Send Audio Signal Of TV To Samsung Multiroom Speakers?

Mar 14, 2016

Is it possible to send the audio signal of my (no smart) tv set to my Samsung Multiroom speakers and if yes, how?

View 1 Replies


Similar Messages:


Lost Audio After Clean Install On HP Envy TS M7-J120DX With Beats Audio Quad Speakers And Two Subwoofers

Jul 31, 2015

My PC is the HP ENVY TouchSmart M7-J120DX with Beats Audio quad speakers and two subwoofers. After running a clean installation of Windows 10, my volume icon had an error "no audio device output" / IDT High Definition Audio Codec. The troubleshooting option did nothing. I uninstalled my audio device, and restarted my pc. My sound is back, but it seems that the middle speakers are the only ones working. My volume icon and sound device now is labeled "High Definition Audio Device" which now sounds substandard, just like those cheap tinny speakers you can find at the dollar store. How to recover my original great-sounding original speakers!

View 4 Replies

Realtek HD Audio Identifies Headphones As Speakers?

Oct 19, 2015

Realtek HD Changing Jack output reassignments ( FIX ) - I found this old thread but Its not useful because my regedit index doesn't look the same as theirs.

I don't have a "DevType_0888_SS147b1083" or "DevType_0885_SS18490890" folder in "HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E96C-E325-11CE-BFC1-08002BE10318}000Settings"

Mine is named "Drv7541_DevType_0889_SS10438418" and I don't know which files I'm supposed to edit there.

This is what it looks like....

View 3 Replies

Audio Video Plays In Slow Motion When Using Certain Speakers?

Dec 10, 2015

I recently opted for the free Windows 10 upgrade (still debating if it was worth it) from a Windows 7. Long story short, there was a new problem every day so I just wiped everything and did a clean install hoping the old windows 7 files would stop clashing with the new windows 10 files. All went well and was working fine when boom my speakers start acting up. Don't know what I did to trigger it, it just started doing this.

Basically, when using my USB connected headset, everything runs fine, sounds nice, no problems. When I change over to my desktop speakers though, all audio and video goes into "slow motion" and makes obnoxious sounds. Computer doesn't lag, just audio and video for YouTube, games, etc.

I've tried reinstalling drivers via device manager and it says it's all up to date. I just tried installing Realtek audio driver manually and now it won't even play sound through the speakers. I know the speakers are fine because they sound beautiful when plugged into my ps4.

Update: After installing Realtek and doing a restart, the speakers are in fact making sound, but now it's also extremely quiet and scratchy. Had to crank it to max just to hear anything.

Update: May have fixed my problem, at least temporarily.

I went to device manager and deleted the speakers then restarted so that it would auto reinstall them. Seems to work fine again...

Update: As I had guessed, it was only temporary. Sound and video just started going all slow motion again. Back to square one and back to the drawing board...

View 1 Replies

Drivers/Hardware :: VIA HD Audio Doesn't Switch Between Speakers / Headphones?

Aug 15, 2015

I recently updated to Win 10, and the first thing I noticed was that the sound settings were weird. Both speakers and headphone sounds work perfectly fine, but they don't automatically switch when I plug/unplug the headphones. I have to manually go into sound and set one device or another to default.

View 9 Replies

Realtek High Definition Audio (No Sound Through Laptop Speakers)

Aug 4, 2015

I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.

This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.

I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?

[URL] ....

View 1 Replies

Asus Realtek HD Manager - Separate Audio Through Speakers And Headphones

Aug 8, 2015

I have recently installed window's 10 and have only recently discovered a program called realtek HD Audio manager. I would like to have separate audio through speakers and headphones, but the realtek only allows me to hear audio through one audio source. is there a way to separate the two so i can have audio (music etc) and have Skype run through my headphones. this problem only occurred after installing windows 10.

View 1 Replies

Apps :: Software To Send Audio FROM Phone To TV / Chromecast

Feb 10, 2016

Seems plenty of stuff around to GET audio from TV TO a phone --I'd like it the OTHER way around --FROM PHONE TO TV.

I can use Bluetooth for a Bluetooth speaker - but Bluetooth is pretty horrible compared with decent HD audio -- and the top end phones have quite decent DAC's in them making transmitting HD Audio worthwhile.

I want it primarily to CAST Internet radio streams (.OPML streams) to my TV speakers - chromecast should be able to receive the audio.

I have no problem with local Audio FILES (using PLEX) and VIDEO (again using PLEX) but there's no option for capturing and streaming Internet radio either.

There's a Tunein app on the phone that can do it (sort of) but the interface is so horrible (can't select stations by genre etc and no way to save favourites for example) so if I can stream the audio output from my phone which captures Internet streams from Logitech media server and Cantata / MPD streams I'd be happy.

So, it's from PHONE TO TV not the other way around. I've got the latest Chromecast device too.

Here's the sort of stream I want -- I like the Football (Soccer) stuff from BBC R5 Live

line URL="http://opml.radiotime.com/Tune.ashx?id=s24943&formats=aac,ogg,mp3,wmpro,wma,wmvoice&partnerId=16&serial=1a20f32a2c 429a2f4027ab0d4ed25c17" icon="http://radiotime-logos.s3.amazonaws.com/s24943q.png" text="BBC Radio 5 live 909 (News)" type="audio" />

Not sure how to fiddle with PLEX to get that into a playable stream --

View 2 Replies

Drivers/Hardware :: No Audio From Speakers - Failed To Play Test Tone

Aug 5, 2015

I have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.

When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.

View 3 Replies

Drivers/Hardware :: Only 2 Speakers Work Out Of 6 - Logitech X350 Audio System

Sep 3, 2015

I registered today to seek for a solution to this annoying problem. I have the Logitech x350 Audio system, with 6 speakers and one sub-woofer and they worked pretty well on my former OS, Windows 8.1 x64.

Now I am currently using W10 and have used the same driver as before. However, analog output has become unchangeable, just like in this image.

I really want to use all of my speakers, as I was able to before. Only two of them work properly. I tried changing them from the Playback devices in my audio panel, but that doesn't work either.

View 4 Replies

(send) Command On Word Requires Use Of Microsoft Exchange To Send As Email

Sep 8, 2015

Having changed from windows 7 to windows 10 MS word now requires one to log into Microsoft Exchange to obtain address book MS exchange apparently is now required (at a PRICE) to send an E mails direct from MS word. 

View 1 Replies

Cannot Use Recovery Partition On New Cloned Samsung 850 Pro SSD

Dec 13, 2015

i recently upgraded my hard drive to a new samsung 850 pro ssd 512 gb . i used the samsung migration software and it all went smooth , i checked the newly installed ssd in disk management and it shows that it copied all three partitions which are, 500mb healthy ( recovery partition) .........260mb healthy (EFI system partition) and windows (c 476.18gb NTFS healthy (boot,page file, crash Dump, primary partition) .

Everything seemed to be working fine until tonight when i had a ethernet problem which turned out to be one of my ports on my router going bad . but before i realised that all i needed to do was try a different port on my router i tried resetting my pc to factory settings but it would not let me do it with the new ssd drive so i then tried making a recovery usb flash drive but windows said it could not do it because files were missing .

So even though it shows that i have a recovery partition in computer management i cannot use it . i have not got a clue on how to fix this problem with the new ssd . i swapped the old hard drive back in to the pc and tried to make a system recovery usb drive and it worked fine so why cant i do this from the new ssd and why would files be missing from the newly cloned disk ?

i7 6700k
asrock z170 pro4s motherboard
32gb ram
gtx 980 TI
wd blue 3tb drive for storing music and games
samsung 512gb evo pro ssd boot drive
windows 10 operating system

View 6 Replies

Installation :: OS Does Not Reboot After Installed On New Samsung SSD

Oct 17, 2015

I've just bought a new SSD (Samsung EVO 850 250GB) for my Dell XPS 15 (L521x). After I inserted it into my laptop i intalled Windows 10 Home Pro. The installation process happened without any error, the laptop restarted several times (which is normal during the installation) and then booted to the desktop. again, no error whatsover. now, when i try to turn off or reboot my laptop, it is not able to power off automatically (i've waited for over an hour). so i have to power it off forcefully by pressing the power button for several seconds). if i want to reboot the laptop, it gets stuck at the dell logo, the little circle is spinning but nothing else is happening. i have updated all drivers, tried to boot into safe-mode, nothing worked

The current bios version is up to date (A16), SATA operation mode is AHCI, according to Samsung Magician (which i was able to install) everything is configured correctly.

View 1 Replies

Drivers/Hardware :: Samsung MSATA SSD Only Show 113 / 250 GB?

Jan 31, 2016

My SSD is mysteriously missing a ton of space..It is my C: drive with Windows 10 Pro installed on it.

I put the SSD in, while using Windows7, anyway, I got Win 10 (clean install from scratch), Cloned from HDD to SSD, moved around the boot order (In BIOS the drive is called a Samsung EVO 250)

Only 113 of 250 showing. Where is all my space hiding!?

Figuring the paging and hibernation bits can't possibly account for 137Gb...?

View 9 Replies

Drivers/Hardware :: CDs Not Recognized In DVD / CD Samsung Drive

Feb 3, 2016

I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.

The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.

The drive is a Samsung SH-223L.

Autoplay is ON

View 2 Replies

Drivers :: Unable To Install Samsung Printer

Oct 29, 2015

New to 10 and unable to install Samsung printer ML1210. printer remains offline but shows samsung universal printer driver installed. I understand this is a recognised problem

View 1 Replies

No Signal To Monitor?

Sep 1, 2015

Basically, after installing windows 10 I turn on the computer, and it works. But my TV which I run through HDMI to my computer shows and says "no signal". SIDE NOTE: when I turn on my computer my computer runs awfully quiet. For a few seconds I hear something get loud but then it dies down. 

View 1 Replies

Installation :: Can't Get Rid Of Message Regarding Fast Booting On Samsung Notebook

Aug 8, 2015

Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?

View 3 Replies

Unable To Turn Off Fast Start On Samsung Computer

Nov 23, 2015

I recently upgraded my SENS 900X Samsung laptop from Windows 7 Home Premium to Windows 10. I did the easy upgrade, not a clean install. I did reformat my computer while it was in Windows 7, updated it, then upgraded to Windows 10.

When I turn on or restart my computer, I get a message which says:

I found : Link: Fast Startup - Turn On or Off in Windows 10

However, after performing step 3, I get this message: "Your power plan information isn't available. Access is denied."

View 9 Replies

Installation :: Samsung Laptop - Blocking Window Updates

Oct 12, 2015

I have just learned that Samsung have installed a program that blocks Windows Updates. I am trying to get the Windows 10 upgrade notification and came across an article about this. How I can unblock this Samsung install so that I am able to upgrade to Windows 10?

View 7 Replies

Drivers/Hardware :: Samsung External Hard Drive?

Feb 10, 2016

I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.

View 9 Replies

Drivers/Hardware :: Driver For Samsung SD590C HD Monitor?

Jan 26, 2016

I've just bought a fancy new curved screen HD Samsung monitor, but can't get it to work with my Windows 10 PC. Samsung tell me that they haven't released a Windows 10 driver yet, but that it should work with the basic Windows 10 driver. It doesn't.

View 4 Replies

Cannot Download Any Pictures From Samsung Galaxy Phone To The Computer

Sep 1, 2015

After installing windows 10 I cannot download any pictures from the Samsung Galaxy phone to the computer. It had worked fine when I had Windows 8.1 but know it wont even recognize that I have the phone attached?

View 9 Replies

Networking :: Low Wireless Signal

Oct 11, 2015

Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.

I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?

View 9 Replies

Input Signal Out Of Range

Jan 25, 2016

Sometimes when turning pc on I get a popup saying input signal out of range change settings to 1600x900-60hz and when pc comes on everything is magnified then after rebooting several times screen returns to normal?

View 1 Replies

Maxx Audio Not Working With Realtek HD Audio?

Aug 2, 2015

ever since I got windows 10 my maxx audio doesn't work and now just says "MaxxAudio processes internal speakers output only"

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved