Satellite S55-A5294 / Hard Drive Won't Boot On One Specific Computer
Oct 5, 2015
I have a Toshiba Satellite S55-A5294 laptop computer. It is running Windows 10. I had the drive encrypted using Jetico's BestCrypt full disk encryption.
Several weeks ago, I was using Windows, put the computer to sleep, and when I came back an hour later and woke it up, I got the "Preparing Automatic Repair" screen. This was followed by a message that automatic repair was unsuccessful. This problem has happened in the past. In the past, it was the result of a Windows update overwriting the BestCrypt bootloader (BestCrypt encrypts the system partition, so it has to have its own pre-environment password prompt, which can then pass to the mounted system). However, this time it wasn't the case.
As it turned out, I had a corrupted volume. I was able to recover my data. I pulled the hard drive out of the Toshiba computer, put it in a USB enclosure, and connected it to a Lenovo Thinkpad E530, also running Windows 10. In this configuration, I was able to decrypt the drive, and access my data.
I restarted my Lenovo and forgot to disconnect the Toshiba's hard drive. The Lenovo booted right up, into the Toshiba's desktop. I backed up my data, and, for good measure, made a disk image of the whole thing.
I pulled the drive out of the enclosure, and reconnected it to the Toshiba, from which it originally came. When I turn it on, however, I get a BSOD informing me that I have an error:
INACCESSIBLE_BOOT_DEVICE, and the computer then automatically restarts. Upon restart, I receive either the same thing, or a "Preparing Automatic Repair" screen, which then tells me that my computer failed to boot, and suggests a restart. There is also the option for advanced troubleshooting. If I restart, I get locked into the same loop.
I am still able, however, to pull the drive out of that computer, and boot it up when it's attached to my other computer.
I tried connecting the drive to the Toshiba (the original computer from which it came) via the USB enclosure, and I still get the same errors. The Toshiba is able, however, to boot a Linux Live USB.
I know that the drive is bootable. And I know that the Toshiba is willing to boot. They just won't play together.
I ran chkdsk on the system volume, and found no errors. I tried using the Repair option on a Windows 10 installation USB, and didn't really get anywhere.
why the same disk would be bootable on one computer, and not bootable on the other.
View 2 Replies
Similar Messages:
Oct 24, 2015
I have an SSD with a Windows 10 installation on it. This Windows 10 is and upgrade from Windows 8.1 which was an upgrade from Windows 8. I still have the Windows 8 key and installation media. What I'm doing is building a new computer, but my hard drive is still new, so I want to keep it. When I put it in the new system I plan on doing a refresh or clean install, so that everything is nice and clean.
But, I don't have a product key for Windows 10. Is my only option to use my Windows 8 CD then upgrade to 10? Is there a way to retain my 10 installation then reset it? This one hurts my brain. What I think would be best is right before I move the hard drive is do the reset, then move it to the new computer, but then I don't know how windows will active since I can't use the 8 key and it can't do a internet activation based on hardware because all the hardware is new.
View 1 Replies
Dec 13, 2015
I cloned my hard drive a Seagate 2T to a WD 2T using acronics software.I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back in booted???
View 4 Replies
Jul 22, 2015
Two nights ago, I had a brief power outage at my house. Since then, my Windows 10 preview installation will not boot. It keeps giving a boot disk error. I first tried booting from my Build 10166 disc created from ISO and running the startup repair. I've seen errors using this tool on previous Windows versions, but the computer quickly rebooted, so I thought it was successful without errors. Nope, I still get the boot disk error message.
I booted again with my installation disc and tried running the "Refresh" option. This time, I get a message that the drive containing my Windows installation is locked and that I should unlock it before trying again. How I can unlock the drive? Unless I figure that out, it sounds like I will have to perform a clean installation.of Windows 10, which I don't really want to have to do again.
View 3 Replies
Dec 7, 2015
I just got a new computer with Windows 10 (Jury's still out) and am trying to access my Buffalo external hard drive from it (i believe it is a NAS. It lists on my desktop as LS-CHLD2F). I disabled windows media player cause I don't want to access it through that (screws everything up). I also installed the Buffalo disc on the new computer but that didn't seem to solve anything. I would like it to show up in my network but just don't know how to get it there and obviously don't want to reformat my hard drive. I just want it to be seen. All of my work is on there and need to access it as is.
Update: I am now able to access it from the desktop but still isn't showing up when I go to File Explorer then Network. It is a Linkstation.
View 1 Replies
Jul 9, 2015
I have Lenovo z580 ideapad, i recently purchased a new sshd and wanted to install windows 10, downloads the file of windows insider preview and copied it to a 32 gb sandisk usb. unfortunately even after setting the bios to usb boot its not booting.
View 1 Replies
Feb 20, 2016
So i have 2 hard drives, one new and one beginning to die on me. I have windows on the dying hard drive, and do not have the original disks or product key. I tried using DriveImage XML to copy everything onto the new drive, but for some reason when it boots it says "Hard disk failure" when i have the just the new hard drive in there (i am 100% sure it is plugged in properly). I really dont have the money to buy a new windows disk, and so i was wondering if it would work if i were to factory reset my computer and have windows 10 reinstall on my new hard drive, or is there an easier way?
View 1 Replies
Mar 25, 2016
I need to open my external hard drive. It reads in the computer but it won't open.
View 1 Replies
Feb 23, 2016
I upgraded my windows 7 computer to windows 10. I have an external hard drive that I am unable to open. When I connect it to the computer now, a reformatting window pops up asking to do this. Obviously, I don't want to delete the data on there as I used this drive as my backup. How can I go about opening this drive?
I checked on someone's else computer running windows 7 and my data is there, but my friend upgraded his computer to windows 10 and now I can't transfer data that way.
The hard drive is a WD Scorpio, model WD25000BEVS. Don't know if that is useful. I am wondering if part of the issue is that I have this harddrive is from a previous laptop that ran windows vista. That computer failed bcs it was a subpar HP product. I literally baked the motherboard several times for it to work. I finally gave up and got a new computer but kept the drive. I should have reformated it but I only deleted everything but the user folder.
I am wondering if part of the issue is ownership of the drive. I know that when I first used this drive I had it take ownership of the hard drive. I know this can be done in window 10, but I can't seem to ever open properties of the harddrive while its plugged in.
View 3 Replies
Jan 5, 2016
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 Replies
Oct 24, 2015
My custom-built pc all of a sudden won't boot in to windows. i get the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key", and i have made sure that my hdd is my first boot option. i want to reinstall windows now because that seems like the only way out, but i cant because i have no recovery usb or disc. what can i do to boot to this harddrive, that my bios detects just fine.
View 1 Replies
Oct 6, 2015
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS setting. And my BIOS can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
View 4 Replies
Oct 20, 2015
So, i am going back to Windows 7 so i have my disc and key. But how to start my computer from the CD drive with windows 10. With Windows 7, there was a key(like F2 or F12) to change boot device. that is not there with Windows 10. So how do i boot my computer from the CD Drive?
View 13 Replies
Oct 16, 2015
There are 2 specific websites that we were able to access just fine (about a week ago) on our home computer, phone, and tablet (at home) and on any browser.
Now, we cannot access these sites (gives 'server taking too long to respond' and ERR Connection Timed Out' through ANY browswer at our home and we CAN access them ONLY thru Firefox at our Shop/Business computer. (which uses the same ISP as our home, btw).
We have spent hours on the phone with our ISP and he did everything you could think of: Checked our Router, gave us a completely new IP, checked DNS, flushed DNS. Our sites would work when he checked them through I guess different proxy servers. And I CAN access them ONLY thru something like: Ninjaproxy.com.
These websites are through GoDaddy. We contacted them and they said they could access them fine, too.
I have increased timeout thru registry.
FireWall being on or off makes no difference
Ran various Antivirus, found no threats.
Checked both websites in question at Downforme.org and downforeveryoneorjustme.com. Both state it is 'Just You' that both sites are up and running/online.
I am thinking maybe a System Reset/Restore may work, but haven't tried that, yet.
WTF could this all mean? WHY are ONLY OUR COMPUTERS being blocked, yet various other friends (even with same ISP as us) can access them just fine?
Redirect Virus?
DNS issues?
Blocked/Hacked?
Go Daddy or our ISP at fault?
View 12 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Jul 30, 2015
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
View 3 Replies
Aug 27, 2015
I have had windows 10 since the beta and I recently bought a kingston 120gb ssd I want to do this by reinstalling but since I got windows 10 during the beta with no install disk I have no ability to simply reinstall but how to transfer my license.
View 1 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Feb 2, 2016
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
View 3 Replies
Dec 21, 2015
I have a Toshiba Satellite m645 with Windows 10. I'm seriously trying everything just to access the UEFI/BIOS settings on this computer. I know that you have to go to Update & Security and reboot through the advanced settings. Then you click troubleshoot and in that menu should hold a uefi settings option but my computer just doesn't and I'm not able to press esc/f2 on startup to access bios either because that simply doesn't work. Why don't I have a uefi settings option?
View 4 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Oct 24, 2015
I have two hard drive on my PC, as SSD for the OS and a HDD for all my storage.I seem to have a problem with search, that it will only find stuff that is stored on the SDD.To get it to look for other files on the HD, I have to click search my stuff, and even then it still doesn't work.Is there a way to fix this? As most of my stuff is on HD and click search my stuff is a bit annoying.Also when I click rebuild index, nothing happens. I get a dialogue box saying it will take a long time, but then it doest say its indexing
View 3 Replies
Feb 10, 2016
My old computer was a windows 8 that was upgraded to windows 10. I just ordered a new i5 6600 which comes with windows 10, a 250G SSD and 1 TB hard drive.. My old hard drive appears to be a Seagate Barracuda 1TB SATA which seems to be the same as the one in my new Vanquish. My old hard drive is 2/3 full and is backed up often. My question is can I move this old hard drive to my new computer as a separate drive without formatting it and use the data on it (or transfer my data) or does it need to be formatted (thus giving me roughly 2 TB of space with the 1 TB provided with the computer). It was my C: drive in the old computer.
View 8 Replies
Jan 18, 2016
Is it possible to do a defragmentation on my PC's hard drive?
View 2 Replies
