I just did a fresh install of windows 10, and I have decided to try and start with a better form of organization. I want to try and keep my SSD with my OS on it as clear as possible. By doing that I wanted to keeps all my pictures and documents, videos, etc on my second hdd.
That is simple enough. What I want to know is if there is an easy way to have it set so every time I add pictures or music it stores on the secondary drive and still shows up in my "Pictures" file. How do you organize?
This is probably the most painful issue I have with Windows 10 right now (and likely previous versions as well, but I didn't have a multi-monitor setup back then).
The monitors I have are as follows: 3840x2160 (4K UHD) monitor with preferred DPI: 144 (150%)1920x1080 (Full HD) monitor with preferred DPI: 96 (100%)
Whenever one of these monitors are set as primary, all desktop applications displayed on the secondary monitor (doesn't matter which) has blurry text. Exceptions are the Windows Store Apps like Windows Store and Microsoft Edge, along with the Taskbar/Start Menu, the Taskbar/Start Menu settings screen, the Taskbar context menu, and the desktop context menu which passes the DPI test with flying colours, with crispy text on both monitors (occasionally a DPI switch bug gets in, but I can mostly ignore that). The problem is, as you can probably guess, is that >99% of the applications I use aren't Windows Store Apps.
Here are some screenshots. The "Taskbar and Start Menu Properties" text is what the text should look like while the Visual Studio 2015 text is an example of the text most desktop apps get. The blurry image is what happens when the UHD monitor is not the primary monitor. Attachment 48493Attachment 48494 Note: Both of these screenshots came from the 150% DPI monitor so it's best viewed at that (144) DPI level. The 96 DPI monitor is similarly affected.
Things I've already tried: Reinstall the graphics driver. Did this multiple times in fact for unrelated reasons.Reinstall Windows 10 (through Reset This PC recovery option). I did this for also unrelated reasons but it definitely doesn't fix this issue.Use the XP Explorer "fix". Merely worsens the problem. Adjusting Clear Type options. Alleviates the issue a bit but see next point.Disabling Clear Type on the affected monitor. The text obviously sharpens, but it's painful to read and a close inspection of the text reveals the issue isn't solved at all, only mitigated slightly.Replacing the video card. I swapped this in with my older GTX 560 Ti but it's obvious the problem remains. Both it and my current card are NVIDIAs though, so it's vaguely possible the drivers or the cards themselves are the cause. I don't have an ATI/AMD card (that still works, at least) to test the setup and every Intel iGPU I have either has only one monitor output or is incapable of handling UHD resolutions.
Things I won't try: Setting both monitors' DPI to 96. Text would become microscopic considering the UHD monitor's actual size.Use the text resizing feature instead. I'm going take a wild guess that this is not monitor-specific and would cause everything on the HD monitor to be far too large to the point that I'd rather unplug it.
Looking for multi-resolution, multi-DPI, multi-monitor setup with or without this issue? The text is painful to read on whichever is the secondary monitor right now, and is extremely apparent whenever the background is dark.
I wanted to make an image of my machine since upgrading to Windows 10 and saw it kept on including my secondary drive (which has over 600 gigs of movies). I am not able to uncheck it.
I figured what the hell and disconnected the drive.My box will not boot without the drive!
I just built this machine back in December and I used a 500GB SSD for my main drive, while I have 2 regular HDD's for storage and movies.
I turned off, "hide protected operating system files" and found the folders "Boot, Recovery, System Volume information and $Recycle Bin" all showing up!
how this drive got dragged into the install, but I certainly do not want my main drive depending on it to boot.
I don't want to change ownership of the files and delete then manually either since I have a strong feeling it will kill my system.
Windows recognizes my secondary drive, a Western Digital, SATA WD5000AAKS 500 gig. However, anytime I access it the system lags, files freeze and it acts like it's being re-cataloged. I never had this problem prior to Windows 10, and my other computers have no problem accessing the secondary drive through the Home Group.
i have dual monitor setup for windows 10. but when sleep mode on, after wake up the PC only the primary monitor is waking up. other monitor not working.
It was ok when i was using windows 8.1. but it causing problem after windows 10 installed. I already updated all drivers including display drivers.
During startup of Win 10, the options given to proceed with include Windows 10 and System Restore. I now have Win 10 on one of my laptop's internal 2.5" HDD. And I've restored to Win 7 (home premium) on my other 2.5" HDD that sometimes is temporarily in the bay of the internal drive that Win 10 is now running on.
With one of those drives in the 2.5" usb HDD enclosure, how can give the Win 10 startup window an optional link that can open and run Win 7 of the plugged in enclosure. IOW, can the startup screen be tweaked so that I can avoid temporarily putting the Win 7 HDD in the internal bay in place of the 2.5" drive that Win 10 runs on (to run Win 7 on the external drive)?
I have windows 10 pro 64 bit. I am running a 120gb SSD for my OS and a 1.5TB HDD for media and games. Whenever I put the computer in standby or sleep mode the HDD is not recognized when the computer wakes up. Upon restart the HDD is recognized and everything is groovy.
I have disable system protection on my primary (C:) which is an SSD.
When trying to enable system protection on my 1TB HDD (E:), the option is simply greyed out.
I had hoped to save writes on my SSD to increase it's lifespan, and it appears to be recommended in various SSD optimisation guides. Is it at all possible to enable system restore points to be saved on other hard drives?
I upgraded from Win 7 Pro to Win 10 Pro yesterday and so far everything works great, the only problem is that my secondary HDD always stays on. I have a 128GB SSD as my main drive and an 750GB HDD as my secondary drive for games, pictures and stuff. Since the latter runs at 7200rpm and is quite loud and my laptop is otherwise pretty much completely silent (when I turn the fan on stealth mode) I had created a power profile for studying that turns off hard drives after 1 minute of not using them and with windows 7 that worked just fine.
Now though, my secondary HDD never turns off. I checked task manager and resource monitor and found that my pagefile was on my secondary so I moved that to my SSD, but now it still doesn't turn off, even when Task manager and resource manager tell me nothing has accessed it for several minutes.
My PC has three hard drives. A Samsung solid state drive (840 series) that has windows and all games / programs on it, and two older Samsung HDD's (HD753LJ, about 7 years old) that I use to store videos, photos, music etc. It had been working fine in this configuration with Windows 7 for years.
I recently upgraded to windows 10 (in place upgrade, not a clean install) which worked OK except one of the two HDD's was not found by Windows 10. After a couple of turn off / turn back on cycles it found it and was OK for a little while. However it stopped finding it again and now hasn't worked for a few weeks.
If I boot into BIOS it lists all three hard drives as boot options, but only two come up in disk manager / device manager / my computer within Windows 10. Is this a Windows 10 problem or is the hard drive dying? (The timing would be very coincidental if it's not a windows problem).
I am trying to install the latest Windows 10 Technical Preview build (64-Bit) on my secondary HDD. I have Windows 8.1 Pro (64-Bit) installed on an SSD. I have a 1 TB Seagate HDD that I use to store games. I made a new 146GB partition on that HDD where I want to install W10. Each time I try I get the error 0x80300024. I've tried reformatting, I've tried a smaller partition that left extra space on the hard drive, etc. I'm installing using a bootable USB 3.0 flashdrive.
I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
I just upgraded to an SSD and installed a fresh copy of windows onto it. I would like to delete windows off of my old hard drive and delete the old drivers off of it as well. I have a bunch of games on it that I'd rather not have to re-download so is there any way of doing this without formatting the drive?
I just installed Windows 10 and have got a problem that has me stumped. I have two GPUs, an EVGA GTX 760 as my primary and a GTX 560 Ti running a second monitor. The 760 had no issues in the upgrade, but no matter what I do to the 560, it shows up in device manager as Code 43. I'm trying to gauge if it's an issue with the fact I have two dissimilar GPUs or a bit of software not liking that particular card. My gut says software, but I don't know exactly what. I've done some googling to the effect and seems to be I'm not the only one with troubles but didn't find a fix that worked.I don't want to roll back just yet and my 760 can pick up the slack easily, so if there's a fix on the horizon I can wait. Otherwise, I'll have to check my options.
I have an SSD (This PC) for Windows, HDD (secondary disk) for files and whatnot. Running Windows 10 64-bit Home.
I saw that you could move apps to another disk through Apps & features in Settings, so I decided to try it out.
I moved an app to my secondary disk, and it cluttered up with like 3 folders (my personal folder, WindowsApps, wpsystem). Changed my mind on this, and moved the app back to my SSD.
I tried deleting the extra folders left over...only to find out that WindowsApps can't be deleted on my secondary disk.
So, basically:
WindowsApps is completely empty on my secondary disk. I tried taking ownership, tried Unlocker, tried the administrator account, tried changing security options. They were all denied access, what to do next.
Am I stuck with this empty WindowsApps folder on my secondary disk?
I set the Storage option for Windows Store to start installing apps too my D:/ Because of that, it created a folder called WindowsApps.Now it's time that I want to delete that folder, and all access is denied.
I tried changing the permissions to my admin account and all, but I'm still not able to remove it.
Is there any way for me to remove this folder without having to reformat the drive?
My setup before the problem was: - Windows 8.1 in a 250GB SSD with Linux dual boot - Secondary 160GB HDD (fs: ntfs, type: primary) - Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
Win 10 updated automatically (unfortunately) and this morning all desktop items have moved from primary to secondary display and I can't move them back. Unrelated but any way for stopping these updates completely??
I installed windows 10 on a new SSD which is currently my drive C:. There was a windows 7 which was on drive D: but I never uninstall it. Drive D: was working normally until during boot today windows decided to do a checkdisk on drive D: (dont know the cause), which tried to repair it.
Currently I totally cannot access my drive D:. Tried to grant permission to myself to assess it but failed, keep having errors such as this ....
Since late Sep 2015 updates, I have been getting random freezes when writing files to secondary HDD via Internet Download Manager and also freezes when deleting big file in that HDD.Things done to fix but failed:
1. update Internet Download Manager to latest version 2. replaced secondary HDD 3. reformat and install Win 10 on SSD
I installed Windows 10 PRO, and played with it for some hours with no problems. I also run Intel XTU to stress it and all is good.
Now I want to connect the hard drives from my old PC but I have this problem: after a few minutes into windows or even at boot, the PC freezes with machine_check_exception blue screen - no numeric code at all.
I tried to connect an old WD 1TB disk, an old Maxtor 1TB disk and also with a brand new Samsung 850 EVO 1TB, these drives connected to different SATA ports each time.
When I detach all the drives apart of course the boot drive, the PC will start normally.
Later I tried to connect the new SSD (one SSD is M.2 boot disk, the other is SATA data disk) and I got into Windows, had the time to format the SSD data disk but then on the next boot I got the same problem.
Can the C: drive be part of a pool, having all drives (including the c: drive) look like 1 drive? If so, how do I do that? I created a storage space, but it made me set it up as drive D:, and I see no way to combine it with C:.
Next: I want to have the C:/boot drive be part of the redundancy equation. I plan to use Parity. I can see where it would be if all drives looked like 1, but I don't see how it would be if not part of the pool.
I had my systems set up to store a copy of the stuff I had on OneDrive on the local PC's under Windows 8.1. Since I upgrade to W10 that option has disappeared? Am I missing something? I have Googled and Binged and can't find anything specific to W10 and the W8 explanation ain't there no more in W10! I really liked the ability to access my OneDrive Stuff if/when the internet is down.
How do I undo storage spaces in Windows 10 Home ? I've searched but can't find information pertaining to how to reset my external drive to the way it was before storage spaces altered it making it unusable for back ups.
