I've been experimenting with setting up an old PC (running 10) as a NAS, and I've created a few shared drives with specific ones allowing access to specific users. Most of the shared drives will accept my login info, which is the exact same on my desktop (the client PC). This allows me to basically just access every share without mapping them when on VPN. However, one of my shared drives is not shared to that same username. When I try to map it with the different credentials, it fails because the other shares are mapped with my other credentials, and it's not letting me map one shared drive with different credentials then all the others?
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
I recently upgraded to Windows 10, Put OS onto SSD along with a few other essentials and have a second hard drive for storage.The shared Pictures, Videos, Documents (etc) folders were all by default on my relatively small SSD. how to move location of the folders (right click the relevant folder, select 'Properties', then select 'Location', then 'Move', browse to where you want it to go . . .)
Here's the thing, in the process of moving my 'Pictures' folder to what is currently labelled as my F: drive, I managed to browse to F - but not actually select a folder.My 'Pictures' location is now my F: drive , oops, I'm now feeling like a bit of a donkey! but hey ho, I'll just move 'Pictures' again - to a folder this time - with a name right? - NO, that wont work - I guess because it now thinks I want to move the entire contents of my F: drive maybe?
OK - well, there's an option to 'Restore Default' (within the Location tab) - I select that and it looks promising, the original target on my C: drive shows in the window but upon pressing 'Apply' it then asks:Do you want to move all of the files from the old location to the new location?
Old location: F: New Location: C:UsersLaptopPictures
We recommend moving all of the files so that programs needing to access the folder's content can do so.And if I press yes, I get:The folder can't be moved hereAccess is denied.Basically the same issue again - The 'Folder' in this case is my F: drive that has other shared folders within it - so I guess that's why I can't do this?So, currently I have a drive as a location for my 'Pictures' not a convenient holding folder within that drive.The method for moving all the other folders has been fine (where I actually moved them to named folders on a different drive).
once they joined domain with Windows 10 and accessing Domain joined servers or resources - it constantly prompts for credentials to open (shared drives or folders) - I have my Windows 8.1 desktop using the same credentials and accessing the same resources with no issues. Just the preview on my laptop is experiencing this, is there a new security setting in 10 that handles domain credentials that's causing this?
How do i actually fix this? I got to the app and press the fix account, a popup quickly comes up and goes away but doesnt fix. Then after awhile, it is back to normal to only ask for it later on. Issue on both my pc and sp3
Ok, so i've just upgraded from Windows 10 Home to the Pro edition.
The user account on the PC is currently linked to my MS account. However, this particular PC is for my two part-time workers who I want to be able to login using their 365 credentials.
Having problems with Windows 10 asking for credential verification multiple times? I can get this multiple times a day. I also tried deleting all the credentials related to my account & it appeared to work temporarily & then went back to having credential problems again.. I believe it's something server side because I can verify & then sometimes immediately you are asked to verify again or few minutes/hours later it asks again.
When I look at my account online, sometimes it will show multiple "Surface" computers with the same S/N or with no S/N (Now this doesn't always happen) I also notice with my email accounts (While using the native Win10 email app) it will state my account is out of date & it will no longer send/receive emails. This happens on 2 MS accounts & 1 gmail account. I have actually reinstalled Win10 & the problem has only gotten worse. Before it used to only happen maybe once every few days.
When Win10 needs verification again, sometimes the store apps will won't open until you verify again. All regular desktop apps continue to work just fine during this process. Also, updates to Win10 & the store apps may stop updating if it's not verified once again.
Another strange issue with Windows 10, one I thought I had resolved but the problem appears to have come back.
Both accounts on my Surface Pro 3 are now being prompted each login to "Click here to enter most recent credentials", which takes you to accounts and then verifys the accounts identify. It's everytime and it seems to knock everything off. Cortana needs to be setup again and I don't think calendar and outlook work until I've verified the account.
As mentioned I found a resolution which resolved the problem, but it re-appeared again sometime this week so what is the reason for it happening and a permanent resolution. Never had the issue on Windows 8.
Several PCs in my store.. some running W7 starter, some W10 Home pro.
A few days ago suddenly I could no longer access a folder on another W10 computer, where we tend to store a lot of important documents. The computer where the other folder is, runs also W10.
Shares are usually done vie HomeGroup - share with home group users.Other computers on the network have no problem accessing it. Furthermore, I can access it from another local account on my computer, but not from my main account (which is a MS account)..It asks for credentials, although I am a homegroup user.. nevertheless I enter the other computer's only username and password (admin ones) and it still does not let me in. Try my own MS user and pass - also "wrong".
Tried leaving and joining the Homegroup.
Tried restarting network related services and setting them on Automatic.
Tried homegroup troubleshooter - says probable problem is with network, so should run Network troubleshooter.
I do so and it shows error:This network troubleshooter shows error: resource (peer to peer grouping) is online, but not responding to connection attempts.
Following the latter and some google searches, I tried adding DisabledComponents" DWORD with "0"value in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTCPIP6Parameters But still NO-GO.
Notification pops up with a red X saying I need to verify my account credentials and when i click it, it takes me to my user page where i need to click verify to enter my password but it just activates.
Am trying to install build 10074 on a freshly formatted (no dual boot) 256GB SSD in my Dell XPS 12 via USB. I get through the installation, reboot, do the initial setup, provide my MS account, then get stuck. White screen with frozen ball circle and "Just a moment..." displayed.
I upgraded my laptop and desktop to Windows 10. Everything OK after re-setting up Homegroup, including file and printer sharing. However, shared printers on desktop suddenly have become invisible to laptop, although shared files are still visible. I deleted the homegroup and set up a new one - same problem, shared printer invisible from laptop, shared files visible.
I m have activated my windows 7 on laptop using same shared key used for my business computers. If I will upgrade my laptop to windows 10, will it affect other computers which are using same key.
I cannot add a printer that is connected to a PC with Windows 10 installed. Client OS is Windows XP.
When I try to open "WIN10COMP" and doubleclick on printer name, I get: "Operation could not be completed. Access is denied.".
When I try to add this printer using master, after entering credentials I get: "The credentials supplied are not sufficient to access this printer. Do you want to specify new credentials?".
I can browse a shared by Windows 10 folder, create, edit and delete files in that folder, though.
I have a 2 desktops and a laptop all running Windows 10 Home.
I have a Homegroup that is working and I can see and access the shared folders on each machine.
I can see and connect to the printer on Desktop 2 from the laptop but not Desktop 1's printer. That printer is on and working properly on Desktop 1.
This previously worked fine. I think it stopped working when I updated to the new Windows 10 update yesterday on the laptop and Desktop 1. Desktop 2 has not yet been updated.
I have rebooted both computers and ran the Homegroup Troubleshooter which could not find any problems.
I have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
Clean W10pro installation from scratch. No upgrade. Quad Core intel @ 3.??ghz with 4GB on an intel board. Basic workhorse machine. Windows is up to date and nothing else has been installed to the machine. No changes to OS from defaults upon installation. Device Manager shows all attached devices are working properly. USB Wireless card connects to the access point just fine.
ICS is enabled on this adapter and shows as "shared". Ethernet adapter is auto-configured by ICS (IP and SUBNET). This adapter displays as "Unidentified Network" with or without cable connected. Under Status/Details: NO gateway. NO DNS servers.
Client Computer: same basic machine as above. Everything updated and functional.Ethernet adapter wired with standard ethernet cable to Host. (All this gear is modern and will not require hardline crossover)Ethernet adapter is set to obtain IP/DNS automatically.Under Status/Detail IP Address is 192.168.137.124 (DNS is working properly)Ping 192.168.137.1 successful without errors.
I disabled the firewalls. No improvement. Reset everything to defaults. Tried a "Bridged Connection" same "No Internet Access" results. In the end everything works except no internet access across the two adapters in the Host machine and there should be.
My question is in regards to shared folders. I run a desktop and laptop connected by ethernet, through a router. Both machines run Windows 10 Pro. Both machines have static IP addresses setup in the router. I do not use a software firewall and both computers are allowed onto the network.
I share folders on both machines in order to run client software on the laptop which connects to the flight simulator on the desktop. All of the shared folders have full control setup for everyone in both security settings and the shared folders tab.
There are HomeGroups set up on both machines with the correct information.
The problem (finally you say) is that occasionally, one computer cannot open the shared folders on the other over the network. This doesn't happen all the time, nor is the solution consistent. Sometimes closing and reopening the network folder fixes it. Sometimes just waiting does it. Other times, I have to reboot the computer(s). This creates issues with my client software trying to connect to the desktop. The error is: 0x80070035 Windows cannot find.....(to paraphrase).
I should point out that the other machine shows up in the network folder. I just can't access it when this happens. This happens mainly on the laptop attempting to connect to the desktop, although once in awhile the desktop cannot find the laptop.
I have checked and rechecked settings, deleted and rebult the HomeGroup, ensured password protected sharing is off, network discovery is on; amongst other things. I read about changing the shared computer name to its IP address. I also read somewhere about changing a number of registry entries that would force a change in Windows network behaviour.
I am running Windows 10 and trying to set up a network so that I can transfer photos from an android phone onto my laptop hard drive for back up. I've been using an app to do this and it has worked in the past brilliantly (called "Sweet Home" if interested). Unfortunately since upgrading to Windows 10 and changing my phone it doesn't work. I have also been trying to test the network using ES File Explorer. I have tried setting this up on another laptop running Windows 8 and it works no problem, so the issue must be with my settings.
I have set up a home group, made sure everything is shared where it should be and permissions set so that the network should be visible to everyone, but the android device can't see the network at all. For reference when setting up the network I followed the step by step in the link below on the Windows 8 laptop and it worked. [URL] ..
One strange point that I think might be related on the Windows 10 laptop, is when I get to Step 2 (of the link above) under "How to enable sharing on Windows?" the "Share" button is greyed out, even when the folder is not shared. I have to share it by clicking the "Advanced Sharing" button instead.
I have two laptops, both sitting next to the WiFi but from some reason I cannot see any shared device on laptop 1.
And on laptop 2, I can see all the devices with shared files in them. I can even access the shared files in laptop 1, but I cannot see the shared files on laptop 2.
I just installed Windows 10 on both of them, same method, same software, same laptops that is same model.
I finally got a PSU for my fileserver, and got it tested. It world perfect, but! I got a little problem, me and my stepdad is gonna use this server (it's mine) and I want both of us to access it from all our pc's and write to it. I didn't get it working when I had my NUC as a temp server. And I really want it do work now. So me and my stepdad can write data to it over the network.
