Upon start up of my PC it loads up then the screen goes blank, like its in sleep mode, no mouse nothing, if I turn the monitor on and off, the screen appears for a second or two then disappears again.
I tried restarting in safe to check drivers but it does exactly the same thing here. In safe mode however, under monitors Generic PNP Monitor has the Yellow Exclamation mark indicating an issue. I have tried uninstalling this and also my graphics drivers and it seemed to work for the first time. Next day I turned on my PC again and the same thing is happening. I have to constantly turn on and off my monitor so I can navigate to the relevant areas to uninstall drivers etc.
I have tried a Google search but everything I have read has said something about having a mouse pointer on a blank screen but I do not even have that.
My graphics are built in, not a separate card which the driver for this is labelled Intel HD(R) Graphics. Unfortunately I do not have access to another monitor to check to see if the monitor is faulty. Just to add, this just started randomly before a fresh Windows 10 install.
My computer went to a black screen again after installation, but after waiting for a while my computer fell asleep and I went to wake it up and the black screen was gone. I still get the black screen after I restart, but I just press the power button on my laptop, put it to sleep and then I press some button (any) and it's fine.
A black box appears and quickly disappears while I am online, after installing windows 10. It appears on the left side of my screen. It causes sites that I am on to close, and will also make the things I am typing disappear.
I recently upgraded to Windows 10 from Windows 7. Since the upgrade I have noticed the following:
When my computer comes alive from screen saver mode, sometimes though not always all the icons are missing. The task bar is there but clicking on any item there does nothing. It's like everything just seizes up.
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
After successfully installing Win 10 it ran without any issues for about 1 day then Edge refused to launch, the splash screen opens for about 10 seconds and then disappears. The only change made to Edge was to import bookmarks from IE. Unsure where to start looking for an answer.
The Windows store won't open and I'm not sure what to do when i click on it, the splash screen pops up for half a second then disappears as if I never opened it, however it used to work. I've tried running commands in the powershell, scanned my computer, cleared the cache, and when I used the store troubleshooter it said that I needed a microsoft account, although I had signed into my computer (and the store before).
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter 2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot) 2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor) 3. Extend (still black screen and cursor) 4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
I don't know what to do. I've tried everything. I am literally about to break down crying. I've been at this for six and a half hours now. I've completely run out of space on my 320GB hard drive, and I've been trying to clone to my new 1TB since I got home from work.
I've currently got windows 10 on a small HDD that I need to transfer to my newer, bigger drive. I do have multiple hard drive slots, as I need the OS on the big one. Don't ask why, it's complicated. Point is, I can't use the little one anymore and I need the OS as well as my files on the big guy.
I've tried 2 different cloning programs, each one taking ages to finish copying. The problem is, everywhere I go says the reason I have blackscreen when I try to boot is because I'm missing the 100MB hidden boot partition. But it's sitting right there.
I've tried booting with only the new HDD installed, tried 100 boot and BIOS settings, different slots, completely formatting the new HDD and starting over from scratch with the same program and a different one.
I've even tried booting from a recovery disk. That won't work either, and gives me the same black screen with a single horizontal bar blinking in the top left corner.
When I boot my pc sometimes I get a black screen. But by pressing ctr alt & delete I can log out, and then login and its then OK. I have reset my pc but its still the same.
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
So.. I screwed up.. I used a small program called something like Windows 10 Login Background Changer (something along those lines) and when I restarted my computer, it never reached the login screen. I can move the mouse and open Magnifier (was pushing random controls), but I don't know how to get past here.
I downloaded windows 10 on my laptop today and now I have a black screen. I have shut down my laptop and restarted it and the windows emblem comes up then goes to black screen again.
I have acer aspire 5740 laplop, core i3 ..... A problem occured extending c windows drive as described below. It have 3 local drives
c - 20gbboot primary drive d - 90 gb system , primary drive e - 50 gb logical
Some unallocated space, I was extending c ,by deleting drive d ,at the deleting drive it, gives warning, that if you delete drive d , may your system not get start, i deleted, sudden restarting windows, displaying operating system not found, i tried to install new windows, no booting, after 2 trial, it showing black screen , i have tried some soln as per knowledge ram reset, ms dos boot usb drive. but nothing happened, laptop get normal heat, felt like hardrive boot.
Computer boots to windows log on,have no password here.After a minute on log on it go to a black screen,stays there forever. I can get to Task Manager from black Screen,lost on what to do next. Just want my Windows 10 back, not sure what caused this problem.
During boot up I get a black screen for about 1 min then the login for my account. I notice a lot of hard drive activity during the black screen. I'm using amd-catalyst-15.10beta-64bit-win10-win8.1-win7-oct12.exe (latest one).
Win 10 works fine except for the black screen. I've had this black screen since day one but it seems to be longer. I have tried AMD 15.7.1 driver.
I don't have an on board graphics.
I'm almost thinking of grabbing another hard drive and do a clean install and see if that fixes it.
