Settings Can't Be Opened Using Built-in Administrator Account
Jun 17, 2015
I installed Windows 10 from Windows 7, and now I can't open Settings using my account (which is an administrator account). I apparently have to use a different account, but I don't have one, and with no access to Settings, I can't make another account. I tried booting into Safe Mode, but I couldn't create an account there, either -- I clicked "create new user in PC settings" (or something along those lines), but nothing happened.
I can't use any of the panes (calendar, weather, store, etc.) on Windows 10. I receive a message "this app can't open. Mail can't be opened using the built in administration account.
If I boot normally, all three accounts, including the built-in Administrator account become Standard accounts, even though they were all setup as Administrator.
If I boot to Safe mode or Safe Mode with Networking then they all are Administrator accounts.
Right now I'm running Windows Repair All-In-One. Will see if that works.
This computer also boots to a black screen two out of three times (not always though, sometimes more, sometimes less.). If WRAIO doesn't do the job I'll tray a Refresh. If no joy there then I'll clean install. I have a good Macrium image backup so won't lose anything no matter what I do.
I changed the settings on 'netplwiz', and made the account 'Homegroupuser$' an administrator, and removed the administrator privileges for the account i use. now i cant access any administrative settings.
I've Dell latitude 3330 which is connected to school domain. Before i disconnected from school domain i created user name- Admin but forgot to set it in Administrator. I'm now in Standard User instead of Administrator. But some how Built-in Administrator account is enable but i don't know the password of Built-in Administrator account. Is that possible to reset Built-in Administrator password?
i have a clean install of windows 10 pro, before i had a windows 7 and was using the built-in administrator account without problems.
Now in windows 10 i'm using the built in administrator account but facing problems
1) if i leave the "security settings==>local policies==>security options==> User Account Control: Use Admin Approval Mode for the built-in Administrator account==> disabled" as it is the default option i can't run the new windows programs like settings, edge... etc.
2) if i change User Account Control: Use Admin Approval Mode for the built-in Administrator account to enabled, i can't install certain programs and also i have to run some applications as administrator (which i don't want to do for every application and that's why i use the built-in administrator account), to get full access to the windows drive "c:" and it's subfolders.
I would like to use some of the features that require you to log in with a Microsoft account rather than my own local administrator account. But when I did that, it totally changed my settings for my local account including desktop, etc. So I deleted the Microsoft account. how to keep my local account settings when signing in with a Microsoft account.
I just recently downloaded Windows Ten today 7/29/2015 and I wanted to personalize my computer. I opened the start window and clicked settings. The window flashed up but then disappeared. It isn't showing up in my taskbar or in task manager. I tried accessing it from the tile itself and the little button on the side of the window. I also asked Cortana. All of the results were the same?
"Your internet security settings prevented one or more files from being opened".
First Disk Management doesn't work, now this?
My Windows 10 Experience is being top notch.
Been searching around and people say to reset IE, but Windows 10 doesn't have IE, I deleted some files from AppData like someone said to be able to reset Edge.
Same thing happens, I'm getting quite annoyed at this.
I recently downloaded Windows 10. For some reason, my account on the computer --which is the only account on the computer-- is a 'standard account'. Because of this, I can't download or make some important changes that I need to make. I admit that I'm not computer savvy, but I've tried a few things. I've tried activating the 'hidden' Windows 10 administrator password but I can't because you have to run the cmd as an administrator to do this [when I try it doesn't give me the option to click yes]. I also tried adding family members to my account in order to make those accounts administrators. I created new email addresses, send the invitation, and accepted the invitations, but every time I log on to my Microsoft account, it still states that they invitations are pending.
I have been running windows 10 for a while now, without any BSOD whatsoever. About a month ago I added a new account and made it my administrator account, then changed the privilege on my original account to standard user account. No issues in doing so. I have been successful, in the past, in switching back and forth from admin to user accts with no problems. Today, though I logged into the admin account to do some updates. But after about 1 to 2 minutes into logging onto it, I get the BSOD with the error bad_pool_caller. The only thing that I had recently done was to install the beta version of Malwarebytes anti-ransomware (last night). The first thing that I did after getting these crashes was to uninstall that program. Unfortunately, that did not fix the problem (or was not the problem, I'm guessing). When I am logged into the standard user account I can run all day with no BSOD. I don't know any correlations between the admin account and the BSOD other than maybe there are some drivers it is looking for? Every time it crashes it says that it is collecting data before closing down. I went ahead and downloaded the dm_log_collector file and am submitting it.
I got 2 new computers with Windows 10. When I tried using one computer and somehow I just keyed my email and password and thereafter every time i start my computer i had to key in the password. I then wrongly deleted the administrator account. Now i cant restore the administrator account. I have tried everything suggested on the net. If I have to reinstall windows 10 to solve the problem
So I upgraded my Windows 7 to 10 a few weeks ago and have been loving it. Decided to upgrade my parents computer to it as well yesterday. When my mom wanted to play a Free Cell game they were asking me to log into a hotmail account. They only have an Aol email account. Figure I'd sign into mine really quick and that would be the last I'd heard of it. Unfortunately now the computer associates a random hotmail account of mine that I have lying around as their main "administrator" account. What's worse, now they need to use my password whenever they turn the computer now.
That's really silly How do I delete my administrator hotmail account from their computer? I don't want them to deal with having to remember a password for an account I rarely use myself. Its their computer, not mine.
As the subject line says, how can i get my sons account off his old computer that was upgraded to Windows 10 and change it to my parents info. We will be giving them my sons old computer.
I have purchased a laptop from a friend. Just prior to my purchase Windows 10 got loaded. The compter has one account which is an administrator account. I think that the same account information is used as a login to Microsoft. I would like to remove the account and substitute my own administrator account. How do I do that.
I am currently on a different computer than the one where I am locked out of the Administrator account.
Less than 3 weeks ago, I bought a new laptop that came with Windows 10 installed. When I finally set up the new laptop and tried out Windows 10 for the first time, I was annoyed at the whole thing with Windows blocking some programs from being installed and a lot of other annoying prompts. This is when I found out about a higher level of Administrator access known as a Super Administrator to avoid most of these prompts, and install programs without being blocked by Windows. So what I did created a new user account with the Command Prompt and gave it Super Administrator access without setting a password. Once I logged into my new user account, I deleted all of the other user accounts on my computer, since I had no need for the other user accounts (such as the Guest account).
The real trouble happened when my computer crashed and experienced a BSOD. After the computer rebooted from the BSOD, I found out that I could not log into the Administrator account because it prompts for a password, but I never set up a password for the account. Inputting no password does not work. I am not sure how a password was set up on the Administrator account without my knowledge and whether this might have been related to my BSOD crash.
I have made an attempt to get back into my only user account, but nothing has worked so far. All of the built-in Windows diagnostic tools have failed to work, since they all require that I log into the Administrator account, which I am unable to do. My original plan was to use the option to reset my PC that lets me keep my files, but that won't work without having access to the Administrator account. What password is on my Administrator account considering that I never set up a password and somehow the account now has a password on it. How to get back into my Administrator account?
After I had installed Windows 10, I restored some backup files I had from another computer using Windows 7. When I tried to access the files, I was told that none of my software could load the files. After doing some research on several of the Windows forums, I found out the account I had been using from the very beginning was not the "real" Administrator account. As such, I could not change any of the User Privileges. Research again indicated I needed to "activate" the EUC Administrator, which I did.
However, I was never asked for a Password when it was activated. Now, when I try to access the new Administrator account, I can't get past the Logon screen as I do not have a password. I have tried ALL the passwords I can remember from both the current Windows 7 and 10 User/Administrator accounts on this and the other computer, all to no avail. HOW do I either determine what the "default" password is or how do I change the "default" password without knowing what is in the system right now?
I found my computer updating itself, and it said I would be excited about the new updates. Well now when I click my calculator it says that it cannot be used in my Administrator Account and it asks me to sign in again with another Account. It was working before in my Administrator Account, why not now?
To say the least, I am NOT excited about this at all. Is there anything that I can do to get it working again? I tried right clicking it to see if I could open it with my Administrator, but nothing was there for me to do that with.
I am logged in to Windows 10 Pro as an Administrator. The operating system refuses to allow me to unzip an executable file to a folder on my C Drive failing because an Administrator account is required. It does not give me the option to provide my password to authorize the process. This problem surfaced when I did the free upgrade from Windows 7 to Windows 10 late last year. I found search results info suggesting that an embedded manifest embedded in the file may be involved. I can't find a folder where I am allowed to unzip the file.
When I "upgraded" to Windows 10, apparently I set up everything on the local administrator account. When I went to set up a separate account yesterday it disabled me from getting onto the administrator account, which is where I have everything set up. When I go to log in, both accounts are on the log-in screen but it won't take the passwords for the administrator account, which I know are correct and it even gives me the right hints but won't accept the pw. It says, "Your password was changed on a different device and you must sign in to this device once with your new password and then you can sign in with your new PIN. Well, I haven't added any devices, just a new local account. I really need to get back into the administrator account since that is where everything is. I've done the prompt, CMD, net user administrator /active:yes and it just denies access obviously because I am logged in as an administrator.
Windows is frustratingly taking up all of my time and I have tried everything google has to offer to try and fix it but it seems like no one has screwed up as much as I have on whatever forum.I'm trying to set my account to administrator because I can't install programs, change account settings, make any changes through CMD without getting the system error 5 access denied message and I can't set the administrator account through CMD either. I also don't have the permission to change anything in regedit and I can't even reset my pc because it requires an administrator password which I don't have, is not "nothing" nor is it administrator or admin or password and I can't change it through cmd either.I can't even access the administrator account because it is disabled and even with an elevated cmd I can't activate the "hidden" administrator account.
I had upgraded to Windows from windows 8.1 to windows 10. When I was on windows 8.1, I enabled built-in Administrator account and that is the only user which has the admin privileges.
But after upgrading to windows 10 that built in Administrator is disabled and none of the users are having admin privileges. Now what is the way to get admin privileges on one of the users or get the built-in Admin user enabled?
I have purchased a used Asus laptop that already has Win 10 installed on it from the original owner. All of the settings on the computer are linked to that owner's Microsoft account and administrator account. Is there a way for me to change the administrator information to my Microsoft account and email? I can log in using the old owner's password to access the administrator account, but I don't see any way to change the account to my information. If I create a new user account and make it an administrator account, when I log in using the new account, there is no access to any of the apps I need from the original account.
Upgraded to W10 from W7 several months ago now and activated and used only the built-in Administrator account. Which is what I have done for many years now to stop the UAC popups.
However, I have soon discovered this Administrator account, while blocking the UAC popups has some serious limitations. Like cannot run Edge or any of the Metro Apps. Yes, I have tried the workarounds but they too have issues.
So how can I transferred all my settings for my programs and windows to another local username?
