows 10 on a 2TB HDD with about 1TB of the HDD full. I would like to migrate Windows to an 80GB SSD but I can't find anyway to do this without cloning the entire drive, which I can't do because there is too much content on the HDD. Is there any way to migrate Windows to a different drive whilst keeping all user files and installed applications on the old drive so I can have two drives in my system, the SSD for boot and the HDD for storage and applications.
I have some folders with 100s of gb I want to move them to on other folder in same drive if I copy and paste it will take hours but does moving by hold and drag safe for windows and does not cause any damage to windows or registry and how it can move big files in seconds by hold and drag while copy and paste take hours.
why if I copy and paste it will take long time to copy 100 gb while hold and drag takes only seconds.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Currently, I have dual boot Win7 and Win10. And the only reason I have Win7 is because the drivers for a printer were not updated to Win10. Now recently HP did just that, and I no longer need Win7.
The way I have it set up is that I have Win7 on one partition, Win10 on another (100GB each) and the rest is Storage. Is it safe to simply remove and format the partition that has Win7 on it ?
My DELL Latitude laptop came with Windows 8.1 Pro x64 on it. I decided that I want to upgrade it to Windows 10 Pro x64.Before I did anything I used DELL Backup and Recovery to create a flash drive so I can always restore the PC back to factory if anything goes wrong during the upgrade process.
After creating the recovery media I used the Windows 10 upgrade wizard to upgrade to Windows 10 carrying over all of my existing files. I primarily did this so my Windows 8.1 Product Key which is injected into the motherboard would officially become a Windows 10 Product Key.Now I would like to do a 100% clean install of Windows 10 through a bootable Windows 10 USB flash drive that I just got done creating but have a few questions:I booted from the flash drive and went to Custom (Advanced) install and I am currently viewing all of the partitions:
Which of these are DELL related and which of these are just the additional partitions Windows automatically installs?Can I just delete them all and fresh install Windows 10 on Unpartitioned space?Is there any that are non operating system related and might be worth keeping like the DIAGS one?Will my DELL Backup and Recovery media rely on any of these if I delete them and then try to use it later on?Is there any use for any single one these anymore now that I have backup recovery media and will be going to Windows 10?
Okay, so I reserved my free copy of Windows 10 a few days ago, and tried to install this morning. It all seemed to be going smoothly... then everything disappeared, and I was left with a black screen for three hours. Finally in frustration I powered off and on again; The blue windows 10 logo appeared, and the loading wheel span for a few seconds, followed by the black screen again - no cursor or anything. I can't enter safe mode, either - it makes a really violent buzzing sound whenever I hit F8. I'm worried my laptop is irreparably damaged... I'm upgrading from Windows 7 on a Dell Inspiron laptop (or trying to).
Still trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017
I download windows 10 pro 64bit ISO file and extracted to pen drive pc restart and loaded windows 10 setup format Disk C give the install windows after its goes 100% all done pc restarted after screen black nothing happening.
0xC1900101-0x200C The installation failed in the SAFE-OS phase with an error during APPLY-IMAGE operation
My Pc Information 1Gb Vga Card 4Gb Ram I3 Processor 500Gb Hard
Even when using disk cleanup in admin account it will say deleted but after restarting and going back into disk cleanup they are back.Even using Windows app they come back after deletion.On another note system restore doesn't seem to work , i did a system restore and even though i got the message that system restore completed successfully after i rebooted my screen was frozen and i had to do a system refresh to get it up and running again.I have been waiting for it to delete my temp files for 8 minutes already.
I ended up using an extra 2 GB or so of hard drive space after the windows 10 install. I ran desk cleanup and removed the old windows files which was a lot. But wasn't Windows 10 supposed to free up space?
Prior to install the computer showed 241GB of 297GB used. Now it says 256GB of 297 used. And this is after windows 10 disk cleanup removed the old OS files which was something like 20GB.
Under storage use it shows
System and Reserved - 49.7 GB inside of which 42.1 GB is system files. Isn't this a lot? The rest of the 7GB under system and reserved is 3GB Virtual Memory, 3GB System Restore and 1.5GB Hibernation file
Apps and Games - 6.83 GB (I have no games and besides the stock apps, I might have just 5 apps installed chrome,vlc player, ytd, ccleaner and iTunes
Temp files - 3.98 GB and I always kept this clean with ccleaner prior to win 10 install but been scared to run it after the update because I'm waiting on more ccleaner updates to save from issues (heard some horror stories using ccleaner on win 10)
One Drive - 51 GB used - I saved movies now this is saved in the cloud not on my hard drive right?
Background. This computer I just got a week ago. I was restored back to factory 8.0 and I than updated to 8.1 and than updated to Windows 10.
I have decided to migrate to Win10 while maintaining my Win7 system until I'm sure (on the same box). Win 10 is installed on a new SSD, Win7 on an old SSD, with all my files held on a 1TB drive so I planned to just save any files I needed, like brower shortcuts on the storage drive.
In Win 10 I have had no issues viewing the files on this drive until today. I have a simple text file for storing information about the migration, and I can open it, but only see an old version of the file. It is fine in Win7. New files and folders I create in Win7 are not visible in Win10 at all now. What am I missing given all the old files created in Win7 are working fine?
E.G. If I boot into Windows 7 and create a folder on the root of the storage drive, called test, then boot into Windows 10 from my other SSD not only can't I see the test folder, I can create a folder named test. I've not booted into Win7 yet to see if I can see that from there.
Recently I had my Windows Vista upgraded to Windows 10 (also upgraded various hardware).
Today I was fiddling around and customizing it, when I noticed that all of my files that were previously saved on my C: Drive were now on my D: drive, like my Program Files and, well, basically everything I ever downloaded.
Should I be worried? I've heard that things like Program files are MEANT to be on the C: Drive, whereas the D: drive is meant for windows files...
I can't delete any folders from my system drive C: Keep getting error code "1 interrupted action" Invalid MS-DOS function. I have gone in and checked all my security settings and I have full permissions for everything. I get this error code no matter which folder I try to delete. It's as all files are locked. Can't even drag and drop to the desktop to try removing them that way.
Have a little problem viewing files on my NAS drives.I'll got a couple of NAS drives on my home network that I use for backup, storage and coping files between my computers.Ended up with a windows 10 laptop the other day and I wanted to transfer a file from my desktop to my laptop, so I just dropped the file onto my NAS drive and then turned my laptop and went to the NAS drive to get the file only to find I couldn't see any files on the NAS, only three folders "Pictures" " Music" and "Videos"
Been playing around trying to work it out for the last week but no luck, I tried to copy a file from the laptop to it but I can't do that either.Sure it must be some setting but I can't seem to find it, tried searching but I'm missing the keyword, only finding people with problems seeing there NAS drive.I should add that I can see pictures and music files if I open the "Pictures" or "Music" directory but I can't see another other soft of files (.txt .iso .exe ect).
Why I do this is unimportant. In Win 7, when I move my daily backup files (2 weeks worth about 20gb) from my current BU folder to my save BU folder, the move took a couple of seconds (I think because only the file pointers were changed.) Under Win 10, it takes in excess of 2 hours (I think there is a physical move of file data.) This is my third try since installing Win 10 on my (admittedly slow) server. Will renaming the files work?
I just installed Win 10 and had backed up everything to a USB hard drive before doing so. Well it seems for some reason Win 10 removed my folder with all my work in it and also changed the folder and file permissions on that drive during installation. I talked to customer support and after spending an hour with tech support and not finding them, the person said it was impossible for Win 10 to do that and I was basically called a liar. So I'm having problem of win 10 altering or removing files on a drive it shouldn't even have been touching?
i'm having an issue with my laptop, i think it's something called a memory leak because my RAM won't go below 80% even when my laptop is idle. I've been searching the internet for answers on how to fix this problem but didn't find any luck. I've already wasted an entire day trying to figure out how to fix this, I even tried to do a system restore but i forgot to save any restore points. I'm hoping Resetting/Refreshing would be the answer but i'm facing another problem; My media installation tool or USB Bootable Drive (I don't know if they're the same. It's what i used when i installed Windows 10) is that of a previous Windows 10 version & build. Would it work If i use it to Reset my laptop? I'm currently using the latest version, build 10586.36.