Seagate FreeAgent Not Recognized
Aug 12, 2015
I have installed Win 10 with some problems but most of it is settling down now. I noticed that my FreeAgent desktop external drive is not recognized by the system. My original 2008 was replaced in 2012 with model ST305004FDAIEI-RK. I don't find this model# on the Win10 compatibility list but there are some very similar. I downloaded the Seagate software but when I run the program it tells me that no external drive has been located. There is no device driver and I don't know how to get one.
View 15 Replies
Similar Messages:
Aug 7, 2015
Why does my 4tb Seagate Expansion go to sleep when idle? On WIN7 it'll just rest and the LED stays on. On WIN10 however, it just switches off altogether. Do I want that feature switched off? If yes, how do I turn it off?
View 1 Replies
Sep 24, 2015
I have a Seagate 1TB USB 3.0 Expansion Drive (see signature for other hardware.) Ever since I upgraded to Windows 10, it has an annoying habit of disconnecting and then remounting. When it remounts, Windows Explorer pops up over whatever I'm doing, even full screen activities like gaming or video playback.
It worked fine under Windows 7, and seems to exhibit no problems whatsoever under Linux, to it doesn't appear to be a hardware problem. Maybe there's just a way to keep Windows Explorer from popping up when it remounts?
View 1 Replies
Aug 15, 2015
I just moved from 64 bit Windows 7 to 10 so I backed everything on my 4TB Seagate Backup Plus external drive. I also have Carbonite so all is not lost if it comes to that. I made a base Image using Macrium Reflect that I still would like to get back though.
Anyway the drive was working fine until I remotely (from my chair downstairs) was doing things on my PC. I occasionally take over my computer remotely if I'm watching tv and remember I need to do something. So I was in the process of moving files from the Backup Plus to Windows 10 that's when the drive locked up. I went upstairs and got on my computer and found out Windows 10 was now not recognizing the Backup Plus. Rebooting didn't work so I shut the drive off overnight and plugged it back in today but now get "The file or directory is corrupted and unreadable".
Disk Management shows ok and I ran Seagate's SeaTools for Windows in "Short Drive Self Test" mode and it also shows 'Pass".
I tried Recuva and a scan showed a lot of files but I'm not exactly sure how to use this... I set option to scan for undeleted files. I then made a folder on my C drive desktop to dump everything but then it says "These file names are too long to be recovered to the selected destination (634). Do you want to change the destination folder." Anyway so where is it wanting me to put everything?
What are the steps (and software) I should be doing to (1) recover my files and (2) what I need to do to use the Backup Plus drive again.
View 3 Replies
Dec 22, 2015
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 Replies
Aug 10, 2015
Ever since I installed Windows 10 my Seagate Free agent back-up drive doesn't work. When I try to back-up my computer the Seagate manager says there's no drive connected. When I look on the file explorer the Seagate drive shows. but the the Seagate manager still shows no drives connected.
Is this a compatibility issue with Windows 10, or am I missing something?
View 5 Replies
Mar 23, 2016
So after rebuilding my desktop, I boot everything up and do all the right things(drivers updated and whatnot). Before I do this though I make sure all of my USB plugins are in the exact same place they were in on the old machine(This probably doesn't mean anything but Im neurotic). I go to access my external and I can't find it! I go into the bios and it recognizes that there is a HD attached but no drive letter or anything. I try disk manager but all i see is my 2 tb on an empty letter area.
View 4 Replies
Oct 16, 2015
Running powershell as Administrator or running the ISE as Administrator (which shows Admin at top of one of the two images) isn't returning what I am expecting for looking at tasks scheduled. What's up with the output in the images? I was running Windows 7 Home Premium and updated to Windows 10 end of July/early August. I have another thread on an issue that I haven't been able to resolve and was hoping maybe using Powershell would locate that issue (monitor turning on by itself after physically being turned off via power button at ~3am daily (probably 2:5x timeframe but it happens daily).
View 8 Replies
Jan 6, 2016
Yesterday I inserted a CD to install driver for my new headset. The CD-R open, close normally and I also heard the CD spinning. But not thing happened in my laptop at all. I checked This PC: no CD drive (before upgraded to win 10, I had installed win 8.1 and the CD dive was drive F). In Device Manager, there's no CD/DVD ROM section, even i had checked Show hidden device in View tab.I tryed every methods found online, but not fixed. Here's the details:
1. Try ALL METHODS in this link: [FIX] Optical Drives (CD/DVD) Icon Not Showing in My Computer Window - AskVG
-> nothing
2. Try to uninstall Channel 0 and 1 under IDE ATA/ATAPI Controller. But as you can see in the picture above: there are no Channels under IDE...Controller. Tryed to uninstall Intel(R) 8 Series...Controller and rebooted, nothing happen
3. Try to update drivers using IOBit Drivers Booster PRO but all drivers are up-to-date.
View 9 Replies
Jan 7, 2016
I got a 128GB Flash Drive which I proceeded to install a portable, bootable Fedora install on. Of course, naturally, since Fedora is light weight, I had all sorts of other room left over. However, when I plug the USB drive back into the main Desktop, it no longer asks me what I want to do with the USB drive, even with AutoPlay stuff disabled. It's as if the USB Drive doesn't exist.
However, I checked quickly on one of my laptops that has never seen the drive and the AutoPlay on that device immediately popped in. When I selected "view files and folders", voila, I could see the Flash Drive with a folder for the Fedora install and plenty of other open space.How can I force my computer to see this Flash Drive all over again? it's doing the same thing with the storage on my fiance's iPhone. since I can't see her phone anymore when I plug it in (even iTunes doesn't see it).
View 5 Replies
Feb 23, 2016
Error message says module not installed. After upgrading i was supposed to receive KB3051704 update to correct this problem. Is that what's wrong or something else. I need to be able to use the dvd drive. I never received the update.
View 1 Replies
Nov 25, 2015
After altering some of my account settings i now find my password is now not recognised. I know the password is correct. Unfortunately i didn't make a password recovery disc. There are no other options on the login screen i am completely locked out. Surely there must be some way of getting back in short of re-installing.
View 7 Replies
Feb 23, 2016
According to my computer, Windows7 is activated and is a genuine product. But when I attempt to download W10, it does not recognize the 25 digit Product Key. I don't know what to do.
View 8 Replies
Nov 22, 2015
I just upgraded from windows 7 64bit to Windows 10 and it will not recognise CD Drive there is nothing wrong with the CD Drive as I rolled back to Windows 7 again for a short while and it worked perfectly...
View 2 Replies
Mar 23, 2016
I am running windows 10 on my desktop and I have it hooked up to a TV to have two displays. I am using an HDMI splitter (2 Port HDMI Video Splitter from StarTech.com) but my Windows 10 is not recognizing the second display. The TV displays the same screen as my monitor but will not allow me to "extend" because not second screen is being recognized. What could be the issue?
View 1 Replies
Apr 14, 2016
I noticed recently on Teamspeak that I've got some packet loss, up to 10% at a time. This has shown itself in games as well, most notably League of Legends where my ping will be stable, yet I lose control of my character for up to five seconds at a time. I tried doing a test on pingtest.net but it says that Java doesn't seem to be installed on my browser, why? I've un-installed and re-installed Java but it still says this message: "Pingtest.net requires Java for packet loss testing, but it does not appear to be installed in your browser. Click here for assistance."
View 11 Replies
Aug 14, 2015
I recently upgraded to windows 10 with a fresh install and any device that I plug into my USB 3.0 ports do no get recognized and do not turn on. I have a Gigabyte GA-990FXA-UD3 rev4.0 motherboard.
View 1 Replies
Aug 24, 2015
I have a pre-built laptop with official W7 on it. The HD had a failure last year and since I was too busy to take care of it I gave it to a friend who just cloned it. Result, now Windows is not recognized as legit and no system feature works (including system restore, the search function, Windows updates). I still used it without problems but now I built one for myself and I'm giving the laptop to my father, and thought the best way to clean all that mess was to use the free Windows 10 upgrade to format everything and do a clean install with that.
Is there any way I can "trick" my system in thinking it's legit again so that I can get the free Windows 10 upgrade?
View 1 Replies
Feb 5, 2016
Why my windows 10 recognizes my second gpu as a removable device?
[URL] ....
View 1 Replies
Jan 27, 2015
I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 Replies
Aug 14, 2015
It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
View 9 Replies
Aug 21, 2015
I am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:
1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.
2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).
3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)
4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).
5. Windows 10 now loads less all the programs I had installed.
6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.
I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.
I have a custom built system:
Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300
How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.
View 7 Replies
Aug 6, 2015
I have a Dell Inspiron N5110 from 2011. Windows 10 is installed and working, Using it right now but with an external monitor. Found several posts about booting into a black screen but they seem to only be the case when there is a cursor floating round as well.
My problem is that when I boot up the laptop I get the windows 10 loading screen. Then it goes black and stays black. The screen is definitely on but not showing anything. And I've left it for an hour and nothing happens. But when I plug in a second monitor it works on there and seems to detect this second monitor as the only one. Once this monitor is attached, the laptop screen turns itself off and cannot be turned back on, not even to the state it was in before of just being black.
Checked and all drivers are up to date. If I change the settings, by hitting windows key and p, to extend the screen then i can drag the mouse from the second monitor into apparently nothing so I really can't tell if the computer knows about its own screen or not. Also sound is working through the laptop.
View 7 Replies
Dec 10, 2015
I recently re-installed Windows 10 on my Asus X205TA notebook using the ISO on a USB stick.It installed without a problem, but when I boot the computer now (first boot after installation), the OS does not recognise the keyboard and the mouse, so I cannot enter the required data to proceed to the next screen..
Seems like the required drivers are missing, and I am thinking a re-install may be necessary, but how to get the keyboard and mouse drivers included (inserted?) in the installation process?
View 1 Replies
Nov 15, 2015
I just installed Windows 10 upgrade to my HP laptop over Win 7. Every thing is fine but some thing strange happened.
All other WiFi connections in and around my apartment can be seen by Windows 10, except my WiFi network !! I can see a lot of SSDs in my area but can't see mine!
I can access my WiFi network from my desktop and my phone, but not from my HP laptop. Device Manager shows that my network adapter is Intel Centrino. There is, however, an exclamation mark over "Unknown Device" which needs a driver that Win 10 could not provide.
View 2 Replies
Oct 7, 2015
It's PDF-A, I think.
View 9 Replies
