I am in the process of attempting to install Windows 10 on the system listed in my profile. I have downloaded Windows 10 as an ISO and transferred this to an NTFS formatted memory stick. The installation process works ok but I am having problems getting the SSD setup for UEFI mode and secure boot. what settings I need to apply under CSM to get the SSD running in UEFI mode? And if there are any other settings needed?
View 2 RepliesIt sometimes (not always) happens when I need to change a UEFI setting. When it's happening the screen turns black and the computer tries to reboot. Note that the computer does not crash to the point of a memory dump. When this happens I have to keep trying to reboot and eventually it loads the default Bios settings and boots.
I have so far replaced the memory, PSU and motherboard to no avail. Once the computer does boot, everything seems perfectly stable. I noticed a new Bios update and flashed it to my motherboard, but I do not yet know if it fixed things.
How do you access UEFI (BIOS) in windows 10? I don't have a PS2 connector on my computer only a USB keyboard.
View 1 RepliesI just upgraded to Win10. I am using the computer as a HTPC and need the PC to boot up automatically each day so it can runs some scripts. I have been doing this by enabling the computer to automatically boot up within the UEFI . This no longer works after the Win 10 upgrade.
View 3 RepliesI just brought a 128GB sandisk ultra usb 3.0 because as a computer tec im tired of fumbling through my tons of usb drivers to do a job. , i want my windows installers & Linux, bookable tools and such all in one usb. so i looked into multibooting usbs and came across many tools, one being SARDU. But i need a hybird UEFI/MBR boot and my laptop doesn't support uefi & legacy simultaneously only one or the other.
So using SARDU i cant see or boot from the usb unless i switch bios to legacy mode, works well because i see and can boot from all of what i have windows installers and linux distros but i have to keep switching back and forth between legacy and uefi. i was wondering if i can make the usb primarily Uefi bootable BUT also bootable for a old MBR if needed.
So Im trying to install a new graphics card, and I have to tweak some settings in the bios. Unfortunately, when I try to open it(pressing escape at startup, scrolling down, and selecting uefi settings and pressing enter) nothing happens. I looked this up, and it said to go to advanced startup and go through some steps to get to a menu that supposedly contains "uefi firmware settings". Now, I confirmed that this is the right menu, but the option is just not there. I thought about updating my BIOS, but there are no updates for it available.
View 9 RepliesI'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
View 4 RepliesIn Windows 8 there a way to change settings in your PC's UEFI firmware. Is this possible in W10?
View 1 RepliesI have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then made sure drivers were updated. However, I did not upgrade my BIOs, from the information I had seen from MSFT. Didn't think twice, since they said if you were upgrading from 8 or 8.1 that should not be an issue. The system was running stable, after I did those fixes.
About 1 week ago, after a MSFT Windows automatic patch push, My monitor started not to respond during boot up. Ran some basic troubleshooting for the monitor (Ie: check plugs, check cables, check Video card). They all seemed to work fine and my system booted up normal.
The very next day, cold booted again and monitor did same thing, it was not getting any signal from the computer. Went through the checks, after a little bit of a delay the system finally booted. I checked my BIOs settings, which were all set up normally. I locked my computer after that and did not turn off the system, the next morning, my monitor was unresponsive.
I re-checked monitor, cables and even replaced the video card. Everything is good except no signal to my monitor. I disconnected all hardware except the video card and motherboard, to see if it was an issue with my power. I took out out the CMOS battery and also disconnected power to the motherboard for about 2 hours, to try and reset the BIOs to factory. No luck.
This leaves me with 2 things left:
a) Corrupted BIOs, not loading my drivers, or
b) motherboard went bad.
Going to try a bootable USB BIOs next.
Downloaded Windows 10 ISO, created a bootable flash drive using "Windows 7 USB DVD download tool" which I also got from Microsoft.
Set first boot device to USB in BIOS.
Saved changes and turned laptop off.
Turned it back on, with the flash drive plugged in, but computer boots to Windows 8.1 instead of the Windows 10 installation.
Restarted again, and pressed F9 to show a list of boot devices, it just shows OS boot manager, and DVD drive, not the flash drive.
Tried with Windows 8.1 USB installer, same thing happens.
Went back to BIOS, enabled "Legacy Mode" and turned off "Secure Boot", restarted, the computer can now boot to the USB stick.. for both Windows 8.1, and Windows 10.
Disabled Legacy Support, the computer fails to boot to USB devices again.
So, I cannot boot to a USB device if I have Legacy Mode disabled in my BIOS.And if I boot using Legacy Mode, Windows wants to convert my GPT HDD to MBR.
How do I boot to USB using UEFI instead of Legacy?
Other than slightly faster boot and wake from sleep, does UEFI have any real runtime advantages over legacy boot?
View 1 RepliesJust converted my systems to Windows 10. Working well, so far. I would like to install 4TB disks on a couple of the systems and understand that I need to use UEFI. Looks like my ASUS P8Z68-U GEN 3 MB supports UEFI, but I don't understand how to enable it. The other system has ASUS B85M-E mother board. I've seen some one paragraph descriptions, but they don't really walk me through the process.
1 - Can I upgrade my existing system without a complete Windows 10 reinstall? I have lots of apps installed so I'd like to avoid complete system rebuilds.
2 - Due to legacy use of Mirrored drives, I'm using the Intel RAID stuff, although I no longer need it. Will that be a problem? SSD and other disks are JBOD. I'd like to get rid of that, but I think that does require a complete system reinstall since disabling the RAID wipes the disk.
Looking for step by step process to convert a system to UEFI to support 4TB disks?
i've installed windows 10 on linux before and i've never had any problems booting it (from what i remember, through UEFI boot sources). currently the windows 10 iso seems to be the only one that isn't appearing in UEFI; i installed peppermint from lubuntu using the same image disk writer on the same usb 30 minutes ago.am i supposed to have some specific settings enabled/disabled in my bios to boot the windows install? secure boot is disabled and legacy boot is enabled.
View 2 Repliesi had secure boot up and running on my windows 8.1 machine after a clean install, but now since Microsoft upgraded me to windows 10 it seems as my secure boot is off again, but it's enabled in my bios is so weird, it's enabled in bios but off in windows 10? Is not much of a big deal to me in a since but just wondering why it still shows as on in bios but off in windows 10.
View 9 RepliesI've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
Assume a computer with the UEFI firmware interface.
Assume that during or after a user has upgraded a W8.1 machine to W10 things go horribly wrong - Black screen, Blue screen, No screen. The user now tries to Boot from a USB Emergency Boot Disk that they previously created using the W8.1 utility and then they try to restore W8.1 from a System Image Backup (the one in File History) that they previously created.
Will this be possible and will the Product Key in the UEFI firmware allow a reinstall of W8.1 after a W10 upgrade...?
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
After resetting UEFI to default values, I can't start WIndows because boot goes to UEFI.
I wanted to make a clean install of W10 and for that I had to make some changes in UEFI because it wouldn't allow me otherwise. But after the installation I see that I have some problems with the sleep and fast boot, not working well. So I went to UEFI and reset it to default, saved and exit. On boot, it goes to UEFI once and again. Windows doesn't load.
So I have to do the same changes that I had to do for installing W10. Disable fast boot, etc. And then yes, I get to Windows, but keep having the same sleep and boot problems. Both work really bad in different ways.
I also did other changes, by the way. I couldn't install W10 because it said that my disk was GPT partition style, so I had to follow some instructions to change that, which wiped my disk and partitions completely and maybe I missed some step...
I have a Toshiba Satellite m645 with Windows 10. I'm seriously trying everything just to access the UEFI/BIOS settings on this computer. I know that you have to go to Update & Security and reboot through the advanced settings. Then you click troubleshoot and in that menu should hold a uefi settings option but my computer just doesn't and I'm not able to press esc/f2 on startup to access bios either because that simply doesn't work. Why don't I have a uefi settings option?
View 4 RepliesI had been under the impression that if you had a PC with UEFI (instead of the legacy BIOS), you couldn't boot from a CD or DVD drive. Having just gotten my first PC with UEFI, I was delighted to find this Dell article on how to do it here:
[URL]
I followed that procedure on my new Dell Inspiron 15 5559 laptop, and booted Linux Mint successfully from the DVD I have it on. One of the considerations is that you have to disable "secure boot". Not ever having had that before, I didn't hesitate to do that. I imagine that would be a handy feature if you were worried about boot sector viruses, but I've never seen but one instance of one in 35 years of working with PCs, and that was on a neighbor's PC. I also noticed that booting was considerably faster.
I've had Win10 installed for ages and no problems until Upgrade 1511 came along. How come Windows 10 worked all that time and now refuses to upgrade?
Upgrade to Windows 10 Home, version 1511, 10586
error message:
"Windows 10 couldn't be installed
*Windows couldn't be installed because this PC has an unsupported disk layout for UEFI firmware."
I upgraded to Windows 10 from Windows 7 (32Bit), Since, I have lost access to my DVD drive. The Device Manager shows:
The drive has always been connected and worked fine with Windows 7; the hardware has never been altered or messed about with.
So I decided to check the UEFI Firmware Settings via Settings>Recovery>Advanced Set Up>Troubleshoot>Advanced Options I don't get the option to enter UEFI Firmware Settings; All I get is the System Restore, System Image Recovery, Startup Repair, Command Prompt and Startup Settings.
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6
GPT Partition Scheme for UEFI
Fat 32
8192 Default
X Quick Format
X Create a bootable disk using
X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
I did something terrible to my tablet, I converted the partition from GPT to MBR in a desperate try to install windows 7.Now tablet is not reading any usb I plug in, and of course I cannot format disk again because it doesn't recognize anything, always booting at uefi shell.
View 7 RepliesHow do I change this screen? Change in non Uefi Mode? My motherboard is 5 years old. Can this be done without switching to UEFI?
View 2 Replies