Satellite A505 S6005 Not Coming Out Of Sleep / Hibernation After Upgrade
Oct 7, 2015
Ever since I upgraded from Win 7 to Win 10 my laptop (Satellite A505 S6005) will go into sleep mode without issue but refuses to wake up up. I have to do a hard power down in order for it to turn off. I've checked my power settings and everything is the same as it was for Win 7.
I found online that it seems to be a possible issue with the Intel Management Engine Interface not being the right version. I'm currently on driver version 6.0.0.1179. I've tried to upgrade it to a new version but Windows states I have the best version for my PC. Have also tried via Toshiba and Intel sites for a new version with no success. How to get a new driver version?
View 2 Replies
Similar Messages:
Aug 13, 2015
When I open Google Maps, I get the street view photos at the bottom of the screen, but the map itself is a black screen in both street map and satellite settings.
Latest Win10 64 drivers are installed; Nvidia GeForce GTX 750Ti
View 7 Replies
Sep 13, 2015
I set the Power options in the Control panel for the display to turn off for e.g. 10 minutes. When not using the computer, the screen is put to sleep after that amount of time. If I then try to get it out of this modus by moving the mouse or tapping any key on the keyboard I get a screen but NO icons on the taskbar and an empty background (no actief apps). I can see mouse movements but I can' t d launch any apps. when I set the turn off display setting to "never", obviously the computer never went to sleep and everything stays as it should be.
My configuration is as follows:
Win10 Home Edition
Intel 64-bit
View 5 Replies
Oct 7, 2015
Recently upgraded a friends computer to windows 10 and we're running into an annoying issue while playing a low resolution (800x600?) game. The game boots up fine and everything is great until we pause and come out of sleep mode when the whole image on the screen is compressed to half the screen with inverted colors (this same thing happens when the windows key is hit to go back to the desktop and try to go back to the game). The image isnt frozen, you can hear the sounds and see things lighting up. The actions are working on the whole screen but the image is compressed to the left half of the screen. So it seems to me that there's some software issue involving the graphics card since the computer is having issues switching between resolutions?
View 2 Replies
Dec 24, 2015
I have all the power settings set to stay active, but the computer goes into sleep or hibernation (I do not know which) after being idle for around 20 minutes.
View 3 Replies
Oct 16, 2015
Recently I have noticed that my computer is EXTREMELY SLUGGISH after I wake it up out of sleep mode. It runs very very slowly. Rebooting is the only thing that fixes the sluggishness but then it happens again once my computer is put to sleep and then wakes up.
My computer is an Alienware Area 51 R2. I upgraded to windows 10 about a month ago without any problems. I have the Hibernate feature turned off as the files required to preserve my computer state during hibernation take up far too much space on my tiny 120 GB SSD that windows is installed on (all my games and other stuff are installed to the 1.5 TB standard platter-based hard drive) Sleep function remains enabled though.
I have a pair of NVIDIA Geforce GTX 980 graphics cards and am using the latest graphics drivers with them (358.50 according to the latest update i got).
Defragmenting (and in the case of SSD, trimming it) have not worked.
View 7 Replies
Mar 6, 2016
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
View 1 Replies
Jan 24, 2016
On my Desktop, whenever I go to Start > Power > Sleep , when I come back from Sleep the Start window is still open. In Windows 7 we came back to a clean desktop. It does this on 3 PCs.
View 5 Replies
Nov 8, 2015
On my laptop, I get this error from time to time when resuming from Sleep/Hibernation: BSOD with 0x45000126 ...
I have tried to google it, but without ANY hits! What this error is?
View 3 Replies
Aug 17, 2015
I had this problem when Windows 8 was new (but never had it with 8.1) and now it looks like it is back with W10.
My PC was fine up until about 2 days ago, it would go into hybrid sleep and wake with no problems but now every time I try to wake my PC the LED's, mouse and keyboard turn on but then it crashes and reboots.
I tried re-installing drivers, un-installed them, downloading them from the manufacturers websites instead of windows update but the problem remains.
I think I've narrowed down where the problem comes from and it appears to be the hybrid sleep option, disabling it and just using sleep works as expected, but if I try to use hybrid sleep....boom it happens again. I also tried enabling hibernation and that also crashes when waking up, so I assume there is a problem with the hibernation feature.
View 1 Replies
Jan 26, 2016
Had this problem now since installing Windows 10 for the first time. Have re-installed 10+ times, from new downloaded ISO's with hash tag checks just to make sure. Have bought all new hardware as well; CPU, PSU, Mainboard, Computer case, CPU Fan (3 of them), problem still persists, is obviously a Windows 10 problem.
CPU Fan slows to almost halt after waking up from sleep/hibernation.
View 9 Replies
Dec 21, 2015
I have a Toshiba Satellite m645 with Windows 10. I'm seriously trying everything just to access the UEFI/BIOS settings on this computer. I know that you have to go to Update & Security and reboot through the advanced settings. Then you click troubleshoot and in that menu should hold a uefi settings option but my computer just doesn't and I'm not able to press esc/f2 on startup to access bios either because that simply doesn't work. Why don't I have a uefi settings option?
View 4 Replies
Feb 26, 2016
I have a Toshiba Satellite P55-A5200 laptop with a CD/DVD player. I insert the CD/DVD, I can hear it starting up and making noise, but then nothing happens. What do I need to do to play these disks?
View 1 Replies
Oct 31, 2015
my Toshiba Satellite has Windows 10 and it shows that it's connected to the internet though when i try and run chrome it say's it's not connected when i run steam it say's it cannot connect to the steam network.
View 1 Replies
Oct 5, 2015
I have a Toshiba Satellite S55-A5294 laptop computer. It is running Windows 10. I had the drive encrypted using Jetico's BestCrypt full disk encryption.
Several weeks ago, I was using Windows, put the computer to sleep, and when I came back an hour later and woke it up, I got the "Preparing Automatic Repair" screen. This was followed by a message that automatic repair was unsuccessful. This problem has happened in the past. In the past, it was the result of a Windows update overwriting the BestCrypt bootloader (BestCrypt encrypts the system partition, so it has to have its own pre-environment password prompt, which can then pass to the mounted system). However, this time it wasn't the case.
As it turned out, I had a corrupted volume. I was able to recover my data. I pulled the hard drive out of the Toshiba computer, put it in a USB enclosure, and connected it to a Lenovo Thinkpad E530, also running Windows 10. In this configuration, I was able to decrypt the drive, and access my data.
I restarted my Lenovo and forgot to disconnect the Toshiba's hard drive. The Lenovo booted right up, into the Toshiba's desktop. I backed up my data, and, for good measure, made a disk image of the whole thing.
I pulled the drive out of the enclosure, and reconnected it to the Toshiba, from which it originally came. When I turn it on, however, I get a BSOD informing me that I have an error:
INACCESSIBLE_BOOT_DEVICE, and the computer then automatically restarts. Upon restart, I receive either the same thing, or a "Preparing Automatic Repair" screen, which then tells me that my computer failed to boot, and suggests a restart. There is also the option for advanced troubleshooting. If I restart, I get locked into the same loop.
I am still able, however, to pull the drive out of that computer, and boot it up when it's attached to my other computer.
I tried connecting the drive to the Toshiba (the original computer from which it came) via the USB enclosure, and I still get the same errors. The Toshiba is able, however, to boot a Linux Live USB.
I know that the drive is bootable. And I know that the Toshiba is willing to boot. They just won't play together.
I ran chkdsk on the system volume, and found no errors. I tried using the Repair option on a Windows 10 installation USB, and didn't really get anywhere.
why the same disk would be bootable on one computer, and not bootable on the other.
View 2 Replies
Aug 2, 2015
After upgrading to Windows 10, my PC will not go to sleep automatically nor will the displays turn off after the specified time (10 minutes). If I put it to sleep manually from the Start menu, it will go to sleep and usually stays that way until manually woken up. I had no issues with my PC going to sleep in Windows 7.
So far I've tried:
Unchecking "Allow this device to wake the computer" on my NIC
Disabling password required when the PC wakes up (saw it on another thread so figured I'd try it)Updating all drivers (chipset, graphics, etc)Updating my motherboard's BIOS
Disconnecting my keyboard and mouse
Checking powercfg /requests (its blank - everything is none)
View 3 Replies
Jul 31, 2015
I just upgraded to Windows 10 and I don't have the option to put my computer to sleep.
My only options are: Do Nothing, Hibernate, Shut Down and Turn Off The Display.
Where has the sleep option gone?
View 1 Replies
Aug 10, 2015
It was working fine with Windows 7. I upgraded to 10, and it won't wake up. I have to hold down the power button till the computer shuts off and start it up again.
I went to Dell support, updated all drivers, no luck.
It's a Dell XPS 870.
View 3 Replies
Aug 4, 2015
I upgraded from 7 to 10. The upgrade was smooth and I didn't see any issues immediately. But, after setting the power and screen saver settings, the monitor never went into standby and screen savers won't start. I did not try hibernation because I never used it before. I discovered that didn't work either. So, I regressed back to 7 and everything works as before. So, as a test, I installed a spare HDD and did a clean install from USB. Same issues as the upgrade. Maybe I'm nit-picky, but I want the monitor to go to power saver after 5 minutes.
View 31 Replies
Aug 21, 2015
After updating to Windows 10 Pro recently I get a lot of BSOD's (DPC_WATCHDOG_VIOLATION). Mostly when my laptop wakes up from a well deserved moment of sleep. Also I noticed that sometimes the laptop awakens from sleep when I didn't ask it to wake up.
Culprit (driver probably). Here's the dump file I collected XPS-vr_21-08-2015_120314,69.zip
View 3 Replies
Aug 3, 2015
This was working fine on Win 8.1, but since my upgrade my PC now won't wake up from any keyboard, mouse or PC power button press once in S3 sleep or hibernation.
The only way to wake the PC is to reach back to the PSU and turn the power off, wait 5 seconds, then turn the power back on. I can then press the power button on the front of the PC and Windows then resumes from sleep.
powercfg /A returns this:
The following sleep states are available on this system:
Standby (S3)
Hibernate
Hybrid Sleep
Fast Startup
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
Standby (S2)
The system firmware does not support this standby state.
Standby (S0 Low Power Idle)
The system firmware does not support this standby state.
I have the latest firmware on my relatively new Gigabyte 970A-D3P.
View 5 Replies
Aug 6, 2015
I have an Asus Vivobook. In windows 8 I used sleep mode all the time. after the upgrade to windows 10 whenever the computer enters sleep mode either by closing the lid, automated or manual, when I wake it it restarts. I entered the BIOS and the AHPC mode was enabled, and was the only option. I looked through the computer power options, but I can't find anything.
View 1 Replies
Jul 31, 2015
I just upgraded windows 8.1 to windows 10, everything works fine, except monitor does not go to standby by after 15 minutes of idle. I checked power settings, change it, back, forward, nothing, same thing.
View 4 Replies
Sep 18, 2015
Freezing, black screen, no cursor, monitor goes to sleep, computer still running after upgrading to Windows 10 from Windows 7. Must manually force computer shutdown. HP desktop.
View 1 Replies
Dec 11, 2015
All downloads going to phone not laptop. Just loaded chrome and signed up for google cloud....
View 2 Replies
Aug 29, 2015
I recently built a new PC, and it contains my old hard drive and a new 2TB hard drive. My old PC had Windows 7 on it. New mobo meant I needed to install Windows 8.I started to have issues right off the bat. Sometimes, it would boot to a black screen, and then would boot fine if I restarted. Windows 10 came out a few weeks later, and I upgraded to that. Now, it will try to boot Windows 8, then Windows 10 right after. It will still regularly boot to a black screen first. Additionally, coming out of hibernation often results in the blue screen CRITICAL_PROCESS_DIED error.
So far, I have not been able to find anything useful to fix the problem. I did some things in the command prompt, based on other threads' advice, such as running sfc.exe/scannow and dism.exe /online /cleanup-image /restorehealth. I got Error 87 after running the second one.
View 1 Replies
