Secondary Hard Drive Not Getting Recognized
Aug 23, 2015
My PC has three hard drives. A Samsung solid state drive (840 series) that has windows and all games / programs on it, and two older Samsung HDD's (HD753LJ, about 7 years old) that I use to store videos, photos, music etc. It had been working fine in this configuration with Windows 7 for years.
I recently upgraded to windows 10 (in place upgrade, not a clean install) which worked OK except one of the two HDD's was not found by Windows 10. After a couple of turn off / turn back on cycles it found it and was OK for a little while. However it stopped finding it again and now hasn't worked for a few weeks.
If I boot into BIOS it lists all three hard drives as boot options, but only two come up in disk manager / device manager / my computer within Windows 10. Is this a Windows 10 problem or is the hard drive dying? (The timing would be very coincidental if it's not a windows problem).
View 2 Replies
Similar Messages:
Jul 30, 2015
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
View 3 Replies
Aug 31, 2015
I have two hard drives in my pc. One is a small ssd for windows and the other is a large HDD for all of my programs and games.
I want office to be installed on my HDD. I bought office and downloaded the setup file but when I run it, I get no options or anything.
As soon as I open it it installs office to my ssd but I want it on the HDD. How do I install it on my HDD?
View 1 Replies
Aug 26, 2015
So as of recently I am running Windows 10 on my pc. I however noticed one thing: I have an SSD and an HDD installed.
I installed the OS on my SSD ofcourse. Now it seems that Windows 10 recognizes my SSD as a regular drive, and not as an SSD. Due to this, I am unable to install SSD drivers. I use the Samsung Evo 850 SSD.
View 1 Replies
Jul 31, 2015
I just upgraded to Windows 10 as I planned to use the weekend to sort out any issues I might encounter during the upgrade. Well boy did I ever. My Seagate 3TB drive decided it no longer wanted to be recognized by Windows anymore. It shows up as a failed/deactivated drive in Disk Management as seen here: [URL] It also shows up in Speccy as a physical drive. I currently have 2TB of data on there (including an OS image I did just before the upgrade as an extra prep step), so reformatting the volume is not an option until I get the data off.
View 9 Replies
Aug 5, 2015
I currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
View 1 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Oct 22, 2015
Windows recognizes my secondary drive, a Western Digital, SATA WD5000AAKS 500 gig. However, anytime I access it the system lags, files freeze and it acts like it's being re-cataloged. I never had this problem prior to Windows 10, and my other computers have no problem accessing the secondary drive through the Home Group.
View 2 Replies
Dec 29, 2015
I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
View 9 Replies
Feb 3, 2016
I just upgraded to an SSD and installed a fresh copy of windows onto it. I would like to delete windows off of my old hard drive and delete the old drivers off of it as well. I have a bunch of games on it that I'd rather not have to re-download so is there any way of doing this without formatting the drive?
View 1 Replies
Jan 18, 2016
I set the Storage option for Windows Store to start installing apps too my D:/ Because of that, it created a folder called WindowsApps.Now it's time that I want to delete that folder, and all access is denied.
I tried changing the permissions to my admin account and all, but I'm still not able to remove it.
Is there any way for me to remove this folder without having to reformat the drive?
View 3 Replies
Jun 21, 2015
is there a way to move the browsing cache from Microsoft Edge to a secondary drive?
View 3 Replies
Sep 21, 2015
I just built a new PC:
MSI X99A Sli Plus
PSU Cooler Master V550
5820K
DDR4 32GB
Nvidia Quadro K2200
Samsung SM951 256 GB M.2 boot drive
I installed Windows 10 PRO, and played with it for some hours with no problems. I also run Intel XTU to stress it and all is good.
Now I want to connect the hard drives from my old PC but I have this problem: after a few minutes into windows or even at boot, the PC freezes with machine_check_exception blue screen - no numeric code at all.
I tried to connect an old WD 1TB disk, an old Maxtor 1TB disk and also with a brand new Samsung 850 EVO 1TB, these drives connected to different SATA ports each time.
When I detach all the drives apart of course the boot drive, the PC will start normally.
Later I tried to connect the new SSD (one SSD is M.2 boot disk, the other is SATA data disk) and I got into Windows, had the time to format the SSD data disk but then on the next boot I got the same problem.
Could it be some UEFI settings?
View 6 Replies
Oct 13, 2015
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10
It' s a custom built pc with:
i7 4770k
GeForce GTX 770 2GB
8gb RAM
230 gb of SSD (primary drive) with still 70gb of free space
1 Terabyte of Hard disk (secondary drive)
230 gb of external TrekStore drive (NFTS formatted)
View 9 Replies
Jan 7, 2016
I got a 128GB Flash Drive which I proceeded to install a portable, bootable Fedora install on. Of course, naturally, since Fedora is light weight, I had all sorts of other room left over. However, when I plug the USB drive back into the main Desktop, it no longer asks me what I want to do with the USB drive, even with AutoPlay stuff disabled. It's as if the USB Drive doesn't exist.
However, I checked quickly on one of my laptops that has never seen the drive and the AutoPlay on that device immediately popped in. When I selected "view files and folders", voila, I could see the Flash Drive with a folder for the Fedora install and plenty of other open space.How can I force my computer to see this Flash Drive all over again? it's doing the same thing with the storage on my fiance's iPhone. since I can't see her phone anymore when I plug it in (even iTunes doesn't see it).
View 5 Replies
Feb 23, 2016
Error message says module not installed. After upgrading i was supposed to receive KB3051704 update to correct this problem. Is that what's wrong or something else. I need to be able to use the dvd drive. I never received the update.
View 1 Replies
Nov 22, 2015
I just upgraded from windows 7 64bit to Windows 10 and it will not recognise CD Drive there is nothing wrong with the CD Drive as I rolled back to Windows 7 again for a short while and it worked perfectly...
View 2 Replies
Jan 27, 2015
I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 Replies
Aug 14, 2015
It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
View 9 Replies
Aug 5, 2015
I have downloaded Win10 onto my laptop. The DVD is: UltraNote Series: 8x SATA DVD-R/RW/Dual Layer (+ 24x CD-RW)
I thought that everything was fine after I had re loaded Norton which had disappeared. All other icons and programmes were intact. I then attempted to load another program via a disc but found that win 10 doesn't know that the drive exists.
I am using my PC with win 7 to type this info.
View 1 Replies
Aug 8, 2015
Yesterday, Friday 7, 2015 I upgraded by computer to the Windows 10 operating system from Windows 7. Since then, however, my CD/DVD drive is not detected and/or recognized.
The icon on my device manager has a icon of Media with a ? mark on it and when I click on it blank.
I have looked under Device Manager for the CD/DVD drive, and there's nothing there.
View 1 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Feb 3, 2016
I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.
The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.
The drive is a Samsung SH-223L.
Autoplay is ON
View 2 Replies
Feb 10, 2016
The DVD drive worked fine prior to installing Win 10 - now the computer doesn't recognize it. Win 10 apparently thinks it is a removable drive. The CD-DVD drive is recognized in BIOS.
How do I diagnose the problem?
View 9 Replies
Feb 1, 2016
My dvd player drive isn't listed and when you try and play a dvd the player spins but doesn't play anything since upgrading to windows 10. I have checked in device manager and it says device is working properly. I have also done the upgrade driver and it says I have the latest driver.
View 2 Replies
Feb 8, 2016
When I changed my pc case I didn't bother to hook up my optical drive because I didn't really use it. today i went to hook it up and it works fine but it wont show up in file explorer. it only shows my c drive. is there a reason for this? my drive is ASUS 24X DVD Burner ...
View 1 Replies
