Screen Flickers On Dell XPS Laptop After OS / Driver Updates
Sep 20, 2015Installed Windows 10 plus all driver updates on Dell XPS laptop. Screen flickers and dances sometimes.
View 1 RepliesInstalled Windows 10 plus all driver updates on Dell XPS laptop. Screen flickers and dances sometimes.
View 1 RepliesI was working on this laptop when quite often, after startup or in the middle of something (random), the screen goes blank and flickers, with random lines, etc. but you can't see anything.
When I am able to actually see because the problem hasn't started yet, everything works fine, no slowdowns, etc.
Moving the lid does nothing to alleviate the problem.
What is the potential causes? GPU? Battery? HDD? I did a BIOS test that said the HDD needed to be replaced. Laptop is older, back in the times of Vista. But I don't think it is the OS because this happens right at boot sometimes, other times at the logon screen, and others while inside.
I recently updated my DELL L502X to Windows 10 from Windows 7. All drivers have been installed and Device Manager shows no problem. However I'm seeing a weird issue. I'm using an external monitor (ASUS) through HDMI. I'm setting the display to show on external monitor only. In Windows 7, everything works fine. After the Windows boot logo disappears, laptop screen turns off and external monitor turns on. In Windows 10, however, there is an issue.
After boot logo disappears, external monitor turns on, and laptop screen turns off - but not completely. There is no content anymore but the back light is still on. If I switch the display mode to Duplicate or Extend (just to turn on the laptop screen) and switch back to Second Monitor Only, the laptop screen can turn off completely.
Both monitors are shown as Generic PnP Monitors in Device Manager. I don't know if this is a driver problem or something related to my laptop. The bottom line is in Windows 7 there is no such a problem.
On a Dell Vostro 3550 laptop, there were a few issues with Windows 7, so I erased the drive, did a fresh install of Windows 7 Pro, downloaded and installed all of the drivers from Dell. Then did a Windows 10 upgrade. When Windows 10 would first boot, it kept giving a 0x error. I did all of the Windows 10 updates and that error went away. But it would boot to a black screen.
I plugged an external monitor into the laptop and updated the BIOS to A12 and I have video on the laptop again. The main problem I have now is every minute or so, the screen will flicker and explorer restarts. As soon as it flickers, the task bar is gone for a second and then reappears. I have uninstalled the video and sound drivers but this didn't change anything. Is there something else to try to get Windows 10 to work correctly on this laptop?
when i am playing super mario star road on project 64 1.6 full screen my screen flickers black
View 1 RepliesI am using a HP envy i7 laptop i usually don't switch it off regularly instead i keep it into sleep mode, last night it failed to come back to life from sleeping,it brings blue screen error message that DRIVER POWER STATE FAILURE even after several restarts. How can i fix this without damaging my files coz my laptop is useless for now.
View 1 RepliesI have an Asus Zenbook UX303LA, and I upgraded to 10 yesterday. When I put the comp to sleep and wake it up by opening the lid, the screen begins blacking out and refreshing. Everything else seems fine--I can open apps, navigate the desktop and so on, in between the black outs. The problem has so far been solved by restarting each time. I can't find any information on this issue, so I don't know what might be causing it (driver incompatibility with 10 seems a likely culprit--this was not at all an issue with 8.1, which is what I was running prior to the upgrade).
View 2 RepliesI've a sony laptop cum tablet (ultra book) with intel core i7 processor. I updated to Windows 10 today (previous version Pro windows 8). The install was successful but after the install my start up screen started flickering. I shut down and restarted the laptop and now the opening screen is frozen at the log in page which says- 'fast access, face recognition'. The camera is also not working to recognize the face. I'm also not able to log in manually. (I used to have face recognition mode with pro windows 8)
The laptop is not shutting down any more and don't accept alt+cont+delete command.
while working on my laptop, it suddenly goes off, and I cant get it to switch back on, so I take the battery out and after few seconds I try to switch it back on, no go, then
after a minute or so, the computer suddenly springs back to life, saying its doing a windows update,i had no notification of a windows update, so I cant understand whats going on here, and best of all , this is the second time this has happened
I have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
My laptop is Dell inspiron 5520
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
View 6 RepliesHow can I boot my Dell Studio 1749 Laptop from either a USB or External HP CD/DVD drive in order to bypass a disabled internal CD/DVD (with stuck disk)? And how do I create the USB Boot Drive?
The F12 boot options freeze up trying to boot my repair disk in external dvd.
I went to Dell and saw that my laptop is compatible with Windows 10. It's a Dell Inspiron 3737. I thought I fixed my issue when I disabled "fast startup" in power settings. It occurs to me that some of my problems were fixed (excessive battery draining).
If I shut the lid and leave it, the next day the laptop won't turn on. I have to hold the power button down until I see the power LED flash and then I can press the button again to turn on the laptop.
So on RTM build, you used to have these options:
But now, in TH2, you only have this:
Is it going to be like this every single update? If so, I'm done with Windows 10.
I have a Dell laptop with Windows 10 on it. When it goes into sleep mode, if I swipe the touch pad within a few seconds it will come out of sleep mode. However if I'm not at the computer so that it is in sleep mode for a while, then when I swipe the touch to pad wake it up sometimes it will wake up but sometimes it won't. If it won't wake up then I have to use the power switch to shut it off and reboot it.
View 5 RepliesI'm thinking about getting a new Dell XPS laptop. It comes installed with Windows 10. I would rather use Windows 7. My question can I format the the new Dell laptop and install a new copy of Windows 7. Or are there too many driver specific components on a new XPS that need Windows 10 to function properly.
View 4 RepliesURL... and now its been stuck on a screen that says "Installing Windows" at the top with a percentage and circle in the middle and a note at the bottom that it's installing features and drivers. However, it has been doing this for two full days now. It comes back up at 64%, goes to 100%, restarts, then goes through the same thing. I have a Dell laptop and no error messages come up at any time.
View 1 RepliesI upgraded from 8.1 on Dell XPS 8700 and the download and installation completed flawlessly. I did a winver and it shows Windows 10 Build 10240.
However, it will not validate, showing the error : "The filename, directory name, or volume label syntax is incorrect. (Error code: 0x8007007B)"
I also ran software that returned the following information.
"Windows Product Key Information
Product Name: Windows 10 Home
Product ID: 00326-30000-00001-AA668
Installed Key: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99
OEM Key: *****-*****-*****-*****-HFQ2D
OEM Edition: Win 8.1 RTM Core OEM:DM
What am I missing? Or is it really a Windows Activation Server Issue? OS is great, everything works fine with it.
When I select "Camera" I get a white box, with one word printed in the upper left hand corner,"Camera". This appears for two seconds and then I am back to my desktop picture.
View 5 RepliesYesterday I updated my OS from Windows 7 to Windows 10. All seems to be working swimmingly apart from the sound, which doesn't work at all. I checked the drivers and it says that they've been updated yesterday along with the OS change. Oh, I use Dell Vostro V131 laptop.
View 3 RepliesI have Dell 15-3521 and it was working perfectly with no issues like this, now as the new update of Windows 10 is automatically installed, now after upgrading to Windows 10 whenever i shutdown my laptop it automatically turns itself ON. It is happening after upgrading to Windows 10. Whenever i shut it down it turn it self on after some time. Their is no task in Task Management which could turn it ON.
View 15 RepliesI have a Dell M3800 and a work colleague has a Lenovo something, both pretty new. We have both upgraded to Win 10 and have no internet access. We can see our wifi devices in device manager, but no wifi shows up. Direct wired connections also don't work.
I have win 10 on 2 pcs and an old laptop, all with no issues.
Dell Inspiron 5000 series, brand new
Originally the DVD drive would not show at all in File Explorer, despite Device Manager recognising, drivers up to date, etc. Dell diagnostics reported various feedback ranging from perfectly ok (SupportAssist, on-line smart diagnostic quick test) to failing some tests (on-line optical drive tests) and requiring attention (sadly, the attention it suggested I use was a 'fix' tool on the Microsoft website that would not run on Windows 10 operating platform so I have not been able to persue further)
Things improved a little after downloading and installing all of the urgent and recommended Dell updates, plus installing all of the Windows updates. Now the laptop shows the drive in File Explorer, and occasionally media is recognised and even played. For example, inserting an audio CD into the drive immediately after booting up will run autoplay and the tracks are displayed as expected in File Explorer.
However, subsequent CDs (or any other media) are not recognised. The drive 'acts' like it should (led goes on, whirring sound made, etc) but nothing happens. File Explorer displays whatever the previous media contents were.
So for example, if I insert an audio CD with 10 tracks immediately after booting, the CD will autoplay and the 10 tracks will display in File Explorer. Everything seems fine. If I then eject this CD, and put in an audio CD with 5 tracks, File Explorer will continue to display the 10 tracks from the first CD. The new CD wont autoplay. Its basically not recognised.
This is quite frustrating because it means I have to reboot every time I want to change media.
I determined the high resource usage when idle (laptop) was caused by the Synaptic Touchpad drivers. Upon uninstall, Win10 will immediately start downloading and installing the driver. I disabled automatic driver updates.
However, I would like to keep automatic driver updates for everything except the Synaptic Touchpad drivers.
I have dell Inspiron 3537 Laptop recently update in windows 10 before it was using windows 8.1 that time my laptop gesture touch pad was working when I scroll in our touch pad with 2 finger it was working but now is not working. My touch pad driver already installed and update.
View 1 Replieson my dell laptop I installed windows 10 perfectly fine. I then did a restart of the laptop but every time I turn the laptop on the dell logo shows up and then...... Nothing. Just a black screen. how to fix?
View 2 Replies