Security :: Bitlocker - Does Not Reset And Recovery Key Not Available
Oct 31, 2015
When I switched my laptop on a few hours ago it stated bit locker and key needed. I've tried to reset and remove all personal files (all my files are saved on cloud) but their 'was a problem resetting pc'. Then tried to get key (using internet on phone) but their was an error from Windows when I tried to input password for accessing cloud. However I can access my cloud through the app on my phone without any problems.
Called a pc repair service and they said the only option was to wait until I Windows could give me a recovery key.
View 7 Replies
Similar Messages:
Jan 1, 2016
I clean installed windows 10 on my pc that has three partitions. There is no recovery partition (checked with disk management). How will refresh and reset options work - what do I need for them to work
View 2 Replies
Oct 20, 2015
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 Replies
Aug 14, 2015
With Windows 7 my security scan took less than an hour. With Windows 10 it takes 3 hours. What's the deal?
View 3 Replies
Jan 5, 2016
Recent problem(might be after updates 12-24). Cannot access windows update.
View 3 Replies
Feb 10, 2016
I used CLEAN in DISKPART and i delete all partitions of my only disk.
Now i dont have any OS on my laptop and i want recover partition by "Partition Wizard" or "Test Disk" that can boot from CD but i fear that this bootable program overwrite on my only disk to load itself and some part of my data will be lost.
View 5 Replies
Oct 8, 2015
I have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
View 1 Replies
Feb 10, 2016
So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 Replies
Dec 16, 2015
I have read, on the Internet, that Bitlocker can be got into, without using the password, by 'experts using encryption breaking tools.
I use a 13 part password, incorporating upper case & lower case letters, numbers and special (punctuation?) symbols.
So, just how secure is Bitlocker?
View 5 Replies
Mar 5, 2016
I have a usb that has been encrypted using bitlocker, I can connect this usb to my desktop and I can input the password and access the usb. However on my laptop and other computers, when I plug in the usb I do not get the prompt to input my password and instead just says that the drive is inaccessible. Both my laptop and my desktop are windows 10 and I have admin rights on both machines. On both machines I have not used bitlocker, how I can access my usb on normal machines and how I can open my usb on my desktop but not my laptop?
View 2 Replies
Jan 25, 2016
I have tried everything I think, but obviously not.
Cannot open TPM, pop up tells me I do not Have at least 1.2. Cannot open Bit locker until I complete TPM wizard and assign myself as administrator??. then I can open Bit locker and proceed to encrypt my hard drive??
Is there a download for 1.2++ or is it a hardware addition..
View 9 Replies
Nov 11, 2015
I want to use Bitlocker on my Non System E Drive without TPM. I read somewhere to do the following for without TPM:
" Under Local Computer Policy navigate to Computer Configuration Administrative Templates Windows Components Bit Locker Drive Encryption Operating System Drives and double click on Require additional authentication at startup." and so on.
but I am confused because the above note is mentioning "Operating System Drives " wherein I want to turn on Bitlocker on Non System Drive.
Can we turn bitlocker "on" on Non System Drives without turning it "on" on System Drives and Can we turn it "on" on a Single Folder instead of Drive.
View 7 Replies
Aug 20, 2015
McAfee software not operating correctly. Do I need to contact their support?
View 1 Replies
Oct 7, 2015
I enabled the boot to startup settings option in winaero and now my computer boots to bitlocker. I checked online and I don't have the key for it. What can I do? (Computer is surface pro 3 i5 4g of ram)
View 1 Replies
Jan 3, 2016
I just installed Win10 Pro and I love it. When I enabled BitLocker, I selected to encrypt the Entire drive instead of the Used Space because I just feel I am safer with encrypting the entire drive. And my drive is not new. It had Win7 running before.
So I did a clean install of Win10 pro with BitLocker enabled to set to encrypt the ENTIRE drive. The encryption process took 7 hours to complete on a 300GB internal disk drive
When I had Win7 (and even Win8.1), it did not take that long to encrypt and I have the same exact internal drive. In Win7, the whole process took 1 hour. And with Win8.1 took a bit more time, but not 7 hours...
Why is entire disk encryption takes this long on Win10?
And also, I do not have a whole lot of programs installed. I have like 6 programs installed and there not that huge in size.
View 4 Replies
Oct 24, 2015
Current Windows 10 (build 10240): I'm trying to turn on Bitlocker on my system drive, an SSD. During Bitlocker's preparation, shrinking the volume, I get error 0x80042574, and Bitlocker enabling will not proceed. The SSD reports 46.5 GB free out of 238 GB, and scanning it reports no errors.
(This is a UEFI system, and the system SSD has a 100 MB EFI system partition.)
View 3 Replies
Oct 29, 2015
I get this BSOD while unlocking storage drives. My OS is on a Vertex 4 SSD My storage drives are on HDD. I would say I have 50% chance of a BSOD unlocking drives.
View 3 Replies
Jan 23, 2016
If I enable Bitlocker with TPM (i.e. no passcode required on boot-up), and I have the Local Administrator account enabled on the machine (with my normal user account as a standard account), would it be possible for someone with a Hirens Boot CD blank/reset the Local Administrator account password and then gain access to the PC/Laptop using a tool such as this: Offline Windows Password & Registry Editor
Should I be enabling the PIN/Password protection on BitLocker, or does BitLocker prevent these sorts of tools from being used?
View 1 Replies
Nov 17, 2015
This morning I tried to login to my windows machine, windows 10 pro, intel i5 3.30ghz, 12gb RAM, 2TB HD. and kept telling me password was incorrect. I then removed windows password thru other admin user, and now all external hd's except for c: drive all lecked by bitlocker. Never installed or activated it.
I have 2 internal sata drives and 2 usb drives locked. I have gone to control panel, bitlocker, and tried to unlock drives, tried to do a search for key id on pc and nothing is found. My raw files are in the backup drives.
View 14 Replies
Nov 30, 2015
I am running Windows 10 Pro. I am using BitLocker on a non-system drive and not on my system drive. I am not planning on using it on my system drive. I do not have a TPM compatible computer.
Once I log into Windows, I would like to be prompted for the password to unlock my data drive. I did have this running correctly before I started having problems with my computer and had to do a clean install of Windows 10. I have searched for hours but can't find the article that walked me through how to do this.
I found a ton of articles that don't fit my situation because I don't want to auto-unlock, use a USB key or encrypt my system drive.
View 3 Replies
Nov 16, 2015
My query is regarding a brand new i7 sixth generation computer with Windows 10 Professional, including all the Windows upgrades, and a new Samsung SSD hard-drive.
The reason I bought Windows 10 Professional was for the full hard-drive encryption provided by Bitlocker in case my computer gets lost or stolen, as has happened to me previously. However, I have an ongoing problem with it and can't find a solution anywhere. I have tried to telephone Microsoft's telephone support several times but it has been beyond a joke with their outsource staff in far-flung countries with poor English claiming Windows 10 Professional does not have the option of Bitlocker or any form of encryption to all kinds of other absurdities.
Whenever I start my computer it does not ask me to enter a Bitlocker username or password (I am asked for the Windows password, but, as everyone knows, those are not totally secure and do no protect hard-drive data access). Also, in the Bitlocker section in Control Panel, I am not giving the option to edit a Bitlocker password, even though that option exists in all the other screenshots I have seen on the web.
How can I set my computer up to present me with a Bitlocker password on boot-up?
My system does say my hard-drive is encrypted, but how can I certain of that if there is not even password protection?
Here is what I see in my Windows Control Panel > Bitlocker section:
I note the warning message about rights being restricted to the system adminstrator, but I am the system adminstrator and have double-checked that.
View 9 Replies
Oct 28, 2015
Yesterday I was decrypting my USb drive which have Bit-locker encryption and at 10% decryption I got some error(Error not at decryption process, error at windows) and decryption just stopped responding.
Now when I insert that drive and try to unlock with correct password, or with the correct recovery key, Its not unlocking. Says "This password is incorrect".What could I do now?
View 3 Replies
Oct 14, 2015
I have been using BitLocker for a long time now and in conjunction with Windows 10 for 3 months and today something weird happened. When I tried to insert my password at boot, when I pressed the Shift key in combination with any other key, it inserted tens of characters at once. Valid with any character I press while Shift is also pressed. I tried a different keyboard, same result. I removed Bitlocker and reinstalled it, same result. Reboots, etc. I tried it all.
Now the only way to input the password is to press Insert so I can see the characters, press CapsLock for the capital letters and delete all the additional 30+ characters that appear when shift is pressed.
View 8 Replies
Nov 1, 2015
Removed registered users from allowed users under security properties for my external. Now I can't fully access even with administrator account. Can see root, but can't access individual directories. Originally, I wanted only one user to have access, not other accounts.
View 1 Replies
May 23, 2015
whenever i am on Windows 10 i get a constant popup that says that if i want to connect to the server i have to update my security settings. I then have two buttons: cancel and execute. Whichever i push makes no difference; the popup keeps appearing disrupting everything. Which server my computer is referring to. I am on build 10122 but this behavior was there on previous builds as well. When i return to 8.1 (dual boot) the problem is gone.
View 9 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
